Issue 6, 2024

Bioelectrochemically enhanced autotrophic Feammox for ammonium removal via the Fe(ii)/Fe(iii) cycle

Abstract

Autotrophic anaerobic ammonium oxidation coupled to Fe(III) reduction (Feammox) is a potential technology for removing ammonium from low-C/N wastewater, but it requires a continuous supply of Fe(III) source. To reduce the supply, a microbial electrolysis cell (MEC) was employed to allow iron recycling in Feammox under different voltages (0.2 V, 0.6 V, and 1.0 V). Results showed that the optimal voltage was 0.6 V, with a maximum efficiency for ammonium oxidation of 71%. The ammonium oxidation rate achieved 2.5 ± 0.1 mg N L−1 per day, which was 3 times that of conventional Feammox. Cyclic voltammetry confirmed that ammonium oxidation and iron redox occurred on the anode. The bacterial population had a unique evolutionary direction at 0.6 V, with Geobacteraceae becoming the dominant family. Positive interactions between nitrogen-related bacteria and iron-related bacteria enhanced the autotrophic Feammox process. This study will further advance Feammox in the treatment of ammonium-containing wastewater.

Graphical abstract: Bioelectrochemically enhanced autotrophic Feammox for ammonium removal via the Fe(ii)/Fe(iii) cycle

Supplementary files

Article information

Article type
Paper
Submitted
30 tammi 2024
Accepted
07 huhti 2024
First published
19 huhti 2024

Environ. Sci.: Water Res. Technol., 2024,10, 1355-1364

Bioelectrochemically enhanced autotrophic Feammox for ammonium removal via the Fe(II)/Fe(III) cycle

T. Wang, J. Zhang, Z. Wang, Q. Zhao, Y. Wu, N. Li, X. Jiang and X. Wang, Environ. Sci.: Water Res. Technol., 2024, 10, 1355 DOI: 10.1039/D4EW00074A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements