Issue 45, 2020

An energy efficient bi-functional electrode for continuous cation-selective capacitive deionization

Abstract

Effective ion intercalation nanomaterials provide tremendous opportunities to various deionization systems such as capacitive deionization (CDI) to significantly improve the removal capacity of brackish water desalination. However, the asymmetric design of CDI devices causes a low removal rate due to the indispensable regeneration half-cycle. Furthermore, choices of chloride selective electrodes for such devices are limited. This imposes a big challenge on further improvement of CDI systems. Herein, we report a cation-selective CDI system using a single bi-functional Na2VTi(PO4)3@carbon nanomaterial with redox couples of V4+/V3+ and Ti3+/Ti4+ as an advanced symmetric electrode. The as-prepared continuous desalination set-up shows a superior removal rate of 0.022 mg g−1 s−1 (1.32 mg g−1 min−1) with a high half-cycle removal capacity of 35 mg g−1, and extremely low energy consumption of 0.14 W h g−1 (at a current density of 100 mA g−1). In addition, an extremely high cycle-stability of at least 50 cycles is achieved. The bi-functional intercalation mechanism is investigated by in situ XRD and ex situ XPS. The symmetric device yields a simplified and low-cost configuration with improved energy efficiency and high removal capacity. This opens a new horizon towards the commercialization of CDI technologies.

Graphical abstract: An energy efficient bi-functional electrode for continuous cation-selective capacitive deionization

Supplementary files

Article information

Article type
Communication
Submitted
07 aug 2020
Accepted
13 okt 2020
First published
14 okt 2020

Nanoscale, 2020,12, 22917-22927

An energy efficient bi-functional electrode for continuous cation-selective capacitive deionization

S. Vafakhah, M. Saeedikhani, M. Tanhaei, S. Huang, L. Guo, S. Y. Chiam and H. Y. Yang, Nanoscale, 2020, 12, 22917 DOI: 10.1039/D0NR05826B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements