Issue 20, 2020

A two-dimensional Ru@MXene catalyst for highly selective ambient electrocatalytic nitrogen reduction

Abstract

Compared with the traditional Haber–Bosch process, electrochemical ammonia synthesis has attracted much attention owing to its low energy consumption, low pollution potential, and sustainability. However, owing to the influence of high overpotential and low selectivity, the nitrogen reduction reaction (NRR) process was of limited applicability in industry. Here, we report a high-performance Ru@Ti3C2 MXene catalyst for an ambient electrocatalytic NRR. In a 0.1 M KOH electrolyte, the NH3 yield of the Ru@MXene catalyst reached 2.3 μmol h−1 cm−2, furthermore, at −0.4 V (vs. RHE) the Faraday efficiency was 13.13%.

Graphical abstract: A two-dimensional Ru@MXene catalyst for highly selective ambient electrocatalytic nitrogen reduction

Supplementary files

Article information

Article type
Communication
Submitted
09 بهمن 1398
Accepted
05 اسفند 1398
First published
05 اسفند 1398

Nanoscale, 2020,12, 10933-10938

A two-dimensional Ru@MXene catalyst for highly selective ambient electrocatalytic nitrogen reduction

A. Liu, M. Gao, X. Ren, F. Meng, Y. Yang, Q. Yang, W. Guan, L. Gao, X. Liang and T. Ma, Nanoscale, 2020, 12, 10933 DOI: 10.1039/D0NR00788A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements