Issue 1, 2019

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

Abstract

3D printing has emerged as a valuable approach for the fabrication of fluidic devices and may replace soft-lithography as the method of choice for rapid prototyping. The potential of this disruptive technology is much greater than this – it allows for functional integration in a single, highly automated manufacturing step in a cost and time effective manner. Integration of functionality with a 3D printer can be done through spatial configuration of a single material, inserting pre-made components mid-print in a print-pause-print approach, and/or through the precise spatial deposition of different materials with a multimaterial printer. This review provides an overview on the ways in which 3D printing has been exploited to create and use fluidic devices with different functionality, which provides a basis for critical reflection on the current deficiencies and future opportunities for integration by 3D printing.

Graphical abstract: Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

Article information

Article type
Critical Review
Submitted
10 aug 2018
Accepted
06 nov 2018
First published
08 nov 2018
This article is Open Access
Creative Commons BY-NC license

Lab Chip, 2019,19, 35-49

Increasing the functionalities of 3D printed microchemical devices by single material, multimaterial, and print-pause-print 3D printing

F. Li, N. P. Macdonald, R. M. Guijt and M. C. Breadmore, Lab Chip, 2019, 19, 35 DOI: 10.1039/C8LC00826D

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements