Issue 43, 2022

Multiplexed printed sensors for in situ monitoring in bivalve aquaculture

Abstract

Non-intrusive sensors that can be attached to marine species offer opportunities to study the impacts of environmental changes on their behaviors and well-being. This work presents a thin, flexible sensor tag to monitor the effects of dissolved oxygen and salinity on bivalve gape movement. The measurement range studied was 0.5–6 ppm for the dissolved oxygen sensor and 4–40 g kg−1 for the salinity sensor. The curvature strain sensor based on electrodeposited semiconducting fibers enabled measurements of an oyster's gape down to sub-mm displacement. The multiplexed sensors were fabricated by low-cost techniques, offering an economical and convenient platform for aquaculture studies.

Graphical abstract: Multiplexed printed sensors for in situ monitoring in bivalve aquaculture

Supplementary files

Article information

Article type
Paper
Submitted
10 Abu. 2022
Accepted
18 Urr. 2022
First published
18 Urr. 2022

Nanoscale, 2022,14, 16110-16119

Author version available

Multiplexed printed sensors for in situ monitoring in bivalve aquaculture

S. Wu, N. Phongphaew, Y. Zhai, L. Yao, H. Hsu, A. Shiller, J. D. Azoulay and T. N. Ng, Nanoscale, 2022, 14, 16110 DOI: 10.1039/D2NR04382C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements