Issue 15, 2023

GeSe-evoked synchronous strategy for electrodeposited CZGSe solar cells

Abstract

Sn-free Cu2ZnGeSe4 (CZGSe) is emerging as a promising non-toxic and earth-abundant photovoltaic absorber material due to its attractive electrical and optical properties as well as its high theoretical conversion efficiency. Nevertheless, no photovoltaic device fabricated through the green electrodeposition process has yet been reported, likely due to the poor solubility of Ge-based salts and harsh electrodeposition conditions. Herein, we propose a GeSe-evoked synchronous strategy involving a Ge incorporation and selenization-regulated co-heating process of GeSe and Se, following electrodeposition of a Cu–Zn preformed layer. We experimentally found that the low-melting-point GeSe could promote the crystal growth and induce a high-quality bulk absorber layer and good back interface. In the GeSe-promoted sample, it was found that MoSe2 could ensure a good back quasi-Ohmic contact, and the band bending at the grain boundaries (GBs) was favorably inverted. Moreover, the depletion region width was also prolonged, and the deleterious CuZn near EF was passivated, leading to an increased carrier separation. In turn, a surprising progress in device performance was found, achieving a ground-breaking efficiency of 3.69%, and it could fill the bank of green electrodeposited CZGSe-based solar cells.

Graphical abstract: GeSe-evoked synchronous strategy for electrodeposited CZGSe solar cells

Supplementary files

Article information

Article type
Paper
Submitted
29 déc. 2022
Accepted
03 mars 2023
First published
01 avr. 2023

Nanoscale, 2023,15, 6976-6983

GeSe-evoked synchronous strategy for electrodeposited CZGSe solar cells

J. Liu, K. Gao, H. Cai, X. Wu, X. Liu, K. Cheng and Z. Du, Nanoscale, 2023, 15, 6976 DOI: 10.1039/D2NR07285H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements