Issue 48, 2015

Improved thermal stability and retention properties of Cu–Te based CBRAM by Ge alloying

Abstract

In this work we investigate the influence of Ge as an alloying element in Cu–Te based thin films for application as a cation supply layer in Conductive Bridge Random Access Memory (CBRAM). The thermal stability of the alloys and their functionality as a copper supply layer in CBRAM are investigated. The thermal stability is studied by means of in situ X-ray diffraction, which reveals information on phase separation, phase transformations and melting of the material. We demonstrate that addition of Ge to Cu0.6Te0.4 inhibits crystallization up to 300 °C. However, phase separation occurs upon crystallization, which might result in device to device variability when this occurs in memory devices. This is solved by using Cu2GeTe3 that forms a single phase upon crystallization. The most promising alloys are implemented in 580 μm diameter dot Pt/CuxTeyGe1−xy/Al2O3/Si CBRAM cells. Their functionality is verified by DC cycling and the influence of Ge is studied by comparing the switching to binary Cu0.6Te0.4 based memory cells. The retention of the programmed memory states is measured at 85 °C. Functional CBRAM is demonstrated, and improved filament stability and retention properties are observed for the Ge containing cells compared to Cu0.6Te0.4. We mainly attribute this to the Ge–Te bonds that are formed in the supply layer. This lowers the tendency for Cu–Te formation which results in a lower driving force for the Cu to go back to the supply layer, and hence contributing to a more stable filament. The formation of Ge–Te bonds was confirmed by XPS measurements.

Graphical abstract: Improved thermal stability and retention properties of Cu–Te based CBRAM by Ge alloying

Supplementary files

Article information

Article type
Paper
Submitted
04 sept. 2015
Accepted
04 nov. 2015
First published
23 nov. 2015

J. Mater. Chem. C, 2015,3, 12469-12476

Improved thermal stability and retention properties of Cu–Te based CBRAM by Ge alloying

W. Devulder, K. Opsomer, G. Rampelberg, B. De Schutter, K. Devloo-Casier, M. Jurczak, L. Goux and C. Detavernier, J. Mater. Chem. C, 2015, 3, 12469 DOI: 10.1039/C5TC02776D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements