Issue 36, 2023

Synthesis of ABx and ABxC poly(ester-ether) polymers: polymer sequences and effects of Bx and BxC units on thermal properties

Abstract

Ring-opening copolymerization (ROCOP) of cyclic anhydrides and epoxides has been under intensive investigation as a potential alternative approach for synthesizing tunable polyesters due to a wide range of monomer scopes compared to those of conventional cyclic esters such as lactides or lactones. While most catalytic systems focus on the alternate insertions of cyclic anhydrides (A) and epoxides (B) giving alternating (AB)n polyesters, the synthesis of ABx poly(ester-ether) polymers having controllable Bx ether sequences has recently gained significant interest for potential tunable functions. Herein, an ABx poly(ester-ether) with tunable ether linkages (x = 2.3–5.2) was synthesized conveniently from the ROCOP of cyclic anhydrides (succinic anhydride, phthalic anhydride, 1,8-naphthalic anhydride, terpene-based cyclic anhydride, maleic anhydride and diglycolic anhydride) and epoxides (cyclohexene oxide, cyclopentene oxide and propylene oxide) using commercially available tin(II) 2-ethylhexanoate (SnOct2) as the catalyst. Exceptionally high purity of ABx polymers up to 99% was achieved. Kinetic studies revealed the following rate law: rate = kp[SA][CHO]2[SnOct2]. The versatility of SnOct2 was demonstrated and allowed the ABx polymers to integrate with biodegradable polylactides and polyurethanes in one pot. THF or 1,4-dioxane (C) could be copolymerized as the third component in one pot giving a novel ABxC poly(ester-ether) with the highest selectivity of up to 74% for THF and 11% for 1,4-dioxane. The presence of Bx or BxC units was found to significantly accelerate the degradation rates of the polymers compared to conventional alternating (AB)n polyesters.

Graphical abstract: Synthesis of ABx and ABxC poly(ester-ether) polymers: polymer sequences and effects of Bx and BxC units on thermal properties

Supplementary files

Article information

Article type
Paper
Submitted
28 mai 2023
Accepted
15 août 2023
First published
15 août 2023

Polym. Chem., 2023,14, 4169-4181

Synthesis of ABx and ABxC poly(ester-ether) polymers: polymer sequences and effects of Bx and BxC units on thermal properties

N. Jabprakon, P. Chumsaeng and K. Phomphrai, Polym. Chem., 2023, 14, 4169 DOI: 10.1039/D3PY00605K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements