Soft glassy materials with tunable extensibility

Samya Sen, Rubens R. Fernandes and Randy H. Ewoldt

Soft Matter, 2024, 20, 212
DOI: 10.1039/D3SM01150J

Thermoelectric nanowires for dense 3D printed architectures

Danwei Zhang, Jayanthi Ramiah, Mehmet Cagirici, Kivanc Saglik, Samantha Faye Duran Solco, Jing Cao, Jianwei Xu and Ady Suwardi

Mater. Horiz., 2024, 11, 847
DOI: 10.1039/D3MH01646C

From rheological concepts to additive manufacturing assessment of hydrogel-based materials for advanced bioprinting applications

M. Itxaso Calafel, Miryam Criado-Gonzalez, Robert Aguirresarobe, Mercedes Fernández and Carmen Mijangos

Mater. Adv., 2025, 6, 4566
DOI: 10.1039/D5MA00019J

Designing yield stress fluids for advanced materials processing using derivatives of pH-responsive branched co-polymer surfactants

Emma L. Jones, Zhidong Luo, Rishav Agrawal, Sean Flynn, Megan Carr, Will Sharratt and Esther García-Tuñón

Soft Matter, 2025, 21, 4822
DOI: 10.1039/D4SM01473A

Microstructure and elasticity of dilute gels of colloidal discoids

Peng-Kai Kao, Michael J. Solomon and Mahesh Ganesan

Soft Matter, 2022, 18, 1350
DOI: 10.1039/D1SM01605A

The elastic response of graphene oxide gels as a crumpling phenomenon

Sebastian Barwich and Matthias E. Möbius

Soft Matter, 2022, 18, 8223
DOI: 10.1039/D2SM00918H

Interplay between yielding, ‘recovery’, and strength of yield stress fluids for direct ink writing: new insights from oscillatory rheology

Rishav Agrawal and Esther García-Tuñón

Soft Matter, 2024, 20, 7429
DOI: 10.1039/D4SM00758A

Direct ink writing advances in multi-material structures for a sustainable future

Victoria G. Rocha, Eduardo Saiz, Iuliia S. Tirichenko and Esther García-Tuñón

J. Mater. Chem. A, 2020, 8, 15646
DOI: 10.1039/D0TA04181E

Tailored growth of graphene oxide liquid crystals with controlled polymer crystallization in GO-polymer composites

Soh Jin Mun, Yul Hui Shim, Geon Woong Kim, Sung Hwan Koo, Hyungju Ahn, Tae Joo Shin, Sang Ouk Kim and So Youn Kim

Nanoscale, 2021, 13, 2720
DOI: 10.1039/D0NR07858A

Photocurable cellulose nanofibers and their copolymers with polyacrylamide as microgels to support 3D cell cultivation

Shujun Liang, Qingbo Wang, Chunlin Xu, Jessica M. Rosenholm and Xiaoju Wang

Nanoscale, 2025, 17, 14394
DOI: 10.1039/D5NR00583C

Fractional viscoelastic models for power-law materials

A. Bonfanti, J. L. Kaplan, G. Charras and A. Kabla

Soft Matter, 2020, 16, 6002
DOI: 10.1039/D0SM00354A

Evaporation-driven colloidal cluster assembly using droplets on superhydrophobic fractal-like structures

Carola Seyfert, Erwin J. W. Berenschot, Niels R. Tas, Arturo Susarrey-Arce and Alvaro Marin

Soft Matter, 2021, 17, 506
DOI: 10.1039/D0SM01346C

Dityrosine-inspired photocrosslinking technique for 3D printing of silk fibroin-based composite hydrogel scaffolds

Yi Huang, Guangdong Sun, Lingling Lyu, Yongqiang Li, Dapeng Li, Qinguo Fan, Juming Yao and Jianzhong Shao

Soft Matter, 2022, 18, 3705
DOI: 10.1039/D1SM01817E

Additive manufacturing of polyaniline blends for lightweight structures with tunable conductivity

Brandon T. DiTullio, Xiao Kuang, Anna M. Österholm, Augustus W. Lang, Patrick J. Kinlen, Natalie Stingelin, H. Jerry Qi and John R. Reynolds

J. Mater. Chem. C, 2023, 11, 4404
DOI: 10.1039/D2TC04183A

Rheological, electrochemical, and microstructural properties of graphene oxides as flowable electrodes for energy storage applications

André Pincot, Jeffrey Chin, Ryan Murphy, F. John Burpo, Caspar Yi, Edward Chen, H. Daniel Bahaghighat, Benjamin Thompson, Simuck F. Yuk, Gareth H. McKinley, Enoch A. Nagelli and Matthew Armstrong

RSC Adv., 2025, 15, 9190
DOI: 10.1039/D4RA08308C

Direct ink writing of energy materials

S. Tagliaferri, A. Panagiotopoulos and C. Mattevi

Mater. Adv., 2021, 2, 540
DOI: 10.1039/D0MA00753F

Clog-Free, Low-Cost, and Uniform Electrode Inks for 3D Printed Lithium-Ion Batteries

Shengqi Ao, Zhansheng Guo, Yicheng Song, Daining Fang and Yinhua Bao

ACS Appl. Energy Mater., 2022, 5, 6970
DOI: 10.1021/acsaem.2c00594

On the selection of rheological tests for the prediction of 3D printability

Ying Liu, Matthew Hildner, Omkar Roy, William A. Van den Bogert, James Lorenz, Maude Desroches, Kurt Koppi, Albert Shih and Ronald G. Larson

Journal of Rheology, 2023, 67, 791
DOI: 10.1122/8.0000612

3D-Printed, Dual Crosslinked and Sterile Aerogel Scaffolds for Bone Tissue Engineering

Ana Iglesias-Mejuto and Carlos A. García-González

Polymers, 2022, 14, 1211
DOI: 10.3390/polym14061211

Predicting Colloidal Ink 3D Printing Behavior Using Simple Piecewise Power Law Constitutive Model

M. Naimul Hoque, Adolofo Cazares and Gordon F. Christopher

J. of Materi Eng and Perform, 2025, 34, 1301
DOI: 10.1007/s11665-023-09116-5

Machine learning-enabled feature classification of evaporation-driven multi-scale 3D printing

Samannoy Ghosh, Marshall V Johnson, Rajan Neupane, James Hardin, John Daniel Berrigan, Surya R Kalidindi and Yong Lin Kong

Flex. Print. Electron., 2022, 7, 014011
DOI: 10.1088/2058-8585/ac518a

Aqueous Inks of Pristine Graphene for 3D Printed Microsupercapacitors with High Capacitance

Stefano Tagliaferri, Goli Nagaraju, Apostolos Panagiotopoulos, Mauro Och, Gang Cheng, Francesco Iacoviello and Cecilia Mattevi

ACS Nano, 2021, 15, 15342
DOI: 10.1021/acsnano.1c06535

Rheology guiding the design and printability of aqueous colloidal composites for additive manufacturing

Ren H. Bean, Daniel A. Rau, Christopher B. Williams and Timothy E. Long

Vinyl Additive Technology, 2023, 29, 607
DOI: 10.1002/vnl.22010

Hierarchical diffusion pathways into VOC adsorption films by direct ink writing and ammonium carbonate treatment

Qiwei Chen, Zhuo Chen, Yan Wang, Enze Tian and Jinhan Mo

Chemical Engineering Journal, 2023, 471, 144560
DOI: 10.1016/j.cej.2023.144560

Nanostructure and anisotropy of 3D printed lyotropic liquid crystals studied by scattering and birefringence imaging

Adrian Rodriguez-Palomo, Viviane Lutz-Bueno, Manuel Guizar-Sicairos, Roland Kádár, Martin Andersson and Marianne Liebi

Additive Manufacturing, 2021, 47, 102289
DOI: 10.1016/j.addma.2021.102289

Novel Sol-Gel Inks for the Direct Writing of SiO2-Based Bioactive Glass Scaffolds for Tissue Engineering Applications

Aylin M. Deliormanlı

Silicon, 2025, 17, 775
DOI: 10.1007/s12633-025-03224-8

Direct ink writing of aerogels: Fundamentals, strategies, applications, and perspectives

Jianming Yang, Jialu Lu, Dongxiao Han, Bin Zhou and Ai Du

Progress in Materials Science, 2025, 152, 101462
DOI: 10.1016/j.pmatsci.2025.101462

A rheology roadmap for evaluating the printability of material extrusion inks

Daniel A. Rau, Michael J. Bortner and Christopher B. Williams

Additive Manufacturing, 2023, 75, 103745
DOI: 10.1016/j.addma.2023.103745

Nanocellulose‐Based Ink for Vertically 3D Printing Micro‐Architectures with High‐Resolution

Ge Shi, Miao Tian, Yutong Chen, Linxin Zhong, Wenli Zhang, Zehong Chen, Shirong Sun, Ruidong Xia, Emmanuel I. Iwuoha and Xinwen Peng

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202311060

3D printed supercapacitor using porous carbon derived from packaging waste

Mohanad Idrees, Syed Ahmed, Z. Mohammed, Naga S. Korivi and Vijaya Rangari

Additive Manufacturing, 2020, 36, 101525
DOI: 10.1016/j.addma.2020.101525

Thixotropic spectra and Ashby-style charts for thixotropy

Samya Sen and Randy H. Ewoldt

Journal of Rheology, 2022, 66, 1041
DOI: 10.1122/8.0000446

A rheological method to predict printability of high solids content inks via ultraviolet-assisted material extrusion

John P. Reynolds, Daniel A. Rau, Christopher B. Williams and Michael J. Bortner

Additive Manufacturing, 2023, 75, 103753
DOI: 10.1016/j.addma.2023.103753

From whey robocasting to custom 3D porous carbons

Raúl Llamas-Unzueta, J. Angel Menéndez, Marta Suárez, Adolfo Fernández and Miguel A. Montes-Morán

Additive Manufacturing, 2022, 59, 103083
DOI: 10.1016/j.addma.2022.103083

Direct Ink Writing of Carbon-Doped Polymeric Composite Ink: A Review on Its Requirements and Applications

Ratnesh Raj and Amit Rai Dixit

3D Printing and Additive Manufacturing, 2023, 10, 828
DOI: 10.1089/3dp.2021.0209

Additive Manufacturing of Shape Memory Thermoset Composites with Directional Thermal Conductivity

Yinglun Hong, Itxaso Azcune, Alaitz Rekondo, Tianhui Jiang, Shitong Zhou, Tristan Lowe and Eduardo Saiz

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202311193

Cytomembrane-Inspired MXene Ink with Amphiphilic Surfactant for 3D Printed Microsupercapacitors

Ge Shi, Yuxuan Zhu, Munkhbayar Batmunkh, Malaika Ingram, Yongfa Huang, Zehong Chen, Yujia Wei, Linxin Zhong, Xinwen Peng and Yu Lin Zhong

ACS Nano, 2022, 16, 14723
DOI: 10.1021/acsnano.2c05445

3D Food Printing: Principles of Obtaining Digitally-Designed Nourishment

Rodica-Anita Varvara, Katalin Szabo and Dan Cristian Vodnar

Nutrients, 2021, 13, 3617
DOI: 10.3390/nu13103617

Development of hybrid polyvinylpyrrolidone/carboxymethyl cellulose/collagen incorporated oregano scaffolds via direct ink write printing for potential wound healing applications

Syed Muneeb Haider Gillani, Awab Mughal, Raja Aqib Akmal Khan, Muhammad Haseeb Nawaz, Zohaib Razzaq, Muhammad Sameet Ismat, Rabia Hussain, Abdul Wadood, Sheraz Ahmed, Badar Minhas, Mohamed Abbas, Thafasalijyas Vayalpurayil and Muhammad Atiq Ur Rehman

International Journal of Biological Macromolecules, 2024, 278, 134528
DOI: 10.1016/j.ijbiomac.2024.134528

Improved Direct Ink Writing of Liquid Metal Foams via Liquid Additives

Febby Krisnadi, Tushar Sakorikar, Man Hou Vong and Michael D. Dickey

Adv Elect Materials, 2025
DOI: 10.1002/aelm.202500009

Rheology of Conductive High Reactivity Carbonaceous Material (HRCM)-Based Ink Suspensions: Dependence on Concentration and Temperature

Claudia Dessi, Nicola Melis, Francesco Desogus, Luca Pilia, Roberto Ricciu and Massimiliano Grosso

Nanomaterials, 2022, 13, 21
DOI: 10.3390/nano13010021

Printability criterion and filler characteristics model for material extrusion additive manufacturing

James J. Griebler, Alexander S. Tappan, Simon A. Rogers, Anne M Grillet and Jessica W. Kopatz

Additive Manufacturing, 2025, 99, 104651
DOI: 10.1016/j.addma.2025.104651

Orientation of macro/microscopic structures in anisotropic materials through 3D printing: Rheological behavior, processing, and properties

Xinyu Guo, Huan Jiao, Xuyang Guo, Chengyang Du, Dongsheng Shi, Wenjuan Wu, Yongcan Jin and Bo Jiang

Composites Part A: Applied Science and Manufacturing, 2025, 192, 108767
DOI: 10.1016/j.compositesa.2025.108767

Recent advances and future challenges in printed batteries

C.M. Costa, R. Gonçalves and S. Lanceros-Méndez

Energy Storage Materials, 2020, 28, 216
DOI: 10.1016/j.ensm.2020.03.012

Enhancing the Mechanical Properties of 3D-Printed Waterborne Polyurethane-Urea and Cellulose Nanocrystal Scaffolds through Crosslinking

Julen Vadillo, Izaskun Larraza, Tamara Calvo-Correas, Loli Martin, Christophe Derail and Arantxa Eceiza

Polymers, 2022, 14, 4999
DOI: 10.3390/polym14224999

Ink formulation in direct ink writing of ceramics: A meta-analysis

Zhuoqi Lucas Li, Shitong Zhou, Eduardo Saiz and Rohit Malik

Journal of the European Ceramic Society, 2024, 44, 6777
DOI: 10.1016/j.jeurceramsoc.2024.05.014

Synthesis and rheological characterization of a novel shear thinning levan gellan hydrogel

Revathy Nair and Anirban Roy Choudhury

International Journal of Biological Macromolecules, 2020, 159, 922
DOI: 10.1016/j.ijbiomac.2020.05.119

Coaxial Ceramic Direct Ink Writing on Heterogenous and Rough Surfaces: Investigation of Core–Shell Interactions

Domenic Cipollone, Javier A. Mena, Katarzyna Sabolsky, Edward M. Sabolsky and Konstantinos A. Sierros

ACS Appl. Mater. Interfaces, 2022, 14, 24897
DOI: 10.1021/acsami.2c03250

In-situ optimization of thermoset composite additive manufacturing via deep learning and computer vision

William Jordan Wright, Joshua Darville, Nurcin Celik, Hilmar Koerner and Emrah Celik

Additive Manufacturing, 2022, 58, 102985
DOI: 10.1016/j.addma.2022.102985

Strategies for enhancing capacity and rate performance of two-dimensional material-based supercapacitors

Huayan Liu, Yifei Chen, Mengzhao Yang and Jiajun Gu

Acta Physico-Chimica Sinica, 2025, 41, 100063
DOI: 10.1016/j.actphy.2025.100063

Comprehensive review on various additive manufacturing techniques and its implementation in electronic devices

Nidhin Divakaran, Jyoti Prakash Das, Ajay Kumar P V, Smita Mohanty, Ananthakumar Ramadoss and Sanjay Kumar Nayak

Journal of Manufacturing Systems, 2022, 62, 477
DOI: 10.1016/j.jmsy.2022.01.002

3D Printing of chewable oral tablets using drug nanosuspension inks: an experimental and machine learning study

Hang Truong, Nikki Rodriguez, Alperen Abaci, Gulenay Guner, Joshua Young, Ecevit A. Bilgili and Murat Guvendiren

Virtual and Physical Prototyping, 2025, 20
DOI: 10.1080/17452759.2025.2517811

Robocasting of advanced ceramics: ink optimization and protocol to predict the printing parameters - A review

Soukaina Lamnini, Hamada Elsayed, Yazid Lakhdar, Francesco Baino, Federico Smeacetto and Enrico Bernardo

Heliyon, 2022, 8, e10651
DOI: 10.1016/j.heliyon.2022.e10651

Viscoelastic behavior, gelation properties and structural characterization of Deccan hemp seed (Hibiscus cannabinus) protein: Influence of protein and ionic concentrations, pH, and temperature

Dibya Ranjan Dash, Sushil Kumar Singh and Poonam Singha

International Journal of Biological Macromolecules, 2024, 263, 130120
DOI: 10.1016/j.ijbiomac.2024.130120

Spreading of graphene oxide suspensions droplets on smooth surfaces

J. A. Quirke and M. E. Möbius

Physics of Fluids, 2024, 36
DOI: 10.1063/5.0231547

3D-printed ceramic membranes: Fabrication and hydrogen permeation performance

A. Bartoletti, E. Mercadelli, V. Saraceni, A. Sangiorgi, A. Gondolini, C. Melandri, P. Pinasco, P. Gramazio, A. Fasolini, J. De Maron, F. Basile and A. Sanson

Journal of Membrane Science, 2025, 733, 124311
DOI: 10.1016/j.memsci.2025.124311

Additive Manufacturing of Zirconia-Based Pastes for Dental Prosthesis Via Robocasting Method

Konstantinos Dimitriadis, Diana Baciu, Savvas Koltsakidis, Dimitrios Tzetzis, Eleni Garmpi, Eleni Roussi, Ioanna Kitsou, Athena Tsetsekou and Constantina-Dia Andreouli

J. of Materi Eng and Perform, 2025, 34, 4735
DOI: 10.1007/s11665-024-09465-9

Rheology and printability: A survey of critical relationships for direct ink write materials design

Daniel A. Rau, Christopher B. Williams and Michael J. Bortner

Progress in Materials Science, 2023, 140, 101188
DOI: 10.1016/j.pmatsci.2023.101188

Development of a Miniaturized Capillary Rheometer for High Shear Rate Rheology of Dense Suspensions

John P. Reynolds, Ray S. Dietzenbach, Sara G. Watson, Kate J. Hornberger, Michael Coco, Christopher B. Williams and Michael J. Bortner

Adv Materials Technologies, 2025
DOI: 10.1002/admt.202500583

Rheological insights into 3D printing of drug products: Drug nanocrystal-poloxamer gels for semisolid extrusion

Atte Junnila, Laurence Mortier, Alba Arbiol, Elina Harju, Teemu Tomberg, Jouni Hirvonen, Tapani Viitala, Anssi-Pekka Karttunen and Leena Peltonen

International Journal of Pharmaceutics, 2024, 655, 124070
DOI: 10.1016/j.ijpharm.2024.124070

Oozing control and retraction in colloid 3D printing: parametric analysis

Mohammed Al-Ali and Yara Almubarak

Prog Addit Manuf, 2025, 10, 5217
DOI: 10.1007/s40964-024-00898-1

Lignin‐Based Materials for Additive Manufacturing: Chemistry, Processing, Structures, Properties, and Applications

Bo Jiang, Huan Jiao, Xinyu Guo, Gegu Chen, Jiaqi Guo, Wenjuan Wu, Yongcan Jin, Guozhong Cao and Zhiqiang Liang

Advanced Science, 2023, 10
DOI: 10.1002/advs.202206055

Buoyant miscible viscoplastic injections

M. Faramarzi, S. Akbari and S. M. Taghavi

Phys. Rev. Fluids, 2024, 9
DOI: 10.1103/PhysRevFluids.9.073301

3D-Printed MIL-101(Cr)-Monoliths for butanol and cyclohexane removal: insights into rheological behavior and adsorption capacity

Alan A. Rico-Barragán, Manuel Alejandro Ávila-Lopéz, José Bonilla Cruz, Tania E. Lara-Ceniceros, Cintia Karina Rojas Mayorga, I.A. Aguayo-Villarreal, Ilich A. Ibarra, Minoosh Lalinia, Jaime Moreno-Pérez and Nancy E. Dávila-Guzmán

Materials Science and Engineering: B, 2025, 320, 118449
DOI: 10.1016/j.mseb.2025.118449

Ultrafast high-temperature sintering of polymer-derived ceramic thick film sensors

Yanzhang Fu, Lida Xu, Fuxin Zhao, Chenhe Shao, Yuelong Li, Lanlan Li, Songyue Chen, Qinnan Chen, Lingyun Wang, Daoheng Sun and Chao Wu

Ceramics International, 2024, 50, 36908
DOI: 10.1016/j.ceramint.2024.07.078

Design of a Waterborne Polyurethane–Urea Ink for Direct Ink Writing 3D Printing

Julen Vadillo, Izaskun Larraza, Tamara Calvo-Correas, Nagore Gabilondo, Christophe Derail and Arantxa Eceiza

Materials, 2021, 14, 3287
DOI: 10.3390/ma14123287

Nanomaterials-based, transducer-side active-electronic-free, self-powered, and wireless wearable E-skin for augmented interactive human-robots

Shingirirai Chakoma, Jerome Rajendran, Xiaochang Pei, Anita Ghandehari, Jorge Alfonso Tavares Negrete and Rahim Esfandyarpour

Nano Energy, 2025, 142, 111199
DOI: 10.1016/j.nanoen.2025.111199

A novel experimental approach to quantitatively evaluate the printability of inks in 3D printing using two criteria

Haohao Ji, Jin Zhao, Jie Chen, Shunzo Shimai, Jian Zhang, Yu Liu, Dianzi Liu and Shiwei Wang

Additive Manufacturing, 2022, 55, 102846
DOI: 10.1016/j.addma.2022.102846

Quantitative insights into rheology of self-crosslinking dialdehyde carboxymethyl cellulose/collagen solution: A comprehensive experimental and modelling investigation

Zhenhua Tian, Jingxuan He, Ying Wang, Wenjie Zhao and Lian Duan

Mechanics of Materials, 2022, 170, 104356
DOI: 10.1016/j.mechmat.2022.104356

3D-Printed Mucoadhesive Collagen Scaffolds as a Local Tetrahydrocurcumin Delivery System

Mireia Andonegi, Teresa Carranza, Alaitz Etxabide, Koro de la Caba and Pedro Guerrero

Pharmaceutics, 2021, 13, 1697
DOI: 10.3390/pharmaceutics13101697

Soft Ferrofluid Actuator Based on 3D-Printed Scaffold Removal

Soheila Shabaniverki, Shengwen Xie, Juan Ren and Jaime J. Juárez

3D Printing and Additive Manufacturing, 2021, 8, 126
DOI: 10.1089/3dp.2020.0012

Programmable multistability for 3D printed reinforced multifunctional composites with reversible shape change

Shanthini Puthanveetil, Wing Chung Liu, Katherine S. Riley, Andres F. Arrieta and Hortense Le Ferrand

Composites Science and Technology, 2022, 217, 109097
DOI: 10.1016/j.compscitech.2021.109097

Viscoplastic lines: printing a single filament of yield stress material on a surface

Jesse van der Kolk, Daniël Tieman and Maziyar Jalaal

J. Fluid Mech., 2023, 958
DOI: 10.1017/jfm.2023.118

Direct Ink Writing for Electrochemical Device Fabrication: A Review of 3D-Printed Electrodes and Ink Rheology

Nickolas D. Polychronopoulos and Angeliki Brouzgou

Catalysts, 2024, 14, 110
DOI: 10.3390/catal14020110

Chitin nanocrystal based aqueous inks for 3D printing via direct ink writing

Shaohua Gu, Hengying Ji, Kai Liang and Yali Ji

Journal of Elastomers & Plastics, 2022, 54, 922
DOI: 10.1177/00952443221102589

Extrusion-based 3D printing of food biopolymers: A highlight on the important rheological parameters to reach printability

Théo Claude Roland Outrequin, Chaiwut Gamonpilas, Wanwipa Siriwatwechakul and Paiboon Sreearunothai

Journal of Food Engineering, 2023, 342, 111371
DOI: 10.1016/j.jfoodeng.2022.111371

Optimization of mechanical properties of robocast alumina parts through control of the paste rheology

Mathilde Maillard, Jérôme Chevalier, Laurent Gremillard, Guilhem P. Baeza, Edwin-Joffrey Courtial, Sarah Marion and Vincent Garnier

Journal of the European Ceramic Society, 2023, 43, 2805
DOI: 10.1016/j.jeurceramsoc.2022.12.008

Linking thermoset ink rheology to the stability of 3D-printed structures

Stian K. Romberg, Mohammad A. Islam, Christopher J. Hershey, Michael DeVinney, Chad E. Duty, Vlastimil Kunc and Brett G. Compton

Additive Manufacturing, 2021, 37, 101621
DOI: 10.1016/j.addma.2020.101621

Confined Brownian suspensions: Equilibrium diffusion, thermodynamics, and rheology

Alp M. Sunol and Roseanna N. Zia

Journal of Rheology, 2023, 67, 433
DOI: 10.1122/8.0000520

Multi-axis material extrusion: Conformal deposition of a high-performance cyanate ester

Daniel A. Rau, Supreet S. Thale, Joseph R. Kubalak, Ben Woods and Christopher B. Williams

Additive Manufacturing Letters, 2023, 7, 100160
DOI: 10.1016/j.addlet.2023.100160

Brittle and ductile yielding in soft materials

Krutarth M. Kamani and Simon A. Rogers

Proc. Natl. Acad. Sci. U.S.A., 2024, 121
DOI: 10.1073/pnas.2401409121

Production and mechanical characterization of Titanium Carbide ISOL target disks fabricated by direct ink writing

Alessandro Breda, Alice Zanini, Alberto Campagnolo, Stefano Corradetti, Mattia Manzolaro, Giovanni Meneghetti, Paolo Colombo, Michele Ballan and Giorgia Franchin

Ceramics International, 2023, 49, 31666
DOI: 10.1016/j.ceramint.2023.07.121

Towards a predictive understanding of direct ink writing of graphene-based inks

Laura S. van Hazendonk, Coen F. Vonk, Wilko van Grondelle, Niels H. Vonk and Heiner Friedrich

Applied Materials Today, 2024, 36, 102014
DOI: 10.1016/j.apmt.2023.102014

Vancomycin-loaded methylcellulose aerogel scaffolds for advanced bone tissue engineering

Ana Iglesias-Mejuto, Beatriz Magariños, Tânia Ferreira-Gonçalves, Ricardo Starbird-Pérez, Carmen Álvarez-Lorenzo, Catarina Pinto Reis, Inés Ardao and Carlos A. García-González

Carbohydrate Polymers, 2024, 324, 121536
DOI: 10.1016/j.carbpol.2023.121536

Cellulose-in-cellulose 3D-printed bioaerogels for bone tissue engineering

Ana Iglesias-Mejuto, Nanthilde Malandain, Tânia Ferreira-Gonçalves, Inés Ardao, Catarina Pinto Reis, Anna Laromaine, Anna Roig and Carlos A. García-González

Cellulose, 2024, 31, 515
DOI: 10.1007/s10570-023-05601-1

Innovation in Additive Manufacturing Using Polymers: A Survey on the Technological and Material Developments

Mauricio A. Sarabia-Vallejos, Fernando E. Rodríguez-Umanzor, Carmen M. González-Henríquez and Juan Rodríguez-Hernández

Polymers, 2022, 14, 1351
DOI: 10.3390/polym14071351

Is Low Polydispersity Always Beneficial? Exploring the Impact of Size Polydispersity on the Microstructure and Rheological Properties of Graphene Oxide

Eun Ho Cho, Yul Hui Shim and So Youn Kim

ACS Appl. Mater. Interfaces, 2024
DOI: 10.1021/acsami.4c10059

Features and limitations of recent elastoviscoplastic constitutive models under Large Amplitude Oscillatory Shear (LAOS)

Rishav Agrawal, Esther García-Tuñón, Robert J. Poole and Cláudio P. Fonte

Journal of Non-Newtonian Fluid Mechanics, 2025, 338, 105407
DOI: 10.1016/j.jnnfm.2025.105407

Liquid Crystal-Mediated 3D Printing Process to Fabricate Nano-Ordered Layered Structures

Ali Rouhollah Jalili, Alexandra Satalov, Sahar Nazari, Bryan Harry Rahmat Suryanto, Jing Sun, Mohammad Bagher Ghasemian, Mohannad Mayyas, Ahmad E. Kandjani, Ylias M. Sabri, Edwin Mayes, Suresh K. Bhargava, Jun Araki, Cécile Zakri, Philippe Poulin, Dorna Esrafilzadeh and Rose Amal

ACS Appl. Mater. Interfaces, 2021, 13, 28627
DOI: 10.1021/acsami.1c05025

Porous Polymer Structures with Tunable Mechanical Properties Using a Water Emulsion Ink

Joshua Z. R. Dantzler, Sofia Gabriela Gomez, Stephanie Gonzalez, Diego Gonzalez, Alan O. Loera Martinez, Cory Marquez, Md Sahid Hassan, Saqlain Zaman, Alexis Lopez, Md Shahjahan Mahmud and Yirong Lin

Materials, 2024, 17, 1074
DOI: 10.3390/ma17051074

An approach to 3D print liquid ceramic slurries

Sharlene Tan, Muhammad Iskandar Shah bin Mohd Shafari, Chin Kiat Chan and Hortense Le Ferrand

Materials Today: Proceedings, 2022, 70, 487
DOI: 10.1016/j.matpr.2022.09.467

3D Printing of Okara Ink: The Effect of Particle Size on the Printability

Cheng Pau Lee, Masaki Takahashi, Satoshi Arai, Chi-Lik Ken Lee and Michinao Hashimoto

ACS Food Sci. Technol., 2021, 1, 2053
DOI: 10.1021/acsfoodscitech.1c00236

Investigating the rheology of 2D titanium carbide (MXene) dispersions for colloidal processing: Progress and challenges

Michael Greaves, Mana Mende, Jiacheng Wang, Wenji Yang and Suelen Barg

Journal of Materials Research, 2021, 36, 4578
DOI: 10.1557/s43578-021-00282-7

The effect of formulation composition and flow conditions on the robustness of semisolid extrusion 3D printing: a case study on poorly water-soluble itraconazole for oral dosage form production

Atte Junnila, Oskari Henriksson, Ardaneh Fatemeh, Eero Immonen, Maha F. Emam, Marianna Kemell, Nikolaos Pahimanolis, Kirsi Mikkonen, Jouni Hirvonen, Tapani Viitala, Anssi-Pekka Karttunen and Leena Peltonen

European Journal of Pharmaceutical Sciences, 2025, 107230
DOI: 10.1016/j.ejps.2025.107230

Simple Fabrication of Flexible Biosensor Arrays Using Direct Writing for Multianalyte Measurement from Human Astrocytes

James K. Nolan, Tran N.H. Nguyen, Khanh Vy H. Le, Luke E. DeLong and Hyowon Lee

SLAS Technology, 2020, 25, 33
DOI: 10.1177/2472630319888442

Fabrication of 3D-printed coiled PCL microfibrous bundles using alginate-based biocomposites for bone tissue engineering applications

Mohan Pei, Hanjun Hwangbo and GeunHyung Kim

Int. J. Extrem. Manuf., 2025, 7, 025501
DOI: 10.1088/2631-7990/ad91fa

3D‐Printed Porous Organic Cages for Gas Filtration: Fabrication and Flow Simulations

Bin Ling, Rishav Agrawal, Donglin He, Robert J. Poole, Andrew I. Cooper, Ming Liu and Esther García‐Tuñón

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202405320

Reversible Control of Rheological Properties in Microgel Composites via Nanoparticle Aggregation

Yul Hui Shim, Tae Yeon Kong and So Youn Kim

ACS Appl. Mater. Interfaces, 2025, 17, 39616
DOI: 10.1021/acsami.5c06287

Tailoring pea proteins gelling properties by high-pressure homogenization for the formulation of a model spreadable plant-based product

Giulia D'Alessio, Francesco Iervese, Luca Valbonetti, Marco Faieta, Paola Pittia and Carla Daniela Di Mattia

LWT, 2024, 207, 116627
DOI: 10.1016/j.lwt.2024.116627

Effect of SiC content on the process and properties of PDMS/SiC composites by direct ink writing

Zixu Zhao, Lida Zhu, Peihua Xu, Jinsheng Ning and Zhichao Yang

Ceramics International, 2025, 51, 5241
DOI: 10.1016/j.ceramint.2024.11.498

Tuning multi-scale pore structures in carbonaceous films via direct ink writing and sacrificial templates for efficient indoor formaldehyde removal

Zhuo Chen, Qiwei Chen, Yan Wang, Wuwei Zou, Yuan Li and Jinhan Mo

Journal of Hazardous Materials, 2025, 487, 137203
DOI: 10.1016/j.jhazmat.2025.137203

Evaluation of robocasting process in the layering of dental feldspathic porcelain in metal‐ceramic restorations

Konstantinos Dimitriadis, Eleni Roussi, Diana Baciu, Eleni Garmpi, Athena Tsetsekou and Constantina‐Dia Andreouli

Int J Applied Ceramic Tech, 2024, 21, 702
DOI: 10.1111/ijac.14590

Multimaterial extrusion 3D printing printheads

Nathan C. Brown, Daniel C. Ames and Jochen Mueller

Nat Rev Mater, 2025
DOI: 10.1038/s41578-025-00809-y

Printability Evaluation of UV-Curable Aqueous Laponite/Urethane-Based PEG Inks

Aysu Arslan, Patrice Roose, Annemie Houben, Heidi Declercq, Sandra Van Vlierberghe and Peter Dubruel

ACS Appl. Polym. Mater., 2023, 5, 2345
DOI: 10.1021/acsapm.2c02013

Modeling robocasting with smoothed particle hydrodynamics: Printing gap-spanning filaments

Bastien Dietemann, Fatih Bosna, Mylena Lorenz, Nahum Travitzky, Harald Kruggel-Emden, Torsten Kraft and Claas Bierwisch

Additive Manufacturing, 2020, 36, 101488
DOI: 10.1016/j.addma.2020.101488

Interfacial piezoelectric polarization locking in printable Ti3C2Tx MXene-fluoropolymer composites

Nick A. Shepelin, Peter C. Sherrell, Emmanuel N. Skountzos, Eirini Goudeli, Jizhen Zhang, Vanessa C. Lussini, Beenish Imtiaz, Ken Aldren S. Usman, Greg W. Dicinoski, Joseph G. Shapter, Joselito M. Razal and Amanda V. Ellis

Nat Commun, 2021, 12
DOI: 10.1038/s41467-021-23341-3

Revolutionizing biomedical engineering: Extrusion-based hydroxyapatite printing for scaffold construction: A review

K.D. Ahalya and Balasubramanian Kandasubramanian

Hybrid Advances, 2024, 6, 100227
DOI: 10.1016/j.hybadv.2024.100227

Rheological Insight into the 3D Printability of Carboxymethyl Cellulose-Based Hydrogels

Itziar Insua, Oliver Etzold, Itxaso Calafel, Robert Aguirresarobe, Marcelo Calderón and Mercedes Fernández

Gels, 2025, 11, 259
DOI: 10.3390/gels11040259

Design of bone scaffolds with calcium phosphate and its derivatives by 3D printing: A review

Seyedeh Farnaz Darghiasi, Ashkan Farazin and Hanieh Sadat Ghazali

Journal of the Mechanical Behavior of Biomedical Materials, 2024, 151, 106391
DOI: 10.1016/j.jmbbm.2024.106391

Superacid assisted high-throughput production and solution-processing of pristine two-dimensional materials

Qixuan Deng, Jiabin Ma, Minsu Liu, Yicong Zhou, Siyuan Ding, Ke Zhan, Yuan Zhu, Zhiyuan Xiong, Yang Su, Kuang Yu, Hui-Ming Cheng and Ling Qiu

Materials Today, 2025, 86, 228
DOI: 10.1016/j.mattod.2025.03.026

Clustering of instrumental methods to characterize the texture and the rheology of slimy okra (Abelmoschus esculentus) suspensions

Timoty Savouré, Manuel Dornier, Laurent Vachoud and Antoine Collignan

Journal of Texture Studies, 2020, 51, 426
DOI: 10.1111/jtxs.12505

Additive‐Free, Gelled Nanoinks as a 3D Printing Toolbox for Hierarchically Structured Bulk Aerogels

Matthias Rebber, Malte Trommler, Irina Lokteva, Samanehalsadat Ehteram, Andreas Schropp, Sandra König, Michael Fröba and Dorota Koziej

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202112914

Elucidating the G″ overshoot in soft materials with a yield transition via a time-resolved experimental strain decomposition

Gavin J. Donley, Piyush K. Singh, Abhishek Shetty and Simon A. Rogers

Proc. Natl. Acad. Sci. U.S.A., 2020, 117, 21945
DOI: 10.1073/pnas.2003869117

High-performance thermosets for additive manufacturing

Thamires Andrade Lima, Anh Fridman, Jaclyn McLaughlin, Clayton Francis, Anthony Clay, Ganesh Narayanan, Heedong Yoon, Mohanad Idrees, Giuseppe R. Palmese, John La Scala and Nicolas Javier Alvarez

Innov. Emerg. Technol., 2023, 10
DOI: 10.1142/S2737599423300039

The nonlinear rheology of complex yield stress foods

James J. Griebler and Simon A. Rogers

Physics of Fluids, 2022, 34
DOI: 10.1063/5.0083974

Thixotropy, antithixotropy, and viscoelasticity in hysteresis

Yilin Wang and Randy H. Ewoldt

Journal of Rheology, 2023, 67, 1199
DOI: 10.1122/8.0000620

Rheology of paste-like food inks for 3D printing: Effects of nutrient and water content

Z.Y. Bugday, A. Venkatachalam, P.D. Anderson and R.G.M. van der Sman

Current Research in Food Science, 2024, 9, 100847
DOI: 10.1016/j.crfs.2024.100847

Plant-based biomaterials as scaffolds for cellular agriculture

Woo-Ju Kim, Yoonbin Kim, Reza Ovissipour and Nitin Nitin

Future Foods, 2024, 10, 100468
DOI: 10.1016/j.fufo.2024.100468

Haematococcus pluvialis meets gellan gum: Rheological and thermal exploration of a new resource food and biomedical gel matrix

Guangming Zhang, Ping Cheng, Zhengping Wang, Jun Han and Zhiping Fan

Journal of Food Science, 2024, 89, 7831
DOI: 10.1111/1750-3841.17433

Tripolyphosphate-chitosan-pea protein interactions confers long-term stability to 3D printed high internal phase Pickering emulsions

Chani Oshadi Karandagaspitiya, Camille Keisha Mahendra, Hui-Peng Lim, Derek Kwan-Hoe Chan, Yi Shen Tey, Chui Fong Kam, Charanjit Kaur Surjit Singh, Cher Pin Song and Eng-Seng Chan

Food Chemistry, 2025, 466, 142228
DOI: 10.1016/j.foodchem.2024.142228

Methodology to determine printability criteria of highly concentrated pastes through rheological characterization

James J. Griebler, Alexander S. Tappan, Simon A. Rogers, Jessica W. Kopatz and Anne M. Grillet

Additive Manufacturing, 2024, 96, 104578
DOI: 10.1016/j.addma.2024.104578

Robocasting of ordered mesoporous silica‐based monoliths: Rheological, textural, and mechanical characterization

Emiliano S. Dal Molin, Laura M. Henning, Julian T. Müller, Glen J. Smales, Brian R. Pauw, Maged F. Bekheet, Aleksander Gurlo and Ulla Simon

Nano Select, 2023, 4, 615
DOI: 10.1002/nano.202300109

Ceramics and ceramic composites for biomedical engineering applications via Direct Ink Writing: Overall scenario, advances in the improvement of mechanical and biological properties and innovations

Vivian Inês dos Santos, Jérôme Chevalier, Márcio Celso Fredel, Bruno Henriques and Laurent Gremillard

Materials Science and Engineering: R: Reports, 2024, 161, 100841
DOI: 10.1016/j.mser.2024.100841

Multiple interval thixotropic test (miTT)—an advanced tool for the rheological characterization of emulsions and other colloidal systems

Florian J. Stadler, Shuming Cui, Saud Hashmi, Stephan Handschuh-Wang, Wenqiang Li, Shichang Wang, Zhi-Chao Yan and Guangming Zhu

Rheol Acta, 2022, 61, 229
DOI: 10.1007/s00397-021-01323-y

Mechanical and rheological effects of transglutaminase treatment on dense plant protein blends

Miek Schlangen, Marieke A. Ribberink, Somayeh Taghian Dinani, Leonard M.C. Sagis and Atze Jan van der Goot

Food Hydrocolloids, 2023, 136, 108261
DOI: 10.1016/j.foodhyd.2022.108261

Long-Term Aging of Concentrated Aqueous Graphene Oxide Suspensions Seen by Rheology and Raman Spectroscopy

Benjámin Gyarmati, Shereen Farah, Attila Farkas, György Sáfrán, Loredana Mirela Voelker-Pop and Krisztina László

Nanomaterials, 2022, 12, 916
DOI: 10.3390/nano12060916

Unifying dispersion properties of graphene oxide suspensions via interlayer spacing control: Insights for universal 2D colloid behavior

Yul Hui Shim, Eun Ho Cho and So Youn Kim

Carbon, 2023, 215, 118473
DOI: 10.1016/j.carbon.2023.118473

Microgel-Guided MXene Assembly for High-Performance, Low-Solid Content Conductive Inks

Farivash Gholamirad, Monirosadat Sadati and Nader Taheri-Qazvini

ACS Appl. Mater. Interfaces, 2025, 17, 4022
DOI: 10.1021/acsami.4c19700

A Versatile Photocrosslinkable Silicone Composite for 3D Printing Applications

Mecit Altan Alioglu, Yasar Ozer Yilmaz, Ethan Michael Gerhard, Vaibhav Pal, Deepak Gupta, Syed Hasan Askari Rizvi and Ibrahim T. Ozbolat

Adv Materials Technologies, 2024, 9
DOI: 10.1002/admt.202301858

Direct Ink Writing of Carbon‐Based Electrofluids for Soft Electrical Component Manufacturing

Niclas Hautz and Lola González‐García

Adv Materials Technologies, 2025
DOI: 10.1002/admt.202402012

3D Bioprinting of Human Adipose-Derived Stem Cells and Their Tenogenic Differentiation in Clinical-Grade Medium

Deborah Stanco, Monica Boffito, Alessia Bogni, Luca Puricelli, Josefa Barrero, Gianni Soldati and Gianluca Ciardelli

IJMS, 2020, 21, 8694
DOI: 10.3390/ijms21228694

Go with the flow: Rheological requirements for direct ink write printability

Peiran Wei, Ciera Cipriani, Chia-Min Hsieh, Krutarth Kamani, Simon Rogers and Emily Pentzer

Journal of Applied Physics, 2023, 134
DOI: 10.1063/5.0155896

Equilibrium structure and deformation response of 2D kinetoplast sheets

Alexander R. Klotz, Beatrice W. Soh and Patrick S. Doyle

Proc. Natl. Acad. Sci. U.S.A., 2020, 117, 121
DOI: 10.1073/pnas.1911088116

Dispersant- and solvent-free pastes for UV-assisted micro-extrusion of porous proton conductive membrane supports

Andrea Bartoletti, Alex Sangiorgi, Angela Gondolini, Elisa Mercadelli, Simone Casadio, Sandra García-González, Miguel Morales, Emilio Jimenez-Pique and Alessandra Sanson

Journal of the European Ceramic Society, 2023, 43, 4844
DOI: 10.1016/j.jeurceramsoc.2023.04.038

Hybrid colloidal gels with tunable elasticity formed by charge-driven assembly between spherical soft nanoparticles and discotic nanosilicates

Gelareh Rezvan, Mohsen Esmaeili, Monirosadat Sadati and Nader Taheri-Qazvini

Journal of Colloid and Interface Science, 2022, 627, 40
DOI: 10.1016/j.jcis.2022.07.039

Role of in situ added cellulose nanocrystals as rheological modulator of novel waterborne polyurethane urea for 3D-printing technology

Julen Vadillo, Izaskun Larraza, Tamara Calvo-Correas, Nagore Gabilondo, Christophe Derail and Arantxa Eceiza

Cellulose, 2021, 28, 4729
DOI: 10.1007/s10570-021-03826-6

Polymer-inorganic hybrid colloids for ultraviolet-assisted direct ink write of polymer nanocomposites

Philip J. Scott, Daniel A. Rau, Jianheng Wen, Mai Nguyen, Christopher R. Kasprzak, Christopher B. Williams and Timothy E. Long

Additive Manufacturing, 2020, 35, 101393
DOI: 10.1016/j.addma.2020.101393

Bridging Heterogeneity Dictates the Microstructure and Yielding Response of Polymer-Linked Emulsions

Daniel P. Keane, Colby J. Constantine, Matthew D. Mellor and Ryan Poling-Skutvik

Langmuir, 2023, 39, 7852
DOI: 10.1021/acs.langmuir.3c00707

Predicting Extensional Behaviors of Colloidal Inks from Shear-Based Models for Direct Ink Writing

M. Naimul Hoque and Gordon F. Christopher

J. of Materi Eng and Perform, 2025
DOI: 10.1007/s11665-025-10828-z

Direct ink writing of particle-based multiphase materials: From rheology to functionality

Stijn De Smedt, Benedetta Attaianese and Ruth Cardinaels

Current Opinion in Colloid & Interface Science, 2025, 75, 101889
DOI: 10.1016/j.cocis.2024.101889

Evaluation of the printability of agar and hydroxypropyl methylcellulose gels as gummy formulations: Insights from rheological properties

Morenikeji Aina, Fabien Baillon, Romain Sescousse, Noelia M Sanchez-ballester, Sylvie Begu, Ian Soulairol and Martial Sauceau

International Journal of Pharmaceutics, 2024, 654, 123937
DOI: 10.1016/j.ijpharm.2024.123937

Linking formulation feedstock to printability by robocasting: A case study of eco-friendly alumina pastes

Delphine Gourdonnaud, Julie Bourret, Vincent Pateloup, Lisa Giardi, Luc Picton, Vincent Chaleix, Thierry Chartier, Benoit Naït-Ali, Marguerite Bienia and Pierre-Marie Geffroy

Open Ceramics, 2024, 18, 100606
DOI: 10.1016/j.oceram.2024.100606

Viscoelastic properties of thermosensitive gelatin/tragacanth hydrogel as novel ink suitable for additive manufacturing: Effect of various additives on system's viscoelastic characteristics and printability

H. Zehtab Minooei and B. Kaffashi

J of Applied Polymer Sci, 2023, 140
DOI: 10.1002/app.54328

Viscosity of Mono‐ and Polydisperse Mixtures of Photopolymer and Rigid Spheres for Manufacturing of Engineered Composite Materials Using Vat Photopolymerization

John Reynolds, John Unterhalter, Mathieu Francoeur, Michael Bortner and Bart Raeymaekers

Adv Eng Mater, 2024, 26
DOI: 10.1002/adem.202301630

Design and function of thermoresponsive-ultrafast stiffening suspension formulations for 3D printing

Sharu Bhagavathi Kandy, Sebastian Remke, Thiyagarajan Ranganathan, Shubham Kiran Wani, Xiaodi Dai, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Torben Gädt, Samanvaya Srivastava and Gaurav Sant

Cement and Concrete Composites, 2025, 157, 105905
DOI: 10.1016/j.cemconcomp.2024.105905

Multi-Material Ink Direct Writing System with Material Switching Optimization

Xishuang Jing, Boyan Shen, Lesheng Yang, Jihao Ran, Xunsheng Du and Fubao Xie

3D Printing and Additive Manufacturing, 2025
DOI: 10.1089/3dp.2025.0043

Liquid‐Suspended and Liquid‐Bridged Liquid Metal Microdroplets

Jieun Kim and Joohyung Lee

Small, 2022, 18
DOI: 10.1002/smll.202108069

Machine Learning Reveals a General Understanding of Printability in Formulations Based on Rheology Additives

Ali Nadernezhad and Jürgen Groll

Advanced Science, 2022, 9
DOI: 10.1002/advs.202202638

Shaping Future Foods through Fermentation of Side Streams: Microbial, Chemical, and Physical Characteristics of Fermented Blends from Sunflower Seed Press Cake and Cheese Whey

Norbert Raak, Nicola Mangieri, Roberto Foschino and Milena Corredig

Foods, 2023, 12, 4099
DOI: 10.3390/foods12224099

Realizing Highly‐Ordered Laser‐Reduced Graphene for High‐Performance Flexible Microsupercapacitor

Yirong Zhao, Jingwei Du, Jiajun Du, Qiongqiong Lu, Daria Mikhailova, Minghao Yu and Xiaojun Pan

Small, 2023, 19
DOI: 10.1002/smll.202301546

Impact of Nanoparticle Size and Loading on Printability of Composite Inks for Direct Ink Writing

Yun Li, Aidan Flynn, Christopher Masternick, Brandon Kolanovic, Bin Li and Bo Li

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401443

Advances and obstacles to unify the concept of “printability” in Ceramics Direct Ink Writing

Mathilde Maillard, Sylvain Fournier, Esther García-Tuñón and Edwin-Joffrey Courtial

Open Ceramics, 2025, 23, 100808
DOI: 10.1016/j.oceram.2025.100808

Poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene): A New Binder for Conventional and Printable Lithium-Ion Batteries

João C. Barbosa, Rafael S. Pinto, Loic Hilliou, Maria. M. Silva, Carlos M. Costa, Renato Gonçalves and Senentxu Lanceros-Méndez

ACS Appl. Energy Mater., 2021, 4, 14129
DOI: 10.1021/acsaem.1c02897

Direct ink writing of cellulose-plasticized aqueous ceramic slurry for YAG transparent ceramics

Haohao Ji, Jin Zhao, Jie Chen, Shunzo Shimai, Hetuo Chen, Guohong Zhou, Yu Liu, Jian Zhang, Shiwei Wang and Dongliang Yang

MRS Communications, 2022, 12, 206
DOI: 10.1557/s43579-022-00163-y

Silicon-doped calcium phosphates; the critical effect of synthesis routes on the biological performance

F. Kermani, A. Gharavian, S. Mollazadeh, S. Kargozar, A. Youssefi and J. Vahdati Khaki

Materials Science and Engineering: C, 2020, 111, 110828
DOI: 10.1016/j.msec.2020.110828

GO CaBER: Capillary breakup and steady-shear experiments on aqueous graphene oxide (GO) suspensions

Henry C.-H. Ng, Andrew Corker, Esther García-Tuñón and Robert J. Poole

Journal of Rheology, 2020, 64, 81
DOI: 10.1122/1.5109016

Decellularized cartilage tissue bioink formulation for osteochondral graft development

Aleksandra A Golebiowska, Mingyang Tan, Anson WK Ma and Syam P Nukavarapu

Biomed. Mater., 2025, 20, 025002
DOI: 10.1088/1748-605X/ada59d

Advancing Indoor Air Purification by Mass Transfer Enhancement: Bridging the Gap Between High-Performance Materials and Technologies

Enze Tian, Qiwei Chen, Yilun Gao, Zhuo Chen, Yan Wang and Jinhan Mo

Engineering, 2025
DOI: 10.1016/j.eng.2025.07.003

Size-dependent viscoelasticity in hybrid colloidal gels based on spherical soft nanoparticles and two-dimensional nanosilicates of varying size

Gelareh Rezvan, Mohsen Esmaeili, Monirosadat Sadati and Nader Taheri-Qazvini

Journal of Colloid and Interface Science, 2024, 656, 577
DOI: 10.1016/j.jcis.2023.11.135

Recent Progress and Perspectives of Direct Ink Writing Applications for Mass Transfer Enhancement in Gas‐Phase Adsorption and Catalysis

Qiwei Chen, Enze Tian, Yan Wang, Jinhan Mo, Guiyin Xu and Meifang Zhu

Small Methods, 2023, 7
DOI: 10.1002/smtd.202201302

Direct Ink Writing: A 3D Printing Technology for Diverse Materials

M. A. S. R. Saadi, Alianna Maguire, Neethu T. Pottackal, Md Shajedul Hoque Thakur, Maruf Md. Ikram, A. John Hart, Pulickel M. Ajayan and Muhammad M. Rahman

Advanced Materials, 2022, 34
DOI: 10.1002/adma.202108855

3D Assembly of Graphene Nanomaterials for Advanced Electronics

Hortense Le Ferrand, Sakineh Chabi and Shweta Agarwala

Advanced Intelligent Systems, 2020, 2
DOI: 10.1002/aisy.201900151

Whole-grain highland barley premade biscuit prepared by hot-extrusion 3D printing: Printability and nutritional assessment

Tianli Guo, Tongtong Wang, Ling Chen and Bo Zheng

Food Chemistry, 2024, 432, 137226
DOI: 10.1016/j.foodchem.2023.137226

Self-assembly of plant polyphenols-grafted soy proteins to manufacture a highly stable antioxidative Pickering emulsion gel for direct-ink-write 3D printing

Adeleh Mohammadi, Peyman Asghartabar Kashi, Mahboobeh Kashiri, Amirhossein Bagheri, Jianshe Chen, Rammile Ettelaie, Henry Jäger and Mahdiyar Shahbazi

Food Hydrocolloids, 2023, 142, 108851
DOI: 10.1016/j.foodhyd.2023.108851

Piezoelectric-pneumatic material jetting printing for non-contact conformal fabrication of high-temperature thick-film sensors

Xiong Zhou, Lida Xu, Lantian Tang, Xiaolong Lin, Xianwei Qian, Muhan Wu, Lingyun Wang and Chao Wu

Additive Manufacturing, 2024, 83, 104058
DOI: 10.1016/j.addma.2024.104058

Printability of elastomer as a 3D printing material for additive manufacturing

Archisman Dasgupta and Prasenjit Dutta

J Rubber Res, 2024, 27, 137
DOI: 10.1007/s42464-024-00241-x

Innovative coaxial high-temperature thin-film sensor with core–shell structure surpassing traditional multilayer films

Chao Wu, Guo-Chun Chen, Fu-Xin Zhao, Fan Lin, Ying-Jun Zeng, Yan-Zhang Fu, Yan-Song Zhang, Li-Da Xu, Qin-Nan Chen, Rui Tang, Dao-Heng Sun and Zhen-Yin Hai

Rare Met., 2024, 43, 3854
DOI: 10.1007/s12598-023-02612-6

A review on 3D printing with clay and sawdust/natural fibers: Printability, rheology, properties, and applications

Biva Gyawali, Ramtin Haghnazar, Pavan Akula, Kamran Alba and Vahid Nasir

Results in Engineering, 2024, 24, 103024
DOI: 10.1016/j.rineng.2024.103024

Mechanical Integrity in a Dynamic Interpenetrating Hydrogel Network of Supramolecular Peptide–Polysaccharide Supports Enhanced Chondrogenesis

Jijo Thomas, Nidhi Gupta, Jojo P. Joseph, Vianni Chopra, Asish Pal and Deepa Ghosh

ACS Biomater. Sci. Eng., 2021, 7, 5798
DOI: 10.1021/acsbiomaterials.1c01120

Rheology in Product Development: An Insight into 3D Printing of Hydrogels and Aerogels

Raquel V. Barrulas and Marta C. Corvo

Gels, 2023, 9, 986
DOI: 10.3390/gels9120986

Rheological characterization of pastes of alumina-toughened zirconia with additions of carbon nanofibers and evaluation of their printability via material extrusion

Vivian Inês dos Santos, Márcio Celso Fredel, Rafael Costa de Matos, Bruno Henriques and Laurent Gremillard

Journal of Manufacturing Processes, 2024, 131, 1784
DOI: 10.1016/j.jmapro.2024.09.094

Fourier-transform rheology and printability maps of complex fluids for three-dimensional printing

Esther García-Tuñón, Rishav Agrawal, Bin Ling and David J. C. Dennis

Physics of Fluids, 2023, 35
DOI: 10.1063/5.0128658

A comprehensive review of ceramic additive manufacturing: Advancements in Direct Ink Writing (DIW) and tribological properties of 3D-printed ceramics

M. Alebrahim, M.J. Ghazali, N.H. Jamadon and Y. Otsuka

Tribology International, 2025, 207, 110606
DOI: 10.1016/j.triboint.2025.110606

Effect of stirring time on viscoelastic properties of liquid gallium-oxide amalgams

Hyeong Yong Song, Si Yoon Kim, Min Seo Park, Jun Dong Park and Kyu Hyun

Korea-Aust. Rheol. J., 2024, 36, 375
DOI: 10.1007/s13367-024-00105-1

Understanding the yielding behavior of graphene oxide colloids via experimental strain decomposition

Simon A. Rogers

Physics of Fluids, 2023, 35
DOI: 10.1063/5.0156022

Understanding the combinatorial impact of amino acids as bio-linker on rheological behavior of gellan hydrogel blends

Nandita Srivastava and Anirban Roy Choudhury

International Journal of Biological Macromolecules, 2025, 303, 140686
DOI: 10.1016/j.ijbiomac.2025.140686

Ultrafast stiffening of concentrated thermoresponsive mineral suspensions

Sharu Bhagavathi Kandy, Iman Mehdipour, Narayanan Neithalath, Aditya Kumar, Mathieu Bauchy, Edward Garboczi, Samanvaya Srivastava, Torben Gaedt and Gaurav Sant

Materials & Design, 2022, 221, 110905
DOI: 10.1016/j.matdes.2022.110905

Direct ink printing reduced graphene oxide/KCu7S4 electrodes for high-performance supercapacitors

Yanliang Zhao, Fei Liu, Zhanyong Zhao, Peikang Bai, Yong Ma, A. Alhadhrami, Gaber A. M. Mersal, Zhiping Lin, Mohamed M. Ibrahim and Zeinhom M. El-Bahy

Adv Compos Hybrid Mater, 2022, 5, 1516
DOI: 10.1007/s42114-022-00488-1

Effect of particle shape on rheology and printability of highly filled reactive inks for direct ink writing

Andrew House, Anna Kuna, Daniel Hastings, Nikki Rodriguez, Mirko Schoenitz, Edward L. Dreizin and Murat Guvendiren

Prog Addit Manuf, 2023, 8, 1573
DOI: 10.1007/s40964-023-00422-x

Si3N4 ceramics with embedded microchannel structures fabricated by high-precision additive manufacturing based on computational fluid dynamics simulations

Yitian Yang, Zhihua Yang, Peigang He, Xiaoming Duan, Delong Cai, Dechang Jia and Yu Zhou

Additive Manufacturing, 2022, 60, 103271
DOI: 10.1016/j.addma.2022.103271

Understanding the large deformation response of paste-like 3D food printing inks

Yagmur Bugday, Alexandra Alicke, Patrick Anderson and Ruud van der Sman

Applied Rheology, 2025, 35
DOI: 10.1515/arh-2025-0042

Izod impact resistance of 3D printed discontinuous fibrous composites with Bouligand structure

Lizhi Guan, Weixiang Peng, Rachel Ng Jing Wen, Jingbo Fan and Hortense Le Ferrand

NPG Asia Mater, 2023, 15
DOI: 10.1038/s41427-023-00508-6

3D printing of an anode scaffold for lithium batteries guided by mixture design-based sequential learning

Domenic Cipollone, Hui Yang, Feng Yang, Joeseph Bright, Botong Liu, Nicholas Winch, Nianqiang Wu and Konstantinos A. Sierros

Journal of Materials Processing Technology, 2021, 295, 117159
DOI: 10.1016/j.jmatprotec.2021.117159

Pressure-based process monitoring of direct-ink write material extrusion additive manufacturing

Jessica W. Kopatz, Derek Reinholtz, Adam W. Cook, Alexander S. Tappan and Anne M. Grillet

Additive Manufacturing, 2024, 80, 103928
DOI: 10.1016/j.addma.2023.103928

Rheological and Printability Assessments on Biomaterial Inks of Nanocellulose/Photo-Crosslinkable Biopolymer in Light-Aided 3D Printing

Qingbo Wang, Oskar Backman, Markus Nuopponen, Chunlin Xu and Xiaoju Wang

Front. Chem. Eng., 2021, 3
DOI: 10.3389/fceng.2021.723429

Material extrusion of electrochemical energy storage devices for flexible and wearable electronic applications

Sudhansu Sekhar Nath, Ishant G. Patil and Poonam Sundriyal

Journal of Energy Storage, 2024, 79, 110129
DOI: 10.1016/j.est.2023.110129

Coaxially 3D-printed ceramic scaffolds for thermal energy storage applications

L. Moreno-Sanabria, I. Díaz-Herrezuelo, M.I. Osendi, M. Belmonte and P. Miranzo

Journal of the European Ceramic Society, 2025, 45, 117531
DOI: 10.1016/j.jeurceramsoc.2025.117531

Tuning the Thermogelation and Rheology of Poly(2-Oxazoline)/Poly(2-Oxazine)s Based Thermosensitive Hydrogels for 3D Bioprinting

Malik Salman Haider, Taufiq Ahmad, Mengshi Yang, Chen Hu, Lukas Hahn, Philipp Stahlhut, Jürgen Groll and Robert Luxenhofer

Gels, 2021, 7, 78
DOI: 10.3390/gels7030078