Muhammad S. Khan, Mohammed K. Al-Suti, Hakkikulla H. Shah, Said Al-Humaimi, Fathiya R. Al-Battashi, Jens K. Bjernemose, Louise Male, Paul R. Raithby, Ning Zhang, Anna Köhler and John E. Warren

Dalton Trans., 2011, 40, 10174
DOI: 10.1039/c1dt11010a

Aligned carbon and graphite fibers prepared from poly(3,4-ethylenedioxythiophene) single crystals synthesized by solid-state polymerization and their supercapacitor performance

Bairu Yan, Satoshi Matsushita and Kazuo Akagi

J. Mater. Chem. C, 2017, 5, 3823
DOI: 10.1039/C7TC00709D

The first direct experimental comparison between the hugely contrasting properties of PEDOT and the all-sulfur analogue PEDTT by analogy with well-defined EDTT–EDOT copolymers

Howard J. Spencer, Peter J. Skabara, Mark Giles, Iain McCulloch, Simon J. Coles and Michael B. Hursthouse

J. Mater. Chem., 2005, 15, 4783
DOI: 10.1039/b511075k

Towards crystal engineering of solid-state polymerization in dibromothiophenes

Marc Lepeltier, Jonathan Hiltz, Tobias Lockwood, Francine Bélanger-Gariépy and Dmitrii F. Perepichka

J. Mater. Chem., 2009, 19, 5167
DOI: 10.1039/b822997j

Facile polymerization method for poly(3,4-ethylenedioxythiophene) and related polymers using iodine vapour

Sonal Gupta and Asit Patra

New J. Chem., 2020, 44, 6883
DOI: 10.1039/C9NJ03923F

Synthesis and investigation of novel thiophene derivatives containing heteroatom linkers for solid state polymerization

Chuong Tusy, Lili Huang, Jingpeng Jin and Jiangbin Xia

RSC Adv., 2014, 4, 8011
DOI: 10.1039/c3ra45014g

Parallel design strategy and rational study of crystal engineering of novel 3,4-ethylenedioxythiophene derivatives for solid state polymerization

Chuong Tusy, Lili Huang, Kai Peng and Jiangbin Xia

RSC Adv., 2014, 4, 29032
DOI: 10.1039/C4RA01688B

Synthesis and photovoltaic properties of novel 3,4-ethylenedithiathiophene-based copolymers for organic solar cells

Xiuxuan Sun, Weichao Chen, Zhengkun Du, Xichang Bao, Guannan Song, Kangquan Guo, Ning Wang and Renqiang Yang

Polym. Chem., 2013, 4, 1317
DOI: 10.1039/c2py20995k

Selective bromination of 2,5-bis(2-thienyl)pyrroles and solid-state polymerization through the β-carbon of pyrrole

Palas Baran Pati and Sanjio S. Zade

RSC Adv., 2014, 4, 17022
DOI: 10.1039/C4RA01993H

Chain-growth cationic polymerization of 2-halogenated thiophenes promoted by Brønsted acids

Arumugam Balasubramanian, Ting-Chia Ku, Hong-Pin Shih, Alishetty Suman, Huang-Jyun Lin, Ting-Wen Shih and Chien-Chung Han

Polym. Chem., 2014, 5, 5928
DOI: 10.1039/C4PY00521J

Investigation of the substitution effect on poly(bis-3,4-ethylenedioxythiophene methine)s through solid state polymerization

Kai Peng, Tong Pei, Zhaoxiang Li, Lili Huang and Jiangbin Xia

RSC Adv., 2015, 5, 103841
DOI: 10.1039/C5RA21122K

2,5-Dibromothiophenes: Halogen Bond Involving Packing Patterns and Their Relevance to Solid-State Polymerization

Sergey V. Baykov, Sofia I. Presnukhina, Alexander S. Novikov, Anton A. Shetnev, Vadim P. Boyarskiy and Vadim Yu. Kukushkin

Crystal Growth & Design, 2021, 21, 2526
DOI: 10.1021/acs.cgd.1c00184

Poly(Styrene Sulfonate) Free Poly(3,4‐Ethylenedioxythiophene) as a Robust and Solution‐Processable Hole Transport Layer for Organic Solar Cells

Ranoo Bhargav, Dinesh Bhardwaj, Shahjad, Asit Patra and Suresh Chand

ChemistrySelect, 2016, 1, 1347
DOI: 10.1002/slct.201600202

An Aqueous Conducting Redox‐Polymer‐Based Proton Battery that Can Withstand Rapid Constant‐Voltage Charging and Sub‐Zero Temperatures

Christian Strietzel, Mia Sterby, Hao Huang, Maria Strømme, Rikard Emanuelsson and Martin Sjödin

Angewandte Chemie, 2020, 132, 9718
DOI: 10.1002/ange.202001191

Novel synthesis of poly(3,4-dinitro-thiophen-2-yl arylamine) derivatives via facile C–Br/N–H bulk polycondensation and its application of thermalsensor

Kai Peng, Qi Luo, Yichi Zhang and Jiangbin Xia

Polymer, 2020, 201, 122550
DOI: 10.1016/j.polymer.2020.122550

Functionalization of poly(bis‐thiophene methine)s via facile C–C bulk polymerization and their application as chemosensors for acid detection

Kai Peng, Tong Pei, Ni Huang, Liangjie Yuan, Xinghai Liu and Jiangbin Xia

J. Polym. Sci. Part A: Polym. Chem., 2018, 56, 1676
DOI: 10.1002/pola.29047

Synthesis of Conjugated Main-Chain Ferrocene-Containing Polymers through Melt-State Polymerization

Qi Luo, Rui Zhang, Jing Zhang and Jiangbin Xia

Organometallics, 2019, 38, 2972
DOI: 10.1021/acs.organomet.9b00312

Room Temperature Solid‐State Synthesis of a Conductive Polymer for Applications in Stable I2‐Free Dye‐Sensitized Solar Cells

Byeonggwan Kim, Jong Kwan Koh, Jeonghun Kim, Won Seok Chi, Jong Hak Kim and Eunkyoung Kim

ChemSusChem, 2012, 5, 2173
DOI: 10.1002/cssc.201200349

Solid-State Synthesis of a Conducting Polythiophene via an Unprecedented Heterocyclic Coupling Reaction

Hong Meng, Dmitrii F. Perepichka, Michael Bendikov, Fred Wudl, Grant Z. Pan, Wenjiang Yu, Wenjian Dong and Stuart Brown

J. Am. Chem. Soc., 2003, 125, 15151
DOI: 10.1021/ja037115y

Systematic study on chemical oxidative and solid‐state polymerization of poly(3,4‐ethylenedithiathiophene)

Shuai Chen, Baoyang Lu, Xuemin Duan and Jingkun Xu

J. Polym. Sci. A Polym. Chem., 2012, 50, 1967
DOI: 10.1002/pola.25971

Polymerization of Solid-State 2,2′-Bithiophene Thin Film or Doped in Cellulose Paper Using DBD Plasma and Its Applications in Paper-Based Electronics

Ketao Chen, Meijuan Cao, Zhen Qiao, Lin He, Yen Wei and Hai-Feng Ji

ACS Appl. Polym. Mater., 2020, 2, 1518
DOI: 10.1021/acsapm.9b01202

Solid-state synthesis of conjugated doped poly(3,4-ethylenedioxythiophene): An effective adsorbent for selective anionic dye removal

Sonal Gupta, Anamika Mishra, Rachana Kumar and Asit Patra

Reactive and Functional Polymers, 2021, 165, 104972
DOI: 10.1016/j.reactfunctpolym.2021.104972

Synthesis of Metal-Containing Poly(thiophene methines) via Solid- and Melt-State Polymerization and Their Related Applications as Highly Sensitive Ni2+ Chemosensors

Qi Luo, Kai Peng, Jing Zhang and Jiangbin Xia

Organometallics, 2019, 38, 647
DOI: 10.1021/acs.organomet.8b00830

Effect of Structural Factor on the Electropolymerization of Bithiophenic Precursors Containing a 3,4-Ethylenedisulfanylthiophene Unit

Mathieu Turbiez, Pierre Frère, Magali Allain, Nuria Gallego-Planas and Jean Roncali

Macromolecules, 2005, 38, 6806
DOI: 10.1021/ma050655q

Poly(3,4-ethylenedioxyselenophene)

Asit Patra, Yair H. Wijsboom, Sanjio S. Zade, Mao Li, Yana Sheynin, Gregory Leitus and Michael Bendikov

J. Am. Chem. Soc., 2008, 130, 6734
DOI: 10.1021/ja8018675

Why Do Some Alkoxybromothiophenes Spontaneously Polymerize?

Pawel Wagner, Kenneth W. Jolley and David L. Officer

Australian Journal of Chemistry, 2011, 64, 335
DOI: 10.1071/CH10413

Synthesis and Properties of Poly(3,4-Ethylenedioxythiophene) via Solid-State Polymerization

Shu Ai Chen, Jing Kun Xu, Dan Hua Zhu and Xue Min Duan

AMR, 2011, 306-307, 261
DOI: 10.4028/www.scientific.net/AMR.306-307.261

Structure and properties of solid-state synthesized poly(3,4-propylenedioxythiophene)/nano-ZnO composite

Ahmat Ali, Ruxangul Jamal, Weiwei shao, Adalet Rahman, Yakupjan Osman and Tursun Abdiryim

Progress in Natural Science: Materials International, 2013, 23, 524
DOI: 10.1016/j.pnsc.2013.11.002

Controlling Rigidity and Planarity in Conjugated Polymers: Poly(3,4‐ethylenedithioselenophene)

Yair H. Wijsboom, Asit Patra, Sanjio S. Zade, Yana Sheynin, Mao Li, Linda J. W. Shimon and Michael Bendikov

Angew Chem Int Ed, 2009, 48, 5443
DOI: 10.1002/anie.200901231

A 2D perchlorinated sp2-carbon framework

Cheng-Hao Liu, Yoko Sakai-Otsuka, Paul Richardson, Muhammad Rizwan Niazi, Ehsan Hamzehpoor, Thaksen Jadhav, Akaela Michels-Gualteri, Yuan Fang, Muralee Murugesu and Dmytro F. Perepichka

Cell Reports Physical Science, 2022, 3, 100858
DOI: 10.1016/j.xcrp.2022.100858

Method of Preparation of Soluble PEDOT: Self‐Polymerization of EDOT without Oxidant at Room Temperature

Elena Tomšík, Iryna Ivanko, Jan Svoboda, Ivana Šeděnková, Alexander Zhigunov, Jiřina Hromádková, Jiří Pánek, Miroslava Lukešová, Nadiia Velychkivska and Larysa Janisová

Macro Chemistry & Physics, 2020, 221
DOI: 10.1002/macp.202000219

Tuning the Band Gap of Low-Band-Gap Polyselenophenes and Polythiophenes: The Effect of the Heteroatom

Asit Patra, Yair H. Wijsboom, Gregory Leitus and Michael Bendikov

Chem. Mater., 2011, 23, 896
DOI: 10.1021/cm102395v

An Aqueous Conducting Redox‐Polymer‐Based Proton Battery that Can Withstand Rapid Constant‐Voltage Charging and Sub‐Zero Temperatures

Christian Strietzel, Mia Sterby, Hao Huang, Maria Strømme, Rikard Emanuelsson and Martin Sjödin

Angew Chem Int Ed, 2020, 59, 9631
DOI: 10.1002/anie.202001191

On Dimensionality of Halogen‐Bonded Thiophene Solid‐State Assemblies

Anne‐Lise Barrès, Magali Allain, Pierre Frère and Patrick Batail

Israel Journal of Chemistry, 2014, 54, 689
DOI: 10.1002/ijch.201400068

Synthesis of functionalizable derivatives of 3,4‐ethylenedioxythiophene and their solid‐state polymerizations

Narut Gulprasertrat, Jirasak Chapromma, Thammarat Aree and Yongsak Sritana‐anant

J of Applied Polymer Sci, 2015, 132
DOI: 10.1002/app.42233

Controlling Rigidity and Planarity in Conjugated Polymers: Poly(3,4‐ethylenedithioselenophene)

Yair H. Wijsboom, Asit Patra, Sanjio S. Zade, Yana Sheynin, Mao Li, Linda J. W. Shimon and Michael Bendikov

Angewandte Chemie, 2009, 121, 5551
DOI: 10.1002/ange.200901231

UV-irradiation polymerization of bis-EDOT methane derivatives and their application for Br2 detection

Junning Qian, Zhaoxiang Li, Ni Huang, Qingyi Lu and Jiangbin Xia

Polymer, 2021, 226, 123808
DOI: 10.1016/j.polymer.2021.123808

Methodologies for the synthesis of 3,4-ethylenedithiothiophene (EDTT) and its derivatives for use as semiconductor materials

Mustafa A-jabbar Al-Jumaili and Mohammed Adnan Abid

Tetrahedron Letters, 2023, 124, 154588
DOI: 10.1016/j.tetlet.2023.154588

Solid-State Polymerization of 2,5-Dibromothiophene Derivatives and Properties of Corresponding Conducting Polymers

Shu Ai Chen, Jing Kun Xu, Bao Yang Lu, Xue Min Duan and Fang Fang Kong

AMR, 2011, 239-242, 924
DOI: 10.4028/www.scientific.net/AMR.239-242.924

Solid state synthesis of poly(3,4-ethylenedioxythiophene) as counter electrode for dye-sensitized solar cell

Ling Chen, Jingpeng Jin, Xin Shu and Jiangbin Xia

Journal of Power Sources, 2014, 248, 1234
DOI: 10.1016/j.jpowsour.2013.09.139

Poly[3,4-(ethylenedithio)thiophene]: High specific capacity cathode active material for lithium rechargeable batteries

Jing Tang, Zhi-Ping Song, Ning Shan, Li-Zhi Zhan, Jing-Yu Zhang, Hui Zhan, Yun-Hong Zhou and Cai-Mao Zhan

Journal of Power Sources, 2008, 185, 1434
DOI: 10.1016/j.jpowsour.2008.07.079

Exploring functionalized polythiophene derivatives based on thiophene-linker-thiophene platform, analysis of prototype monomer crystal for C Br/C H bulk polycondensation and its application for acid detection

Kang Jiang, Xinyi Cai, Xinghai Liu and Jiangbin Xia

Polymer, 2019, 168, 70
DOI: 10.1016/j.polymer.2019.02.003

Preparation and characterization of aqueous dispersions of poly(3,4‐ethylenedithiathiophene‐co‐3,4‐ethylenedioxythiophene)/ poly(styrene sulfonate) and their conducting films

Shuai Chen, Baoyang Lu, Jingkun Xu, Leiqiang Qin, Zhipeng Wang and Xuemin Duan

J of Applied Polymer Sci, 2013, 129, 1717
DOI: 10.1002/app.38571

Postchemistry of Organic Microrods: Thermopolymerization in Aqueous Solution

Jinchong Xiao, Damar Yoga Kusuma, Yuechao Wu, Freddy Boey, Hua Zhang, Pooi See Lee and Qichun Zhang

Chemistry An Asian Journal, 2011, 6, 801
DOI: 10.1002/asia.201000684

Synthesis of Trithienylenevinylenes Bearing Dithiocarbonate Groups and Their Dithiophene−Tetrathiafulvalene Derivatives

Xin Chen, Norma R. de Tacconi and Ronald L. Elsenbaumer

J. Org. Chem., 2009, 74, 9188
DOI: 10.1021/jo901574v

Electrodeposition Mechanisms and Electrochemical Behavior of Poly(3,4-ethylenedithiathiophene)

H. Randriamahazaka, G. Sini and F. Tran Van

J. Phys. Chem. C, 2007, 111, 4553
DOI: 10.1021/jp068525m

Porous Counter Electrode for Dye-Sensitized Solar Cell by Simple Hydrothermal Method

Shahzad Ahmad Khan, Ligui Li, Dengke Zhao and Shaowei Chen

Polym. Sci. Ser. B, 2019, 61, 846
DOI: 10.1134/S1560090420010054

Metal Free Conducting PEDOS, PEDOT, and Their Analogues via an Unusual Bromine-Catalyzed Polymerization

Asit Patra, Vikash Agrawal, Ranoo Bhargav, Shahjad, Dinesh Bhardwaj, Suresh Chand, Yana Sheynin and Michael Bendikov

Macromolecules, 2015, 48, 8760
DOI: 10.1021/acs.macromol.5b01777

Structure and properties of solid-state synthesized poly(3′,4′-ethylenedioxy-2,2′:5′,2″-terthiophene)

Tursun Abdiryim, Ruxangul Jamal, Chunbao Zhao, Tunsagul Awut and Ismayil Nurulla

Synthetic Metals, 2010, 160, 325
DOI: 10.1016/j.synthmet.2009.10.033

Poly(3,4-ethylenediselena)thiopheneThe Selenium Equivalent of PEDOT

Hao Pang, Peter J. Skabara, Sergey Gordeyev, Joseph J. W. McDouall, Simon J. Coles and Michael B. Hursthouse

Chem. Mater., 2007, 19, 301
DOI: 10.1021/cm062242p

Facile synthesis of poly(3,4-ethylenedioxythiophene) by acid-assisted polycondensation of 5-bromo-2,3-dihydro-thieno[3,4-b][1,4]dioxine

Yinghui Yin, Zhaoxiang Li, Jingpeng Jin, Chuong Tusy and Jiangbin Xia

Synthetic Metals, 2013, 175, 97
DOI: 10.1016/j.synthmet.2013.05.001

Thiophene α-Chain-End-Functionalized Oligo(2-methyl-2-oxazoline) as Precursor Amphiphilic Macromonomer for Grafted Conjugated Oligomers/Polymers and as a Multifunctional Material with Relevant Properties for Biomedical Applications

Anca-Dana Bendrea, Luminita Cianga, Gabriela-Liliana Ailiesei, Demet Göen Colak, Irina Popescu and Ioan Cianga

IJMS, 2022, 23, 7495
DOI: 10.3390/ijms23147495