Issue 12, 2018

Inserted metals for low-energy magnetoelectric switching in a Cr2O3/ferromagnet interfacial exchange-biased thin film system

Abstract

An inserted metal (IM) layer (such as Pt, Ru, or Cr) is typically fabricated between Cr2O3 and the ferromagnet in magnetoelectric switched antiferromagnet/ferromagnet exchange-biased thin film systems. The IM layer is used as a “spacer layer” to prevent oxidization of Co and enhance the blocking temperature. In this work, we found that the magnetic properties of these thin film systems vary depending on the type of IM, and they could be reproduced by bilayers or multilayers of Co and IM thin films. We also found that the IM layer was spin-polarized by the Co ferromagnetic layer based on X-ray magnetic circular dichroism data. These results suggest that the IM does not work separately as a “spacer layer”, but rather it is an integral component of Co-based stacked ferromagnetic films in magnetoelectric switched Cr2O3/ferromagnet exchange-biased systems. Furthermore, we found that some stacked ferromagnetic films easily exhibit a low unidirectional anisotropy energy (Jk), which may be a good way to decrease the magnetoelectric switching energy of antiferromagnets for practical device applications.

Graphical abstract: Inserted metals for low-energy magnetoelectric switching in a Cr2O3/ferromagnet interfacial exchange-biased thin film system

Article information

Article type
Paper
Submitted
23 nov. 2017
Accepted
20 déc. 2017
First published
20 déc. 2017

J. Mater. Chem. C, 2018,6, 2962-2969

Inserted metals for low-energy magnetoelectric switching in a Cr2O3/ferromagnet interfacial exchange-biased thin film system

S. Ye, T. Nozaki, Y. Kotani, K. Toyoki, T. Nakamura, S. Yonemura, T. Shibata, S. P. Pati, M. Al-Mahdawi, Y. Shiokawa and M. Sahashi, J. Mater. Chem. C, 2018, 6, 2962 DOI: 10.1039/C7TC05375D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements