Cheol Ho
Heo‡
a,
Avik Ranjan
Sarkar‡
a,
Sung Hoon
Baik‡
b,
Tae Sung
Jung
a,
Jeong Jin
Kim
a,
Hyuk
Kang
a,
Inhee
Mook-Jung
*b and
Hwan Myung
Kim
*a
aDepartment of Chemistry, Department of Energy Systems Research, Ajou University, Suwon 443-749, Korea. E-mail: kimhm@ajou.ac.kr; Fax: +82-31-219-1615
bDepartment of Biochemistry, Biomedical Sciences College of Medicine, Seoul National University, Seoul, 110-799, Korea. E-mail: inhee@snu.ac.kr
First published on 7th April 2016
The formation of beta amyloid (Aβ) plaques in specific brain regions is one of the early pathological hallmarks of Alzheimer's disease (AD). To enable the early detection of AD and related applications, a method for real-time, clear 3D visualization of Aβ plaques in vivo is highly desirable. Two-photon microscopy (TPM) which utilizes two near-infrared photons is an attractive tool for such applications. However, this technique needs a sensitive and photostable two-photon (TP) probe possessing bright TP exited fluorescence to impart high signal-to-noise (S/N) visualization of Aβ plaques. Herein, we report a quadrupolar TP fluorescent probe (QAD1) having large TP action cross section (Φδmax = 420 GM) and its application for in vivo TPM imaging of Aβ plaques. This probe, designed with a centrosymmetric D–A–D motif with a cyclic conjugating bridge and solubilizing unit, displays bright TP excited fluorescence, appreciable water solubility, robust photostability, and high sensitivity and selectivity for Aβ plaques. Using the real-time TPM imaging of transgenic 5XFAD mice after intravenous injection of QAD1, we show that this probe readily enters the blood brain barrier and provides high S/N ratio images of individual Aβ plaques in vivo. We also used QAD1 in dual-color TPM imaging for 3D visualization of Aβ plaques along with blood vessels and cerebral amyloid angiopathy (CAA) inside living mouse brains. These findings demonstrate that this probe will be useful in biomedical applications including early diagnosis and treatments of AD.
Two-photon microscopy (TPM) is an attractive tool for such applications. TPM uses two near-IR photons (>700 nm) that have deep tissue imaging and intrinsic sectioning capability.4 It provides three-dimensional (3D) visualization deep inside of intact tissues with high spatial resolution, which is essential for noninvasive applications. With the progress of micro-endoscopic and video-rate scanning systems,5,6 TPM also has great potential for clinical uses including early diagnosis, monitoring therapy, and precise treatments. However, for practical applications of TPM, the technique should be combined with a sensitive and photostable TP probe possessing bright TP exited fluorescence (TPEF) to impart high signal-to-noise (S/N) visualization.7
To visualize Aβ plaques, a variety of small molecule fluorescent probes have been developed,8,9 of which bis-styrylbenzene derivatives such as MeO-X04 have often been used for in vivo TPM imaging.10 However, their uses in TPM are limited by small values of the TP action cross section (ΦδTPA) represented for TPEF intensity and/or low water solubility.9a Further, the open chain system of the conjugating bridge (CC) in these probes could lead to fast photobleaching due to photochemical instability processes such as photo-isomerization, thereby making long-term imaging impractical.11 Hence, there is a critical need to develop a TP probe for in vivo imaging of Aβ plaques with larger value of ΦδTPA, good water solubility and photostability.
Toward this end, we designed a quadrupolar TP scaffold with a cyclic conjugating bridge (1, Scheme 1). Regarding the ΦδTPA value, the magnitude of TP absorption cross section (δTPA) of a molecule is mainly proportional to the extent of intramolecular charge transfer (ICT) character, caused by electron donating and accepting ability, increasing conjugation length, conformational restriction and symmetry, etc.12 Among various types of TP absorbing dyes, electron donor (D)–acceptor (A) substituted quadrupoles (D–A–D), with a centro-symmetric molecule bearing the quadrupole moment, have been identified as the most promising motif for large δTPA values.12b In addition, multi-fluorinated core containing bis-styrylbenzene derivatives have been shown to exhibit selective binding affinity for Aβ plaques.8f Therefore, we designed D–A–D type quadrupolar probes for Aβ plaques possessing amino groups as strong electron donors and tetrafluorobenzene as the electron acceptor (1–3, Scheme 1). The CC bonds were encapsulated within an indolyl cycle with an expectation of higher photostability than the open chain system. We also introduced ethanol as a neutral solubilizing group at the terminal amine (2, QAD1) or the indolyl amine (3) for effective staining to Aβ plaques through the penetration of the blood brain barrier (BBB).
Herein, we report a quadrupole TP probe for Aβ plaques (2, QAD1, Scheme 1) that showed a ΦδTPA value larger than 420 GM with resistance to photobleaching, high binding affinity for Aβ plaques, and the ability to penetrate the BBB, thereby allowing real-time, high spatial resolution 3D imaging of Aβ plaques in vivo for an extended period of time.
First we examined the photophysical properties of 1, QAD1 and 3 in various solvents. The solubility of 1 in phosphate buffer saline (PBS, pH 7.4), determined by a UV-vis titration method, was 1.0 μM, while those for QAD1 and 3 were found to be 4 and 3 μM, respectively (Fig. S1, ESI†), indicating that QAD1 has higher solubility in PBS buffer. Next we tested a sensitivity to the solvent polarity. The emission maximum (λfl) of compound 1 was gradually shifted to the red region with increasing solvent polarity from 1,4-dioxane (489 nm) to EtOH (515 nm), whereas no emission was observed in buffer, which might be due to the negligible solubility in buffer (Fig. S2 and Table S1, ESI†). QAD1 showed similar behavior except that the λfl in buffer (10 mM PBS, pH 7.4) appeared in a more red-shifted region (546 nm) than in EtOH (Fig. 1a and b), indicating that QAD1 was a polarity sensitive probe. Further, the λfl of QAD1 in the presence of Aβ aggregates, a good model for the Aβ plaques in aged mouse, was blue-shifted (λfl = 510 nm) from that in PBS buffer, which agreed with the λfl measured in EtOH (Fig. 3a). A similar result was obtained from the QAD1-labeled Aβ plaques in sections of the transgenic mouse brain (508 nm, Fig. 1b), indicating that EtOH can adequately represent the polarity of microenvironment of the Aβ plaques (see below).
Then we characterized the photophysical properties of 1, QAD1 and 3 in EtOH and the results were summarized in Table 1. The one-photon brightness (εΦ) of QAD1 was significantly larger than that for 1 (Fig. 1c and Table 1). Interestingly, compound 3 showed dramatically reduced brightness with blue-shifted absorption spectra (Fig. S3, ESI†), although it also displayed a solvatochromic shift (Fig. S2 and Table S1, ESI†).
Probe | λ (1)max (10−4ε) | λ flmax | Φ | λ (2)max | δ | Φδ |
---|---|---|---|---|---|---|
a All the measurements were performed in EtOH. b λ max of the one-photon absorption spectra in nm. The numbers in parentheses are molar extinction coefficients in M−1 cm−1. c λ max of the one-photon emission spectra in nm. d Fluorescence quantum yield. e λ max of the two-photon excitation spectra in nm. f Two-photon absorption cross-section in 10−50 cm4 s per photon (GM). g Two-photon action cross section in 10−50 cm4 s per photon (GM). | ||||||
1 | 413 (3.06) | 515 | 0.50 | 750 | 540 | 270 |
QAD1 | 426 (4.09) | 508 | 0.73 | 750 | 575 | 420 |
3 | 371 (1.46) | 521 | 0.03 | 720 | 80 | 2 |
To examine the large difference between QAD1 and 3, we computationally investigated their structures by density functional theory (DFT) at the B3LYP/6-31G* level.13 First, the energy difference between the cis and trans-isomer for QAD1 and 3, respectively, was almost the same (Table S2, ESI†). The optimum geometry for the ground state of QAD1 adopted a planar structure, whereas 3 had a distortion between the central π-core and the bridge heterocyclic ring (Fig. 2). We also investigated the distribution of MOs of the structures of these compounds (Fig. S5, ESI†). The results suggested that QAD1 had a smaller HOMO–LUMO energy (2.56 vs. 2.67 eV) with two-fold higher oscillator strength (1.91 vs. 0.98) than those for 3. Further, the distortion angle of 3 changed from the ground state (50.8°) to the first electronically excited state (37.7°) that can induce an efficient internal conversion, resulting in fluorescence quenching. Hence, the stronger brightness of QAD1 may be attributed to the planar structure, which can facilitate the effective ICT, whereas the weaker brightness of 3 may be due to the distorted structure, which may cause steric repulsion between the bis-ethanol and the π-core.
We then tested the selective binding profiles of 1, QAD1 and 3 for Aβ aggregates. Upon addition of Aβ aggregates (10 μM) in PBS buffer (10 mM, pH 7.4), the fluorescence intensity of QAD1 (1 μM) increased dramatically (Fig. 3a). The dissociation constant (Kd) value for QAD1/Aβ aggregates was determined by a fluorescence titration method and the value was found to be 16.2 nM, indicating higher binding affinity of QAD1 to Aβ aggregates than those for existing probes (Fig. 3b and Table S3 and S4, ESI†).8,9 A similar result was observed with Aβ oligomer (Fig. S6, ESI†), except that the binding affinity for QAD1/Aβ oligomer is slightly decreased (Kd = 21.5 nM). Moreover, QAD1 had negligible interaction with bovine serum albumin (BSA) and human serum albumin (HSA) under similar experimental conditions (Fig. S7b, ESI†). On the other hand, the increment of emission intensity of 1 in the presence of BSA or HSA was higher than that for Aβ aggregates (Fig. S7a, ESI†), indicating higher affinity for BSA and HSA. A similar result was observed for 3, except for its negligible emission intensity (Fig. S7c, ESI†). Therefore, the specific binding of QAD1 to Aβ aggregates over BSA (or HSA) is likely due to the enhanced solubility and its planar form. Further, the emission intensity of QAD1 was insensitive to pH changes in a biologically relevant pH range (Fig. S4, ESI†). These results revealed that QAD1 is a superior probe for sensitive binding to Aβ aggregates with minimum interference by BSA (or HSA) and pH.
Next, we evaluated the ΦδTPA value of QAD1 determined by the TP excited fluorescence (TPEF) method (ESI†). The Φδmax value of QAD1 was 420 GM at 750 nm (Fig. 1d and Table 1), which is a larger value than those for dipolar TP probes (∼100 GM).7 Moreover, the TPEF intensity of QAD1 in PBS buffer dramatically increased upon binding with Aβ aggregates (Fig. S8, ESI†). The smaller Φδmax value of 1 is mainly due to its smaller Φ value, and the minimum Φδmax value of 3 was likely due to its distorted structure, which may hamper the effective ICT (Table 1). In addition, the lipophilicity value (logPoct) of QAD1 was 3.42, obtained by partitioning between n-octanol and PBS buffer (Table S5, ESI†), which was a well-matched value with an estimated range (logP = 2.0–3.5) for penetrating the BBB.8c These outcomes suggest that QAD1 would be a sensitive TP probe for bright TPM imaging of Aβ plaques in vivo, as we observed (Fig. 6).
We next monitored the ability of QAD1 as a TP probe for Aβ plaques in brain tissues. Cortical slices were taken from a transgenic 5XFAD mouse, an AD model mouse forming Aβ plaques in the brain.14 Bright spots in TPM imaging were observed in the QAD1-labeled slice with the highest S/N ratio, while those labeled with 1 and 3 showed dim TPEF with significant background signal (Fig. 4). This observation might be due to the large ΦδTPA value and high sensitivity for Aβ plaques of QAD1.
To confirm whether QAD1 can specifically locate in Aβ plaques, we conducted a co-localization experiment between the probe and Congo red, a well-known fluorescent marker for histology of Aβ plaques.15 The bright TPEF regions of QAD1 merged well with signals from Congo red with a Pearson's co-localization coefficient of 0.85, confirming that the bright spots in the TPM images reflected the Aβ plaques (Fig. 5a–c). Here again, the TPEF spectrum from the Aβ plaques in tissue was symmetrical and matched well with the emission spectra acquired in ethanol (Fig. 1b). Moreover, upon excitation at 750 nm with fs pulses, the TPEF intensities of the spots remained nearly the same over 60 min (Fig. 5d and e). This high photostability is probably due to the structural motif of QAD1, encapsulating the CC bonds within a ring. Further, QAD1 showed high in vitro stability in mouse serum as more than 91% intact probe was recognized by HPLC analysis after incubation with mice plasma for 60 min (Fig. S9, ESI†). A cytotoxicity test using MTS assay on human neuronal cell line revealed that QAD1 has low toxicity (Fig. S10, ESI†).
Finally, we tested the utility of QAD1in vivo. The transgenic 5XFAD mice were anesthetized and a cranial window was surgically installed for direct TPM imaging. QAD1 (approximately 10 mg kg−1) was intravenously injected, then TPM images were immediately collected upon excitation at 780 nm. The initial images showed bright TPEF through the blood vessels in the cortex region (Fig. 6a). The bright intensities at the vessels rapidly decreased with a concomitant increase at the plaques (white arrows in Fig. 6b–d and S11, ESI†). Video S1† clearly visualizes the staining process of QAD1 to the plaques through penetrating of the BBB. Further, kinetic studies revealed that the circulating half-life (t1/2) calculated by the decay of TPEF intensity at the vessels is 35.7 min (Fig. S11, ESI†). In addition, the TPEF at the plaques appeared within 20 min and reached a peak level in about 2 h, from which the time constants for BBB penetration (to = 23.4 min) and plaque-binding (Δτ = 46.9 min) were calculated by using a sigmoidal Boltzmann equation. Moreover, when TPM images were acquired from regions of greater depth (Fig. 6e), the marked and individual plaques were clearly visualized with high S/N ratio.
Because 3D visualization of Aβ plaques along with blood vessels is important for clinical applications, dextran 40 kDa-Texas red, a well-known blood marker, was injected. Then, dual-color TPM images were immediately obtained along the z-direction at depths of more than 300 μm from the surface of the cortex. The 3D images were constructed from approximately 270 sections. As displayed in Video S2† and Fig. 6f and g, individual Aβ plaques of various sizes at the specific positions were clearly visualized along with blood vessels. Furthermore, cerebral amyloid angiopathy (CAA), which is another deposited Aβ form surrounding the wall of blood vessels of the central nervous system,16 were directly observed. These outcomes clearly demonstrate the utility of QAD1 for real-time, clear 3D visualization of Aβ plaques in vivo and the strong potential for its use in clinical trials for diagnosis and precise treatment of Aβ plaques.
To evaluate the cytotoxicity of QAD1 in SH-SY5Y cells (human neuronal cell line), MTS (cell Titer 96H; Promega, Madison, WI, USA) assay were performed according to the manufacture's protocol. The results are shown in Fig. S10 (ESI†), which revealed that the QAD1 has low cytotoxicity in our incubation condition.
To visualize QAD1 amyloid plaques staining in vivo, using LSM 7 MP two-photon laser scanning microscopy (Carl Zeiss Inc., Oberkochen, Germany) and titanium–sapphire femtosecond laser (Chameleon Ultra, Coherent, Santa Clara, CA), in vivo two-photon brain imaging was performed. Laser power was set to 30–50 mW and 780 nm wavelength was used for the brain imaging. For the deep tissue z-stack imaging, 1 μm interval was adjusted and 4D imaging was obtained by exploiting time-lapse z-stack imaging. Volocity (PerkinElmer, Boston, MA) software was used for rendering.
Footnotes |
† Electronic supplementary information (ESI) available: Synthesis, additional methods, schemes, figures, tables and videos (Scheme S1–S3, Fig. S1–S20, Tables S1–S5 and Video S1 and S2). See DOI: 10.1039/c6sc00355a |
‡ These authors equally contributed to this work. |
This journal is © The Royal Society of Chemistry 2016 |