Issue 14, 2022

Achieving 17.5% efficiency for polymer solar cells via a donor and acceptor layered optimization strategy

Abstract

Layer-by-layer polymer solar cells (LbL-PSCs) were prepared with PNTB6-Cl as the donor and Y6 as the acceptor by a sequential spin-coating method. Two solvent additives DPE and DFB were individually incorporated into PNTB6-Cl chlorobenzene solution and Y6 chloroform solution. A PCE of 17.53% was achieved for the optimal LbL-PSCs with two solvent additives, which is much larger than the PCE of 16.38% for the LbL-PSCs without solvent additives. Over 7% PCE enhancement can be realized by individually employing solvent additives in donor and acceptor layers, resulting from the simultaneously enhanced open circuit voltage (VOC) of 0.88 V, short circuit current density (JSC) of 26.63 mA cm−2 and fill factor (FF) of 74.83%. The photogenerated exciton distribution, charge transport and collection in the LbL-PSCs can be optimized by employing different solvent additives in donor and acceptor solutions. Meanwhile, the efficient energy transfer from PNTB6-Cl to Y6 can provide an additional channel for improving the exciton utilization efficiency through exciton dissociation at PNTB6-Cl/Y6 interfaces. Meanwhile, the PCEs of LbL-PSCs are better than those of bulk heterojunction PSCs with the same materials and solvent additives, indicating the great potential of LbL-PSCs for commercial application.

Graphical abstract: Achieving 17.5% efficiency for polymer solar cells via a donor and acceptor layered optimization strategy

Supplementary files

Article information

Article type
Paper
Submitted
03 janv. 2022
Accepted
01 mars 2022
First published
01 mars 2022

J. Mater. Chem. C, 2022,10, 5489-5496

Achieving 17.5% efficiency for polymer solar cells via a donor and acceptor layered optimization strategy

W. Xu, X. Li, S. Y. Jeong, J. H. Son, Z. Zhou, Q. Jiang, H. Y. Woo, Q. Wu, X. Zhu, X. Ma and F. Zhang, J. Mater. Chem. C, 2022, 10, 5489 DOI: 10.1039/D2TC00024E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements