Issue 12, 2023

Two-photon microprinting of 3D emissive structures using tetraazaperylene-derived fluorophores

Abstract

The application of a new class of fluorophores based on a twisted tetraazaperylene core in the fabrication of emissive organic 3D microstructures has been investigated. The synthesis of a series of tetraazaperyleneamines and their corresponding octaazaperopyrenedioxides (OAPPDOs) with different N-benzyl substituents is reported and their formulation in a photoresist for two-photon laser printing is tested. While the direct incorporation of synthesized tetraazaperylene derivatives in a commercially available resist proved to be insufficient due to insolubility, a homogeneous formulation of the fluorophores using pentaerythritol triacrylate (PETA) as a crosslinker and phenyl-bis-(2,4,6-trimethylbenzoyl)-phosphine oxide (BAPO) as a photoinitator could be achieved. In particular, no significant inhibition of the photopolymerization and therefore, of the printing process has been detected in the presence of the fluorophore OAPPDO derivates in the optimized formulations. Various complex 3D microstructures were successfully printed and characterized using confocal fluorescence microscopy. Importantly, it is shown that tetraazaperylene fluorophores functionalized with 3,4,5-trimethoxybenzyl N-substituents were successfully embedded and distributed homogeneously in the 3D microstructures.

Graphical abstract: Two-photon microprinting of 3D emissive structures using tetraazaperylene-derived fluorophores

Supplementary files

Article information

Article type
Paper
Submitted
19 Eka. 2023
Accepted
01 Abu. 2023
First published
02 Abu. 2023

Mol. Syst. Des. Eng., 2023,8, 1470-1476

Two-photon microprinting of 3D emissive structures using tetraazaperylene-derived fluorophores

R. Eichelmann, J. Monti, L. Hsu, F. Kröger, J. Ballmann, E. Blasco and L. H. Gade, Mol. Syst. Des. Eng., 2023, 8, 1470 DOI: 10.1039/D3ME00102D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements