Issue 3, 2018

Facile preparation of monodisperse NiCo2O4 porous microcubes as a high capacity anode material for lithium ion batteries

Abstract

Binary transition metal oxides have attracted great attention as high-performance electrode materials for lithium-ion batteries in recent years. Herein, monodisperse NiCo2O4 porous microcubes were prepared for the first time via a simple urea-assisted solvothermal method followed by a thermal decomposition process. The porous microcubes assembled by nanoparticles with a size of ca. 35 nm have an average edge length of 1.5 μm. Nitrogen sorption isotherms show that this structure possesses a high surface area of 26.26 m2 g−1 with an average pore diameter of 22.57 nm. The rich mesopores among NiCo2O4 microcubes not only provide a large electrode/electrolyte reaction interface, but also provide enough void space to accommodate the volume change and prevent electronic disconnection in the electrode material during cycling. Furthermore, primary nanoparticles with a smaller size within microcubes can facilitate rapid Li-ion transport. So, when the as-prepared porous NiCo2O4 microcubes are used as anode materials for Li-ion batteries, they exhibit high-rate capability and outstanding cyclability.

Graphical abstract: Facile preparation of monodisperse NiCo2O4 porous microcubes as a high capacity anode material for lithium ion batteries

Supplementary files

Article information

Article type
Research Article
Submitted
17 oct. 2017
Accepted
25 déc. 2017
First published
28 déc. 2017

Inorg. Chem. Front., 2018,5, 559-567

Facile preparation of monodisperse NiCo2O4 porous microcubes as a high capacity anode material for lithium ion batteries

Y. Wang, J. Li, S. Chen, B. Li, G. Zhu, F. Wang and Y. Zhang, Inorg. Chem. Front., 2018, 5, 559 DOI: 10.1039/C7QI00648A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements