Issue 13, 2020

Degradable and recyclable bio-based thermoset epoxy resins

Abstract

The design of a degradable high-performing thermoset without using organic solvents is critical for the understanding and sustainable development of homogeneous structures with simultaneous reinforcement and toughening functions. Here, we report a novel degradable and recyclable thermoset hyperbranched epoxy resin (EFTH-n) synthesized from bio-based 2,5-furandicarboxylic acid (FDCA). EFTH-n showed excellent performance on common diglycidyl ether of bisphenol-A (DGEBA) with simultaneous improvements in the impact strength, tensile strength, flexural strength, storage modulus and elongation by up to 181.84%, 60.22%, 24.08%, 32% and 58.0%, respectively. The homogeneous microstructure of EFTH-n/DGEBA composites was systematically analyzed using in situ Raman imaging, AFM, SEM, DMA, dynamic light scattering and the positron annihilation lifetime spectroscopy, which enabled us to attribute the improvements to the synergistic effect of the crosslinking density, free volume, intermolecular cavity, hyperbranched topological structure and good compatibility between the components, which was explained by an in situ reinforcing and toughening mechanism. We concluded that EFTH-n could significantly facilitate the degradation of the cured composites under mild conditions without using organic solvents together with a FDCA recycling yield of 56.8 wt%.

Graphical abstract: Degradable and recyclable bio-based thermoset epoxy resins

Supplementary files

Article information

Article type
Paper
Submitted
21 فروردین 1399
Accepted
06 خرداد 1399
First published
07 خرداد 1399

Green Chem., 2020,22, 4187-4198

Degradable and recyclable bio-based thermoset epoxy resins

X. Chen, S. Chen, Z. Xu, J. Zhang, M. Miao and D. Zhang, Green Chem., 2020, 22, 4187 DOI: 10.1039/D0GC01250E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements