Cross Reference Logo
Citations to this article as recorded by CrossRef and RSC Journals (195 citations).

Digital manufacturing for accelerating organ-on-a-chip dissemination and electrochemical biosensing integration
Juan F. Hernández-Rodríguez, Miguel Ángel López, Daniel Rojas and Alberto Escarpa
Lab Chip, 2022, 22, 4805
DOI: 10.1039/D2LC00499B

A review on the surface modification of materials for 3D-printed diagnostic devices
Mridupaban Deka, Nibedita Sinha, Rajkamal Das, Nihal Kumar Hazarika, Hrishikesh Das, Bethuel Daurai and Manashjit Gogoi
Anal. Methods, 2024, 16, 485
DOI: 10.1039/D3AY01742G

Screen printing and laser-induced flexible sensors for the simultaneous sensitive detection of uric acid, tyrosine, and ascorbic acid in sweat
Shuwen Chen, Zhikang Cao, Kang Zhou, Shaoguang Li, Hui Li, Kaichen Xu, Haibin Tang, Heng Deng, Qitao Zhou, Jing Pan and Fan Xia
Analyst, 2023, 148, 2965
DOI: 10.1039/D3AN00591G

Recent progress of conductive 3D-printed electrodes based upon polymers/carbon nanomaterials using a fused deposition modelling (FDM) method as emerging electrochemical sensing devices
Muhamad Huzaifah Omar, Khairunisak Abdul Razak, Mohd Nadhir Ab Wahab and Hairul Hisham Hamzah
RSC Adv., 2021, 11, 16557
DOI: 10.1039/D1RA01987B

3D printing pen for patterning electrochemical sensors on a paper platform for capsaicin detection
Bruno Ferreira, Iana V. S. Arantes, Robert D. Crapnell, Elena Bernalte, Craig E. Banks and Thiago R. L. C. Paixao
Analyst, 2025, 150, 1533
DOI: 10.1039/D4AN01382D

The effect of water ingress on additively manufactured electrodes
Rhys J. Williams, Tom Brine, Robert D. Crapnell, Alejandro Garcia-Miranda Ferrari and Craig E. Banks
Mater. Adv., 2022, 3, 7632
DOI: 10.1039/D2MA00707J

Electroanalysis overview: additive manufactured biosensors using fused filament fabrication
Robert D. Crapnell and Craig E. Banks
Anal. Methods, 2024, 16, 2625
DOI: 10.1039/D4AY00278D

3D-printed electrodes for electrochemical detection of environmental analytes
Liangliang Pan, Shijing Zhou, Jiaying Yang, Tongyun Fei, Shuduan Mao, Li Fu and Cheng-Te Lin
Anal. Methods, 2025, 17, 2235
DOI: 10.1039/D4AY02271H

Exploration of defined 2-dimensional working electrode shapes through additive manufacturing
Alejandro Garcia-Miranda Ferrari, Nicholas J. Hurst, Elena Bernalte, Robert D. Crapnell, Matthew J. Whittingham, Dale A. C. Brownson and Craig E. Banks
Analyst, 2022, 147, 5121
DOI: 10.1039/D2AN01412B

Additively manufactured microplate for the simultaneous colorimetric and electrochemical detection of atropine
Larissa M. A. Melo, Elena Bernalte, Robert D. Crapnell, Matthew J. Whittingham, Rodrigo A. A. Munoz, Wallans T. P. dos Santos and Craig E. Banks
Analyst, 2025, 150, 4832
DOI: 10.1039/D5AN00897B

Direct writing of graphene electrodes for point-of-care electrochemical sensing applications
Lei Zhao, Andrew Piper, Giulio Rosati and Arben Merkoçi
Sens. Diagn., 2024, 3, 1406
DOI: 10.1039/D4SD00140K

Beyond fossil plastics: next-generation PLA-based bio-packaging for industrial applications – advances, challenges, and data-driven insights
Naja Hasoon K.T. and Unnikrishnan Gopalakrishna Panicker
RSC Adv., 2026, 16, 15095
DOI: 10.1039/D5RA08379F

Exploring the coating of 3D-printed insulating substrates with conductive composites: a simple, cheap and versatile strategy to prepare customized high-performance electrochemical sensors
Fabiano Mendonça de Oliveira, Maria Zizi Martins Mendonça, Natália Canhete de Moraes, Jacqueline Marques Petroni, Matheus Meneguel Neves, Edmar Isaias de Melo, Bruno Gabriel Lucca and Rodrigo Amorim Bezerra da Silva
Anal. Methods, 2022, 14, 3345
DOI: 10.1039/D2AY00803C

Exploring the potential of 3D-printed solvent activated electrodes for salicylic acid analysis
Karolina Kwaczyński, Olga Szymaniec, Diana M. Bobrowska and Lukasz Poltorak
Analyst, 2025, 150, 2600
DOI: 10.1039/D5AN00195A

Eco-friendly integration of gold nanoparticles into additive manufacturing filaments: advancing conductivity and electrochemical performance
Elena Bernalte, Karen K. L. Augusto, Robert D. Crapnell, Hayley G. Andrews, Orlando Fatibello-Filho and Craig E. Banks
RSC Appl. Interfaces, 2025, 2, 439
DOI: 10.1039/D4LF00368C

3D-printing for forensic chemistry: voltammetric determination of cocaine on additively manufactured graphene–polylactic acid electrodes
Raquel G. Rocha, Julia S. Ribeiro, Mário H. P. Santana, Eduardo M. Richter and Rodrigo A. A. Muñoz
Anal. Methods, 2021, 13, 1788
DOI: 10.1039/D1AY00181G

Simultaneous detection of dopamine and ascorbic acid by using a thread-based microfluidic device and multiple pulse amperometry
Vanessa W. dos Santos, Gustavo Martins, Jeferson L. Gogola, Cristiane Kalinke, Deonir Agustini, Márcio F. Bergamini and Luiz H. Marcolino-Junior
Anal. Methods, 2023, 15, 4862
DOI: 10.1039/D3AY00693J

From conductive filament design to 3D-printed devices: a critical review and development guide for advanced electrochemical applications
Raquel G. Rocha, Gilvana P. Siqueira, Ana C. M. Oliveira, Elena Bernalte, Robert D. Crapnell, Agata Rodak, Krzysztof Formela, Mateusz Cieślik, Craig E. Banks, Eduardo M. Richter, Jacek Ryl and Rodrigo A. A. Muñoz
J. Mater. Chem. A, 2026, 14, 11930
DOI: 10.1039/D5TA09486K

Utilising highly conductive TPU “sticks” for facile and low-cost electroanalysis
Ana C. M. Oliveira, Elena Bernalte, Robert D. Crapnell, Rodrigo A. A. Muñoz and Craig E. Banks
Analyst, 2025, 150, 3147
DOI: 10.1039/D5AN00472A

The effects of different plasticisers on the electrochemical performance of bespoke conductive additive manufacturing filaments using recycled PLA
Robert D. Crapnell, Iana V. S. Arantes, Elena Bernalte, Evelyn Sigley, Graham C. Smith, Thiago R. L. C. Paixão and Craig E. Banks
Analyst, 2025, 150, 2702
DOI: 10.1039/D4AN00969J

Fully 3D printing of carbon black-thermoplastic hybrid materials and fast activation for development of highly stable electrochemical sensors
Habdias A. Silva-Neto, Murilo Santhiago, Lucas C. Duarte and Wendell K.T. Coltro
Sensors and Actuators B: Chemical, 2021, 349, 130721
DOI: 10.1016/j.snb.2021.130721

The Current Shortcomings and Future Possibilities of 3D Printed Electrodes
William B. Veloso, Thiago R. L. C. Paixão and Gabriel N. Meloni
Anal. Chem., 2024, 96, 14315
DOI: 10.1021/acs.analchem.4c02127

Novel and rapid analytical platform development enabled by advances in 3D printing
Alexander S. Malinick, Cole P. Ebel, Daniel D. Stuart, Santino N. Valiulis, Victor A. Hanson and Quan Cheng
Front. Anal. Sci., 2024, 4
DOI: 10.3389/frans.2024.1505510

3D-printed biosensors for electrochemical and optical applications
Jose Muñoz and Martin Pumera
TrAC Trends in Analytical Chemistry, 2020, 128, 115933
DOI: 10.1016/j.trac.2020.115933

Fabrication and optimization of a hybrid 3D-printed flexible electrochemical biosensor for sensitive detection of 1-hydroxypyrene glucuronide, an associated wildfire exposure biomarker
Yonghao Fu, Chuchu Chen, Xinyi Li, Yang Song, Christopher D. Simpson, Luke P. Naeher, Kaiyan Qiu and Dan Du
Talanta, 2026, 307, 129778
DOI: 10.1016/j.talanta.2026.129778

Additively manufactured carbon/black-integrated polylactic acid 3Dprintedsensor for simultaneous quantification of uric acid and zinc in sweat
Vanessa N. Ataide, Diego P. Rocha, Abner de Siervo, Thiago R. L. C. Paixão, Rodrigo A. A. Muñoz and Lucio Angnes
Microchim Acta, 2021, 188
DOI: 10.1007/s00604-021-05007-5

Low-cost conductive polypropylene for electroanalysis in organic solvents using additively manufactured electrodes
Bruno Ferreira, Robert D. Crapnell, Elena Bernalte, Thiago R.L.C. Paixão and Craig E. Banks
Electrochimica Acta, 2025, 515, 145680
DOI: 10.1016/j.electacta.2025.145680

3D-printed hybrid-carbon-based electrodes for electroanalytical sensing applications
Jesús E. Contreras-Naranjo, Victor H. Perez-Gonzalez, Marco A. Mata-Gómez and Oscar Aguilar
Electrochemistry Communications, 2021, 130, 107098
DOI: 10.1016/j.elecom.2021.107098

Deposition of gold nanoparticles is varied by different scales of various surface patterns on 3D printed electrodes
Chloe Miller, Khalil K. Hussain, Oliver Keattch and Bhavik Anil Patel
Electrochimica Acta, 2025, 529, 146401
DOI: 10.1016/j.electacta.2025.146401

3D-printed immunosensor for the diagnosis of Parkinson’s disease
Cristiane Kalinke, Paulo Roberto De Oliveira, Craig E. Banks, Bruno Campos Janegitz and Juliano Alves Bonacin
Sensors and Actuators B: Chemical, 2023, 381, 133353
DOI: 10.1016/j.snb.2023.133353

Rapid Activation of 3D-Printed Carbon Electrodes by Atmospheric Air Plasma: Toward Electrochemical Drug Analysis
Miroslav Kováč, Katarína Gregová, Ĺubomíŕ́ Švorc, František Zažímal, Tomáš Homola and Pavol Gemeiner
ACS Omega, 2025, 10, 40435
DOI: 10.1021/acsomega.5c05879

Surface activation and functionalization with aryl-diazonium chemistry enable biomolecules grafting on 3D printed carbon-based electrodes
Mathilde Manceau, Carole Farre, Laurène Tétard, François Bessueille, Marie Martin, Jasmina Vidic, Yanxia Hou, Carole Chaix and Florence Lagarde
Bioelectrochemistry, 2026, 170, 109254
DOI: 10.1016/j.bioelechem.2026.109254

Lab-on-a-Scalpel: Medical Tool Incorporating a Disposable Fully 3D-Printed Electrochemical Cell Promoting Drop-Volume Chemical Analysis in the Operating Theater
Anastasios V. Papavasileiou, Lukáš Děkanovský and Zdeněk Sofer
Anal. Chem., 2025, 97, 10709
DOI: 10.1021/acs.analchem.5c00599

Emerging Biomedical and Clinical Applications of 3D-Printed Poly(Lactic Acid)-Based Devices and Delivery Systems
Allan John R. Barcena, Prashanth Ravi, Suprateek Kundu and Karthik Tappa
Bioengineering, 2024, 11, 705
DOI: 10.3390/bioengineering11070705

3D-Printed Microelectrodes for Biological Measurement
Zehao Xue, Kanisha Patel, Paankhuri Bhatia, Chloe L. Miller, Ricoveer Singh Shergill and Bhavik Anil Patel
Anal. Chem., 2024, 96, 12701
DOI: 10.1021/acs.analchem.4c01585

N-doped graphene quantum dots and gold co-modified 3D printed electrode for sensitive detection of dopamine
Lian Zhong, Xinhao Du, Yanyu Jiang, Jie Wen, Xuemei Wang, Wuji Shuoti, Ruihan Peng, Meifang Liao, Jing Ou, Yaxin Yang and Lujun Wang
Microchemical Journal, 2025, 212, 113432
DOI: 10.1016/j.microc.2025.113432

Augmentation of conductive pathways in carbon black/PLA 3D-printed electrodes achieved through varying printing parameters
A. Abdalla, H.H. Hamzah, O. Keattch, D. Covill and B.A. Patel
Electrochimica Acta, 2020, 354, 136618
DOI: 10.1016/j.electacta.2020.136618

Sensitive, Integrated, Mass‐produced, Portable and Low‐cost Electrochemical 3D-printed Sensing Set (SIMPLE-3D-SenS): A promising analytical tool for forensic applications
Thaylor Teixeira Conrado, Evandro Rodrigo Pedão, Valdir Souza Ferreira, Katia Motta, Anielle Christine Almeida Silva, Rodrigo Amorim Bezerra da Silva, Jacqueline Marques Petroni and Bruno Gabriel Lucca
Sensors and Actuators B: Chemical, 2025, 427, 137215
DOI: 10.1016/j.snb.2024.137215

3D-printed transmembrane glycoprotein cancer biomarker aptasensor
Agustín G. Crevillen, Carmen C. Mayorga-Martinez, Jaroslav Zelenka, Silvie Rimpelová, Tomáš Ruml and Martin Pumera
Applied Materials Today, 2021, 24, 101153
DOI: 10.1016/j.apmt.2021.101153

Advances and the growing role of additive manufacturing in the development of 3D-printed electrochemical sensors
Theodora W. von Zuben, Jéssica R. Camargo, Raquel G. Rocha, Pãmyla L. dos Santos, Eduardo M. Richter, Bruno C. Janegitz, Rodrigo A. A. Munoz and Juliano A. Bonacin
Electrochimica Acta, 2025, 543, 147566
DOI: 10.1016/j.electacta.2025.147566

The Effect of Slicer Infill Pattern on the Electrochemical Performance of Additively Manufactured Electrodes
Elena Bernalte, Robert D. Crapnell, Ouissal M. A. Messai and Craig E. Banks
ChemElectroChem, 2024, 11
DOI: 10.1002/celc.202300576

Harnessing the potential of artificial intelligence and 3D-printed electrochemical sensors for environmental analysis
Ravery Sebuyoya and Glen D. O'Neil
Current Opinion in Electrochemistry, 2026, 55, 101772
DOI: 10.1016/j.coelec.2025.101772

Controlling Morphing Behavior in 4D Printing: A Review About Microstructure and Macrostructure Changes in Polylactic Acid
Mylene S. Cadete, Tiago E.P. Gomes, Idalina Gonçalves and Victor Neto
3D Printing and Additive Manufacturing, 2023, 10, 1455
DOI: 10.1089/3dp.2022.0088

Recent achievements of greenness metrics on paper-based electrochemical (bio) sensors for environmental and clinical analysis
Habdias A. Silva-Neto, Lucas F. de Lima, Danielly S. Rocha, Vanessa N. Ataide, Gabriel N. Meloni, Giulia Moro, Ada Raucci, Stefano Cinti, Thiago R.L.C. Paixão, William R. de Araujo and Wendell K.T. Coltro
TrAC Trends in Analytical Chemistry, 2024, 174, 117675
DOI: 10.1016/j.trac.2024.117675

A review on thermoplastic electrodes: From fabrication to electrochemical (Bio)sensing applications
Ariel Dayan, Gilberto J. Silva Junior, Lucio Angnes, Vanessa N. Ataide, Lauro A. Pradela-Filho and Thiago R.L.C. Paixão
Analytica Chimica Acta, 2025, 1380, 344518
DOI: 10.1016/j.aca.2025.344518

3D‐printed amperometric sensor for the detection of ethanol in saliva
Theodora Wrobel von Zuben, Cristiane Kalinke, Bruno Campos Janegitz, Airton Gonçalves Salles and Juliano Alves Bonacin
Electroanalysis, 2023, 35
DOI: 10.1002/elan.202300044

Development and Application of 3D‐Printed Electrochemical Sensors for Ciprofloxacin Detection
Brunna F. Henriques, Amanda Neumann, Lucas V. Bertolim, Rafaela C. de Freitas, Luiz R. G. Silva, Jéssica S. Stefano and Bruno C. Janegitz
Electroanalysis, 2024
DOI: 10.1002/elan.202400307

A novel strategy for fabrication, activation and cleaning of fully 3D printed flexible planar electrochemical platforms
Cristian Grazioli, Rossella Svigelj and Nicolò Dossi
Electroanalysis, 2023, 35
DOI: 10.1002/elan.202300013

Enhanced electrochemical performance of 3D-printed electrodes via blue-laser irradiation and (electro)chemical treatment
Mayane S. Carvalho, Raquel G. Rocha, Amanda Beatriz Nascimento, Diele A.G. Araújo, Thiago R.L.C. Paixão, Osmando F. Lopes, Eduardo M. Richter and Rodrigo A.A. Muñoz
Electrochimica Acta, 2024, 506, 144995
DOI: 10.1016/j.electacta.2024.144995

Additive Manufacturing of Customized Flexible Wearable Sensors for Sweat Analysis with Bespoke, Low-Cost Conductive TPU
Mayane S. Carvalho, Elena Bernalte, Ana C. M. Oliveira, Eduardo M. Richter, Rodrigo A. A. Muñoz, Robert D. Crapnell and Craig E. Banks
ACS Meas. Sci. Au, 2025, 5, 842
DOI: 10.1021/acsmeasuresciau.5c00095

MXene-functionalised 3D-printed electrodes for electrochemical capacitors
Edurne Redondo and Martin Pumera
Electrochemistry Communications, 2021, 124, 106920
DOI: 10.1016/j.elecom.2021.106920

Microwave-Induced Processing of Free-Standing 3D Printouts: An Effortless Route to High-Redox Kinetics in Electroanalysis
Kornelia Kozłowska, Mateusz Cieślik, Adrian Koterwa, Krzysztof Formela, Jacek Ryl and Paweł Niedziałkowski
Materials, 2024, 17, 2833
DOI: 10.3390/ma17122833

Electrochemical (Bio)Sensors Enabled by Fused Deposition Modeling-Based 3D Printing: A Guide to Selecting Designs, Printing Parameters, and Post-Treatment Protocols
Jéssica Santos Stefano, Cristiane Kalinke, Raquel Gomes da Rocha, Diego Pessoa Rocha, Vinicius Aparecido Oliani Pedro da Silva, Juliano Alves Bonacin, Lúcio Angnes, Eduardo Mathias Richter, Bruno Campos Janegitz and Rodrigo Alejandro Abarza Muñoz
Anal. Chem., 2022, 94, 6417
DOI: 10.1021/acs.analchem.1c05523

Development and Application of 3D‐Printed Electrochemical Sensors for Ciprofloxacin Detection
Brunna F. Henriques, Amanda Neumann, Lucas V. Bertolim, Rafaela C. de Freitas, Luiz R. G. Silva, Jéssica S. Stefano and Bruno C. Janegitz
Electroanalysis, 2025, 37
DOI: 10.1002/elan.12008

Heterolayered carbon allotrope architectonics via multi-material 3D printing for advanced electrochemical devices
Mario Palacios-Corella, Michela Sanna, José Muñoz, Kalyan Ghosh, Stefan Wert and Martin Pumera
Virtual and Physical Prototyping, 2023, 18
DOI: 10.1080/17452759.2023.2276260

3D-printed reduced graphene oxide/polylactic acid electrodes: A new prototyped platform for sensing and biosensing applications
Vinicius A.O.P. Silva, Wilson S. Fernandes-Junior, Diego P. Rocha, Jéssica S. Stefano, Rodrigo A.A. Munoz, Juliano A. Bonacin and Bruno C. Janegitz
Biosensors and Bioelectronics, 2020, 170, 112684
DOI: 10.1016/j.bios.2020.112684

Print–Pause–Print Fabrication of Tailored Electrochemical Microfluidic Devices
Juan F. Hernández-Rodríguez, Daniel Rojas and Alberto Escarpa
Anal. Chem., 2023, 95, 18679
DOI: 10.1021/acs.analchem.3c03364

Fully integrated 3D-printed electrochemical cell with a modified inkjet-printed Ag electrode for voltammetric nitrate analysis
Sarah May Sibug-Torres, Lance P. Go, Virgil Christian G. Castillo, Jiena Lynne R. Pauco and Erwin P. Enriquez
Analytica Chimica Acta, 2021, 1160, 338430
DOI: 10.1016/j.aca.2021.338430

3D-printing pen versus desktop 3D-printers: Fabrication of carbon black/polylactic acid electrodes for single-drop detection of 2,4,6-trinitrotoluene
Rafael M. Cardoso, Diego P. Rocha, Raquel G. Rocha, Jéssica S. Stefano, Rodrigo A.B. Silva, Eduardo M. Richter and Rodrigo A.A. Muñoz
Analytica Chimica Acta, 2020, 1132, 10
DOI: 10.1016/j.aca.2020.07.034

Adjusting the Connection Length of Additively Manufactured Electrodes Changes the Electrochemical and Electroanalytical Performance
Robert D. Crapnell, Alejandro Garcia-Miranda Ferrari, Matthew J. Whittingham, Evelyn Sigley, Nicholas J. Hurst, Edmund M. Keefe and Craig E. Banks
Sensors, 2022, 22, 9521
DOI: 10.3390/s22239521

Unraveling the Versatility of Carbon Black – Polylactic Acid (CB/PLA) 3D‐Printed Electrodes via Sustainable Electrochemical Activation
Anastasios V. Papavasileiou, Lukáš Děkanovský, Levna Chacko, Bing Wu, Jan Luxa, Jakub Regner, Jan Paštika, Dana Koňáková and Zdeněk Sofer
Small Methods, 2025, 9
DOI: 10.1002/smtd.202402214

Novel Additive Manufactured Multielectrode Electrochemical Cell with Honeycomb Inspired Design for the Detection of Methyl Parathion in Honey Samples
Bruno C. Janegitz, Robert D. Crapnell, Paulo Roberto de Oliveira, Cristiane Kalinke, Matthew J. Whittingham, Alejandro Garcia-Miranda Ferrari and Craig E. Banks
ACS Meas. Sci. Au, 2023, 3, 217
DOI: 10.1021/acsmeasuresciau.3c00003

An Environmentally Friendly Three-Dimensional Printed Graphene-Integrated Polylactic Acid Electrochemical Sensor for the Quality Control of Biofuels
Afonso F. João, Tiago A. Matias, Jéssica S. Gomes, Robson R. Guimaraes, Raquel M. F. Sousa and Rodrigo A. A. Muñoz
ACS Sustainable Chem. Eng., 2021, 9, 16052
DOI: 10.1021/acssuschemeng.1c03361

Unconventional and Emerging Approaches to CO2 Reduction
Jeffrey G. Bell and Thomas C. Underwood
Sustainability, 2024, 16, 713
DOI: 10.3390/su16020713

How to Improve Sustainability in Fused Filament Fabrication (3D Printing) Research?
Cristiane Kalinke, Robert D. Crapnell, Paulo R. de Oliveira, Bruno C. Janegitz, Juliano A. Bonacin and Craig E. Banks
Global Challenges, 2024, 8
DOI: 10.1002/gch2.202300408

Enhanced 3D-printed Matrix for Electrocatalytic Detection: A Practical and Simple Electrochemical Platform
Artur Jędrzak and Teofil Jesionowski
Electrocatalysis, 2025, 16, 141
DOI: 10.1007/s12678-024-00910-w

3D printing and spray coating for synthesis and sensing electrode fabrication
Joshua Le, Ashlyn Stephenson, Abigail M. Ott, Bryce D. Charles, Kai Crouch, Hao Dang and Gabriel LeBlanc
J Appl Electrochem, 2026, 56
DOI: 10.1007/s10800-026-02459-6

Fully 3D Printed Miniaturized Electrochemical Platform With Plug-and-Play Graphitized Electrodes: Exhaustively Validated for Dopamine Sensing
K S Jaya Lakshmi, Ramya K, Khairunnisa Amreen and Sanket Goel
IEEE Open J. Nanotechnol., 2024, 5, 30
DOI: 10.1109/OJNANO.2024.3418840

Electrochemical fluidic fused filament fabricated devices (eF4D): In-channel electrode activation
Juan F. Hernández-Rodríguez, Daniel Rojas and Alberto Escarpa
Sensors and Actuators B: Chemical, 2023, 393, 134290
DOI: 10.1016/j.snb.2023.134290

3D Pen: A low-cost and portable tool for manufacture of 3D-printed sensors
Fabiano M. de Oliveira, Edmar I. de Melo and Rodrigo A.B. da Silva
Sensors and Actuators B: Chemical, 2020, 321, 128528
DOI: 10.1016/j.snb.2020.128528

Additive Manufacturing Sensor for Stress Biomarker Detection
Vinicius A. O. P. da Silva, Jéssica S. Stefano, Cristiane Kalinke, Juliano A. Bonacin and Bruno C. Janegitz
Chemosensors, 2023, 11, 306
DOI: 10.3390/chemosensors11050306

Light-Addressable Electrochemical Sensing with Electrodeposited n-Silicon/Gold Nanoparticle Schottky Junctions
Irina M. Terrero Rodríguez, Alexandra J. Borrill, Katherine J. Schaffer, Jocelyn B. Hernandez and Glen D. O’Neil
Anal. Chem., 2020, 92, 11444
DOI: 10.1021/acs.analchem.0c02512

The emerging role of 3D printing in the fabrication of detection systems
Enrique Javier Carrasco-Correa, Ernesto Francisco Simó-Alfonso, José Manuel Herrero-Martínez and Manuel Miró
TrAC Trends in Analytical Chemistry, 2021, 136, 116177
DOI: 10.1016/j.trac.2020.116177

3D-printed sensor decorated with nanomaterials by CO2 laser ablation and electrochemical treatment for non-enzymatic tyrosine detection
William B. Veloso, Vanessa N. Ataide, Diego P. Rocha, Helton P. Nogueira, Abner de Siervo, Lucio Angnes, Rodrigo A. A. Muñoz and Thiago R. L. C. Paixão
Microchim Acta, 2023, 190
DOI: 10.1007/s00604-023-05648-8

Hydrogen production by 3D-printed electrodes
Mateus Veras Pereira, Naile Vacilotto Neumsteir and Juliano Alves Bonacin
Discov Mater, 2024, 4
DOI: 10.1007/s43939-024-00083-9

Lab-created conductive filament based on nickel and graphite particles: An attractive material for the additive manufacture of enhanced electrochemical sensors for non-enzymatic and selective glucose sensing
Natalia M. Caldas, Lucas V. de Faria, Amanda G. Batista, Anderson O. Alves, Cassiano C. de Souza, Pedro H.S. Borges, Edson Nossol, Renato C. Matos, Diego P. Rocha, Felipe S. Semaan and Rafael M. Dornellas
Talanta, 2025, 287, 127686
DOI: 10.1016/j.talanta.2025.127686

Simultaneous determination of morphine and codeine using additive-manufactured electrodes with conductive filaments based on recycled PLA
Carla C.B. de S. Andrade, Mariana C. Marra, Raquel G. Rocha, Marina Di-Oliveira, Ana C.M. Oliveira, Robert D. Crapnell, Eduardo M. Richter, Craig E. Banks and Rodrigo A.A. Muñoz
Microchemical Journal, 2025, 213, 113830
DOI: 10.1016/j.microc.2025.113830

Recent advances in design, and applications of electrochemical sensors focused on green screen-printed electrodes to monitor heavy metals in food and beverage
Zohre Eskandari Alughare, Alireza Sanati, Zahra Esfandiari and Parham Joolaei Ahranjani
Microchemical Journal, 2026, 223, 117192
DOI: 10.1016/j.microc.2026.117192

Green activation using reducing agents of carbon-based 3D printed electrodes: Turning good electrodes to great
Edurne Redondo, Jose Muñoz and Martin Pumera
Carbon, 2021, 175, 413
DOI: 10.1016/j.carbon.2021.01.107

Sensing of L-methionine in biological samples through fully 3D-printed electrodes
Cristiane Kalinke, Naile Vacionotto Neumsteir, Paulo Roberto de Oliveira, Bruno Campos Janegitz and Juliano Alves Bonacin
Analytica Chimica Acta, 2021, 1142, 135
DOI: 10.1016/j.aca.2020.10.034

Environmentally Friendly PLA-Based Conductive Composites: Electrical and Mechanical Performance
Nassima Naboulsi, Fatima Majid and Mohamed Louzazni
J. Compos. Sci., 2025, 9, 571
DOI: 10.3390/jcs9100571

A New Electrochemical Sensor for Dopamine Detection Based on Reduced Graphene Oxide Modified with Samarium Oxide Nanoparticles
Rodrigo Vieira Blasques, Vinicius Aparecido Pedro Oliani da Silva, Amanda Caroline Nascimento Sousa, Tatiana Maria Barreto de Freitas, Leliz Ticona Arenas, Glauber Cruz, Marcelo Barcellos da Rosa, Gabriel Braga Marques Teobaldo, Matheus Henrique Martins, Fabio Luiz Pissetti, Rita de Cássia Mendonça de Miranda, Luís Cláudio Nascimento da Silva and Paulo César Mendes Villis
ACS Omega, 2025, 10, 56290
DOI: 10.1021/acsomega.5c08166

Extrusion-Based 3D Printing Applications of PLA Composites: A Review
Eda Hazal Tümer and Husnu Yildirim Erbil
Coatings, 2021, 11, 390
DOI: 10.3390/coatings11040390

Voltammetric pH Measurements in Unadulterated Foodstuffs, Urine, and Serum with 3D-Printed Graphene/Poly(Lactic Acid) Electrodes
Fakher M. Rabboh and Glen D. O’Neil
Anal. Chem., 2020, 92, 14999
DOI: 10.1021/acs.analchem.0c02902

Conductive Polypropylene Additive Manufacturing Feedstock: Application to Aqueous Electroanalysis and Unlocking Nonaqueous Electrochemistry and Electrosynthesis
David L. O. Ramos, Robert D. Crapnell, Ridho Asra, Elena Bernalte, Ana C. M. Oliveira, Rodrigo A. A. Muñoz, Eduardo M. Richter, Alan M. Jones and Craig E. Banks
ACS Appl. Mater. Interfaces, 2024
DOI: 10.1021/acsami.4c12967

Cylindrical 3D-printed electrode based on carbon black and polylactic acid: an approach for electrochemical detection of the bithionol drug
Francisco Walison Lima Silva, Beatriz Rodrigues Freire, Claudio Sabbatini Capella Lopes, Fernanda Davi Marques, Braulio Soares Archanjo, Emerson Schwingel Ribeiro, Ricardo Erthal Santelli and Fernando Henrique Cincotto
Ionics, 2025, 31, 6343
DOI: 10.1007/s11581-025-06239-8

Recent Advances in the Investigation of Poly(lactic acid) (PLA) Nanocomposites: Incorporation of Various Nanofillers and their Properties and Applications
Nikolaos D. Bikiaris, Ioanna Koumentakou, Christina Samiotaki, Despoina Meimaroglou, Despoina Varytimidou, Anastasia Karatza, Zisimos Kalantzis, Magdalini Roussou, Rizos D. Bikiaris and George Z. Papageorgiou
Polymers, 2023, 15, 1196
DOI: 10.3390/polym15051196

Modifying the manufacturing process of high-graphite content polylactic acid filament for advanced energy and sensing applications in 3D printing
M.A. González-López, José Abraham González-López, Q.L. Reyes-Morales, Isa Pereyra and Jan Mayen
Polymer, 2024, 292, 126661
DOI: 10.1016/j.polymer.2023.126661

A comprehensive review of additive manufacturing techniques for conductive polymeric composites in energy storage applications
Reza Sedaghat, Seyed Amirreza Zareian, Sasan Sattarpanah Karganroudi and Mazeyar Parvinzadeh Gashti
Journal of Energy Storage, 2026, 151, 120392
DOI: 10.1016/j.est.2026.120392

3D printed graphite-based electrode coupled with batch injection analysis: An affordable high-throughput strategy for atorvastatin determination
Lucas V. de Faria, Suéllen F.L. do Nascimento, Luana M. Villafuerte, Felipe S. Semaan, Wagner F. Pacheco and Rafael M. Dornellas
Talanta, 2023, 265, 124873
DOI: 10.1016/j.talanta.2023.124873

Carbon-Black Integrated Polylactic Acid Electrochemical Sensor for Chloramphenicol Determination in Milk and Water Samples
Marina Di-Oliveira, Raquel G. Rocha, Lucas V. de Faria, Eduardo M. Richter and Rodrigo A. A. Munoz
J. Electrochem. Soc., 2022, 169, 047517
DOI: 10.1149/1945-7111/ac6454

Fully 3D printed electrochemical cell design with integrated electrodes array: A simple and versatile tool for sustainable electroanalysis
Liriana Mara Roveda, Vitor Ferreira Ottoni, Esmael Dias Prado, Thiago Sequinel, Patricia Hatsue Suegama, Cláudio Teodoro de Carvalho, Raphael Rodrigues, Marcela Zanetti Corazza and Magno Aparecido Gonçalves Trindade
Sustainable Materials and Technologies, 2025, 43, e01325
DOI: 10.1016/j.susmat.2025.e01325

Comparing electrochemical pre-treated 3D printed native and mechanically polished electrode surfaces for analytical sensing
Ricoveer Singh Shergill, Fernando Perez, Aya Abdalla and Bhavik Anil Patel
Journal of Electroanalytical Chemistry, 2022, 905, 115994
DOI: 10.1016/j.jelechem.2021.115994

Bio-waste to high-performance sensors: Thiourea-modified carbonised chitosan as a functional filler for 3D printable electrodes
Aleksandra Tober, Gilvana P. Siqueira, Agata Rodak, Katarzyna Lota, Mateusz Cieślik, Joanna Wysocka, Grzegorz Lota, Rodrigo A.A. Muñoz, Natalia A. Wójcik and Jacek Ryl
Electrochimica Acta, 2026, 549, 148068
DOI: 10.1016/j.electacta.2025.148068

Sensing of Alphacypermethrin Pesticide Using Modified Electrode of Chitosan-Silver Nanowire Nanocomposite Langmuir Blodgett Film
Sanjeev Bhandari, Abhijit Nath, L Robindro Singh, Manashjit Gogoi, Basudev Pradhan and Mrityunjoy Mahato
International Journal of Environmental Analytical Chemistry, 2024, 104, 1817
DOI: 10.1080/03067319.2022.2052865

A feasible 3D printed electrode modified with ZnO nanoparticles for the detection of dopamine
Abdurrahman Taha Gülderen, Gülşah Öztürk, Deniz Ulukuş, Murat Yıldırım and Yasemin Oztekin
Inorganic Chemistry Communications, 2024, 167, 112801
DOI: 10.1016/j.inoche.2024.112801

Eco-Friendly Approach to Making 3D-Printed Electrochemical Sensors
Ricoveer Singh Shergill, Paankhuri Bhatia, Laura Johnstone and Bhavik Anil Patel
ACS Sustainable Chem. Eng., 2024, 12, 416
DOI: 10.1021/acssuschemeng.3c06200

3D-Printed Electrochemical Sensors: A Comprehensive Review of Clinical Analysis Applications
Thaís Cristina de Oliveira Cândido, Daniela Nunes da Silva, Marcella Matos Cordeiro Borges, Thiago Gabry Barbosa, Scarlat Ohanna Dávila da Trindade and Arnaldo César Pereira
Analytica, 2024, 5, 552
DOI: 10.3390/analytica5040037

Advances in additive manufacturing for flexible sensors: bespoke conductive TPU for multianalyte detection in biomedical applications
Ana C.M. Oliveira, Elena Bernalte, Robert D. Crapnell, Matthew J. Whittingham, Rodrigo A.A. Muñoz and Craig E. Banks
Applied Materials Today, 2025, 42, 102597
DOI: 10.1016/j.apmt.2025.102597

Sustainable silver nanoparticle-enhanced additive manufactured sensor for cadmium (II) sensing in environmental waters
Karen K.L. Augusto, Elena Bernalte, Robert D. Crapnell, Hayley G. Andrews, Orlando Fatibello-Filho and Craig E. Banks
Journal of Environmental Chemical Engineering, 2025, 13, 116446
DOI: 10.1016/j.jece.2025.116446

New route for the production of lab-made composite filaments based on soybean oil, polylactic acid and carbon black nanoparticles, and its application in the additive manufacturing of electrochemical sensors
Luiz R.G. Silva, Lucas Ventosa Bertolim, Jéssica S. Stefano, Juliano A. Bonacin, Eduardo M. Richter, Rodrigo A.A. Munoz and Bruno C. Janegitz
Electrochimica Acta, 2025, 513, 145566
DOI: 10.1016/j.electacta.2024.145566

Electrochemical multiplex immunosensor based on 3D printing for dengue NS1 protein and antibody detection
Thomas A.C. Martins, Gustavo Martins, Maurício A.P. Papi, Luiz Humberto Marcolino-Junior and Márcio F. Bergamini
Sensors and Actuators B: Chemical, 2026, 451, 139321
DOI: 10.1016/j.snb.2025.139321

Polydopamine-treated hierarchical cellulosic fibers as versatile reinforcement of polybutylene succinate biocomposites for electromagnetic shielding
Gonghua Hong, Haitao Cheng, Shuangbao Zhang and Orlando J. Rojas
Carbohydrate Polymers, 2022, 277, 118818
DOI: 10.1016/j.carbpol.2021.118818

A Comparative Study of Conductive 3D Printing Filaments for Electrochemical Sensing Applications Pretreated by Alumina Polishing, Electrochemical Activation, and Electrodeposition of Au Nanoparticles
Shakir Ahmed, Enock G. Arthur, Tanner Obrzut, Ricoveer Shergill, Alexa Williams, Kelvin Wamalwa, Zackary D. Epright, Cameron Darvish, Yousef Khatib, Wanlu Li, Bhavik A. Patel and Glen D. O’Neil
ACS Electrochem., 2025, 1, 2386
DOI: 10.1021/acselectrochem.5c00240

Production of 3D-printed disposable electrochemical sensors for glucose detection using a conductive filament modified with nickel microparticles
Raquel G. Rocha, Rafael M. Cardoso, Priscilla J. Zambiazi, Silvia V.F. Castro, Thiago V.B. Ferraz, Gabriel de O. Aparecido, Juliano A. Bonacin, Rodrigo A.A. Munoz and Eduardo M. Richter
Analytica Chimica Acta, 2020, 1132, 1
DOI: 10.1016/j.aca.2020.07.028

Fabrication of an electrochemical sensor for the rapid and sensitive detection of enrofloxacin in meat samples
Qian Yu, Hua Yang and Yonglin Yang
Food Measure, 2024, 18, 87
DOI: 10.1007/s11694-023-02149-3

The role of electrolysis and enzymatic hydrolysis treatment in the enhancement of the electrochemical properties of 3D-printed carbon black/poly(lactic acid) structures
Adrian Koterwa, Iwona Kaczmarzyk, Szymon Mania, Mateusz Cieslik, Robert Tylingo, Tadeusz Ossowski, Robert Bogdanowicz, Paweł Niedziałkowski and Jacek Ryl
Applied Surface Science, 2022, 574, 151587
DOI: 10.1016/j.apsusc.2021.151587

Electric conductivity measurements employing 3D printed electrodes and cells
F. Vivaldi, T. Sebechlebská, E. Vaněčková, D. Biagini, A. Bonini and V. Kolivoška
Analytica Chimica Acta, 2022, 1203, 339600
DOI: 10.1016/j.aca.2022.339600

Reagentless and sub-minute laser-scribing treatment to produce enhanced disposable electrochemical sensors via additive manufacture
Diego P. Rocha, Vanessa N. Ataide, Abner de Siervo, Josué M. Gonçalves, Rodrigo A.A. Muñoz, Thiago R.L.C. Paixão and Lúcio Angnes
Chemical Engineering Journal, 2021, 425, 130594
DOI: 10.1016/j.cej.2021.130594

3-D Electrodes for Electrochemical Sensors: Review in Different Approaches
Mohamed Abdelkader, Mennatalla Elmanzalawy and Rasa Pauliukaite
IEEE Sensors J., 2022, 22, 23620
DOI: 10.1109/JSEN.2022.3220815

Argon non-thermal plasma jet-activated 3D-printed disposable electrochemical sensor for the determination of methyldopa
Marie Hartmann Farines, Eduardo Constante Martins, Luan Gabriel Baumgarten, João Paulo Winiarski, Edson Roberto Santana, Almir Spinelli, Nito Angelo Debacher and Iolanda Cruz Vieira
Electrochimica Acta, 2025, 517, 145722
DOI: 10.1016/j.electacta.2025.145722

Ergonomic and fully 3D–printed, activated, and modified electrochemical set–up for electroanalytical paracetamol detection
Grzegorz Kowalski, Karolina Kwaczyński and Lukasz Poltorak
Talanta, 2026, 296, 128467
DOI: 10.1016/j.talanta.2025.128467

Production of conductive microfibers based on Polybutylene adipate terephthalate and graphite using a 3D printed electrospinning system and their application as electrochemical dopamine sensor
Daniel C. Souza, Jefferson H.S. Carvalho, Rafaela C. Freitas, Ismael C. Bellettini and Bruno C. Janegitz
Microchemical Journal, 2024, 206, 111520
DOI: 10.1016/j.microc.2024.111520

Advanced 3D-Printed Flexible Composite Electrodes of Diamond, Carbon Nanotubes, and Thermoplastic Polyurethane
Simona Baluchová, Stach van Leeuwen, Baris Kumru and Josephus G. Buijnsters
ACS Appl. Polym. Mater., 2024, 6, 14638
DOI: 10.1021/acsapm.4c02748

Novel disposable and portable 3D-printed electrochemical apparatus for fast and selective screening of 25E-NBOH in forensic samples
Lucas V. de Faria, Anne A. Macedo, Luciano C. Arantes, Tiago A. Matias, David L.O. Ramos, Eduardo M. Richter, Wallans T.P. dos Santos and Rodrigo A.A. Muñoz
Talanta, 2024, 269, 125476
DOI: 10.1016/j.talanta.2023.125476

Conductive recycled PETg additive manufacturing filament for sterilisable electroanalytical healthcare sensors
Jéssica R. Camargo, Robert D. Crapnell, Elena Bernalte, Alexander J. Cunliffe, James Redfern, Bruno C. Janegitz and Craig E. Banks
Applied Materials Today, 2024, 39, 102285
DOI: 10.1016/j.apmt.2024.102285

Additive-manufactured (3D-printed) electrochemical sensors: A critical review
Rafael M. Cardoso, Cristiane Kalinke, Raquel G. Rocha, Pãmyla L. dos Santos, Diego P. Rocha, Paulo R. Oliveira, Bruno C. Janegitz, Juliano A. Bonacin, Eduardo M. Richter and Rodrigo A.A. Munoz
Analytica Chimica Acta, 2020, 1118, 73
DOI: 10.1016/j.aca.2020.03.028

Digital fabrication of 3D printed bismuth sparked sensors for electrochemical sensing
Maria Mertiri, Jan Hrbac, Mamas Prodromidis, Anastasios Economou and Christos Kokkinos
Applied Materials Today, 2024, 39, 102289
DOI: 10.1016/j.apmt.2024.102289

3D printed electrodes design and voltammetric response
William B. Veloso, Thiago R.L.C. Paixão and Gabriel N. Meloni
Electrochimica Acta, 2023, 449, 142166
DOI: 10.1016/j.electacta.2023.142166

CeO2:BaMoO4 nanocomposite based 3D-printed electrodes for electrochemical detection of the dopamine
Ali Akbar Hussaini, Adem Sarilmaz, Faruk Ozel, Mehmet Okan Erdal and Murat Yıldırım
Materials Science in Semiconductor Processing, 2024, 180, 108587
DOI: 10.1016/j.mssp.2024.108587

Tailoring 3D-printed sensor properties with reduced-graphene oxide: improved conductive filaments
Michele V. C. O. Silva, Mayane S. Carvalho, Luiz R. G. Silva, Raquel G. Rocha, Luciana V. Cambraia, Bruno C. Janegitz, Edson Nossol, Rodrigo A. A. Muñoz, Eduardo M. Richter and Jéssica S. Stefano
Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06720-7

Reactive oxygen plasma treatment of 3D-printed carbon electrodes towards high-performance electrochemical sensors
Jian F.S. Pereira, Raquel G. Rocha, Silvia V.F. Castro, Afonso F. João, Pedro H.S. Borges, Diego P. Rocha, Abner de Siervo, Eduardo M. Richter, Edson Nossol, Rogério V. Gelamo and Rodrigo A.A. Muñoz
Sensors and Actuators B: Chemical, 2021, 347, 130651
DOI: 10.1016/j.snb.2021.130651

In situ electrochemical determination of resorcinol using a fully 3D printed apparatus
Jocieli Fabri, Luiz R.G. Silva, Jéssica S. Stefano, Jian F.S. Pereira, Daniel R. Cocco, Rodrigo A.A. Muñoz and Diego P. Rocha
Microchemical Journal, 2023, 191, 108810
DOI: 10.1016/j.microc.2023.108810

Additive manufacturing for electrochemical labs: An overview and tutorial note on the production of cells, electrodes and accessories
Matthew J. Whittingham, Robert D. Crapnell, Emma J. Rothwell, Nicholas J. Hurst and Craig E Banks
Talanta Open, 2021, 4, 100051
DOI: 10.1016/j.talo.2021.100051

Spherical covalent organic framework and gold nanoparticles modified 3D-printed nanocarbon electrode for the sensor of acetaminophen
Honglin Yang, Xuemei Dai, Meifang Liao, Jing Ou, Yaxin Yang, Meijun Wan, Jingqiu Zhou and Lujun Wang
Microchemical Journal, 2023, 189, 108547
DOI: 10.1016/j.microc.2023.108547

Flow-through analytical systems and microsystems with electrochemical detection for monitoring of biologically active species (IUPAC Technical Report)
Ján Labuda, Craig E. Banks, Jiří Barek, Alberto Escarpa, Annemieke Farenhorst, Jiří Kudr, Frank-Michael Matysik, Arben Merkoçi, Ľubomír Švorc, Joseph Wang and Ondřej Zítka
Pure and Applied Chemistry, 2026, 98, 329
DOI: 10.1515/pac-2025-0514

MXene 3D/4D Printing: Ink Formulation and Electrochemical Energy Storage Applications
Shaista Nouseen and Martin Pumera
Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202421987

Electrochemical Oxidation Degradation of Methylene Blue Dye on 3D-Printed Anode Electrodes
Claudia Cirillo, Mariagrazia Iuliano, Muhammad Shahzad, Emanuela Grazia Di Martino, Luca Gallucci, Nicola Funicello, Gerardo Iannone, Salvatore De Pasquale and Maria Sarno
Polymers, 2025, 17, 2499
DOI: 10.3390/polym17182499

How normalisation factors influence the interpretations of 3D-printed sensors for electroanalysis
Aya Abdalla, Fernando Perez, Ana Tendero Cañadas, Santanu Ray and Bhavik Anil Patel
Journal of Electroanalytical Chemistry, 2021, 881, 114937
DOI: 10.1016/j.jelechem.2020.114937

Green Fabrication and Analytical Application of Disposable Carbon Electrodes Made from Fallen Tree Leaves Using a CO2 Laser
Rodrigo Vieira Blasques, Jéssica Rocha Camargo, William Barros Veloso, Gabriel Negrão Meloni, Fernando Amaral Fernandes, Beatriz Fernandes Germinare, Luiz Ricardo Guterres e Silva, Abner de Siervo, Thiago Regis Longo Cesar Paixão and Bruno Campos Janegitz
ACS Sustainable Chem. Eng., 2024, 12, 3061
DOI: 10.1021/acssuschemeng.3c06526

Electrochemical synthesis of Prussian blue from iron impurities in 3D-printed graphene electrodes: Amperometric sensing platform for hydrogen peroxide
Raquel G. Rocha, Jessica S. Stefano, Rafael M. Cardoso, Priscilla J. Zambiazi, Juliano A. Bonacin, Eduardo M. Richter and Rodrigo A.A. Munoz
Talanta, 2020, 219, 121289
DOI: 10.1016/j.talanta.2020.121289

Influence of filament aging and conductive additive in 3D printed sensors
Cristiane Kalinke, Paulo Roberto de Oliveira, Naile Vacilotto Neumsteir, Brunna Ferri Henriques, Gabriel de Oliveira Aparecido, Hugo Campos Loureiro, Bruno Campos Janegitz and Juliano Alves Bonacin
Analytica Chimica Acta, 2022, 1191, 339228
DOI: 10.1016/j.aca.2021.339228

Cost-effective fully 3D-printed on-drop electrochemical sensor based on carbon black/polylactic acid: a comparative study with screen-printed sensors in food analysis
Olga Monago-Maraña, Nadia Aouladtayib-Boulakjar, Antonio Zapardiel-Palenzuela, Amabel García, Jorge Ayllón, Álvaro Rodríguez-Prieto, Juan Claver, Ana María Camacho and Agustín G. Crevillén
Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06604-w

Portable Atmospheric Air Plasma Jet Pen for the Surface Treatment of Three-Dimensionally (3D)-Printed Electrodes
Gilvana P. Siqueira, Raquel G. Rocha, Amanda B. Nascimento, Eduardo M. Richter and Rodrigo A. A. Muñoz
Anal. Chem., 2024, 96, 15852
DOI: 10.1021/acs.analchem.4c02785

Laser‐Engraved Print Beds for Creating Bespoke Surface Architectures on Additive Manufactured Electrodes
Muhzamil A. Khan, Elena Bernalte, Matthew J. Whittingham, Lilian Slimani, Karen K. L. Augusto, Robert D. Crapnell and Craig E. Banks
ChemElectroChem, 2025, 12
DOI: 10.1002/celc.202500234

Cost-Effective 3D-Printed-Enabled Fluidic Electrochemical Sensing Platform for Quantitative Electroanalytical Applications
Jesús E. Contreras-Naranjo, Victor H. Perez-Gonzalez, Marco A. Mata-Gómez and Oscar Aguilar
J. Electrochem. Soc., 2021, 168, 117504
DOI: 10.1149/1945-7111/ac3311

Optimised graphite/carbon black loading of recycled PLA for the production of low-cost conductive filament and its application to the detection of β-estradiol in environmental samples
Karen K. L. Augusto, Robert D. Crapnell, Elena Bernalte, Sabri Zighed, Anbuchselvan Ehamparanathan, Jessica L. Pimlott, Hayley G. Andrews, Matthew J. Whittingham, Samuel J. Rowley-Neale, Orlando Fatibello-Filho and Craig E. Banks
Microchim Acta, 2024, 191
DOI: 10.1007/s00604-024-06445-7

Toward a Disruptive “Click-and-Run” 3D Printing Concept for Manufacturing Epidermal Wearable Electrochemical Sensors
Daniel Rojas, María Cuartero and Gastón A. Crespo
ACS Sens., 2025, 10, 7183
DOI: 10.1021/acssensors.5c00682

Advances in Designing 3D‐Printed Systems for CO2 Reduction
Akshay Kumar K. Padinjareveetil and Martin Pumera
Adv Materials Inter, 2023, 10
DOI: 10.1002/admi.202201734

3D-Printed Immunosensor Arrays for Cancer Diagnostics
Mohamed Sharafeldin, Karteek Kadimisetty, Ketki S. Bhalerao, Tianqi Chen and James F. Rusling
Sensors, 2020, 20, 4514
DOI: 10.3390/s20164514

Carbon Black Integrated Polylactic Acid Electrodes Obtained by Fused Deposition Modeling: A Powerful Tool for Sensing of Sulfanilamide Residues in Honey Samples
Raquel G. Rocha, Lucas V. de Faria, Vanessa F. Silva, Rodrigo A. A. Muñoz and Eduardo M. Richter
J. Agric. Food Chem., 2023, 71, 3060
DOI: 10.1021/acs.jafc.2c07814

Treatment rather than pretreatment: Electrochemical activation of electrodes for electroanalysis
Yitao Lv, Ningxia Yang, Minghui You, Jinhua Hao, Juxiu Li and Min Zhang
Microchemical Journal, 2025, 215, 114422
DOI: 10.1016/j.microc.2025.114422

Piezoresistive Properties of 3D-Printed Polylactic Acid (PLA) Nanocomposites
Razieh Hashemi Sanatgar, Aurélie Cayla, Jinping Guan, Guoqiang Chen, Vincent Nierstrasz and Christine Campagne
Polymers, 2022, 14, 2981
DOI: 10.3390/polym14152981

Posttreatment of 3D‐printed surfaces for electrochemical applications: A critical review on proposed protocols
Diego P. Rocha, Raquel G. Rocha, Sílvia V. F. Castro, Magno A. G. Trindade, Rodrigo A. A. Munoz, Eduardo M. Richter and Lucio Angnes
Electrochemical Science Adv, 2022, 2
DOI: 10.1002/elsa.202100136

Circular Economy Electrochemistry: Creating Additive Manufacturing Feedstocks for Caffeine Detection from Post-Industrial Coffee Pod Waste
Evelyn Sigley, Cristiane Kalinke, Robert D. Crapnell, Matthew J. Whittingham, Rhys J. Williams, Edmund M. Keefe, Bruno Campos Janegitz, Juliano Alves Bonacin and Craig E. Banks
ACS Sustainable Chem. Eng., 2023, 11, 2978
DOI: 10.1021/acssuschemeng.2c06514

Additive manufacturing electrochemistry: An overview of producing bespoke conductive additive manufacturing filaments
Robert D. Crapnell, Cristiane Kalinke, Luiz Ricardo G. Silva, Jéssica S. Stefano, Rhys J. Williams, Rodrigo Alejandro Abarza Munoz, Juliano A. Bonacin, Bruno C. Janegitz and Craig E. Banks
Materials Today, 2023, 71, 73
DOI: 10.1016/j.mattod.2023.11.002

3D-printed holder for drawing highly reproducible pencil-on-paper electrochemical devices
Lucas C. Faustino, João P. C. Cunha, Welter Cantanhêde, Lauro T. Kubota and Everson T. S. Gerôncio
Microchim Acta, 2023, 190
DOI: 10.1007/s00604-023-05920-x

3D-printed multiplex system for electrochemical determination of yellow fever antigens and antibodies
Marcia G.P. Valenga, Gustavo Martins, Thomas A.C. Martins, Bruna L.A.M. Lopes, Maria K. Ramos, Aldo J.G. Zarbin, Luiz H. Marcolino-Junior and Márcio F. Bergamini
Biosensors and Bioelectronics, 2025, 290, 117971
DOI: 10.1016/j.bios.2025.117971

Novel trends in poly (lactic) acid hybrid bionanocomposites
Christopher Igwe Idumah, Joseph T. Nwabanne and Faisal A. Tanjung
Cleaner Materials, 2021, 2, 100022
DOI: 10.1016/j.clema.2021.100022

Circular Economy Electrochemistry: Recycling Old Mixed Material Additively Manufactured Sensors into New Electroanalytical Sensing Platforms
Robert D. Crapnell, Evelyn Sigley, Rhys J. Williams, Tom Brine, Alejandro Garcia-Miranda Ferrari, Cristiane Kalinke, Bruno C. Janegitz, Juliano A. Bonacin and Craig E. Banks
ACS Sustainable Chem. Eng., 2023, 11, 9183
DOI: 10.1021/acssuschemeng.3c02052

Sensitive Voltammetric Detection of Chloroquine Drug by Applying a Boron-Doped Diamond Electrode
Geiser Gabriel Oliveira, Déborah Christine Azzi, Tiago Almeida Silva, Paulo Roberto de Oliveira, Orlando Fatibello-Filho and Bruno Campos Janegitz
C, 2020, 6, 75
DOI: 10.3390/c6040075

New conductive filament ready-to-use for 3D-printing electrochemical (bio)sensors: Towards the detection of SARS-CoV-2
Jéssica Santos Stefano, Luiz Ricardo Guterres e Silva, Raquel Gomes Rocha, Laís Canniatti Brazaca, Eduardo Mathias Richter, Rodrigo Alejandro Abarza Muñoz and Bruno Campos Janegitz
Analytica Chimica Acta, 2022, 1191, 339372
DOI: 10.1016/j.aca.2021.339372

Indirect determination of trace concentrations of amoxicillin in environmental samples using a low-cost, disposable additively manufactured sensor
Anastácio A. Boane, Raquel G. Rocha, Rodrigo A.A. Muñoz, André L. dos Santos and Eduardo M. Richter
Electrochimica Acta, 2025, 526, 146175
DOI: 10.1016/j.electacta.2025.146175

Cost-Effective Electrodes for Dopamine Monitoring Based On 3D-Printed Support Combined with Composite Material
Wallace B. V. de Oliveira, Thalles P. Lisboa, Cassiano C. de Souza, Guilherme F. Alves, Raylla S. Oliveira, Maria A. C. Matos and Renato C. Matos
J. Electrochem. Soc., 2023, 170, 027508
DOI: 10.1149/1945-7111/acbac3

Conductive printable electrodes tuned by boron-doped nanodiamond foil additives for nitroexplosive detection
Anna Dettlaff, Michał Rycewicz, Mateusz Ficek, Aleksandra Wieloszyńska, Mateusz Szala, Jacek Ryl and Robert Bogdanowicz
Microchim Acta, 2022, 189
DOI: 10.1007/s00604-022-05371-w

Influence of Surface Treatments on the Electrochemical Performance of Lab-Made 3D-Printed Electrodes
Thiago Gabry Barbosa, Daniela Nunes da Silva, Marcella Matos Cordeiro Borges, Scarlat Ohanna Dávila da Trindade, Thaís Cristina de Oliveira Cândido and Arnaldo César Pereira
Analytica, 2025, 6, 9
DOI: 10.3390/analytica6010009

Fabrication of non-enzymatic and highly sensitive electrochemical ascorbic acid sensor based on GO/Ag/PMMA nanocomposites
Noor Saeed Khattak, Latafat Ara, Luqman Ali Shah, Rizwan Ullah and Tanzil Ur Rehman
Inorganic Chemistry Communications, 2024, 170, 113386
DOI: 10.1016/j.inoche.2024.113386

3D-printed electrodes and electrochemical cell for sulfamethoxazole quantification
Mateus Veras Pereira, Wilfredo Fernando Roque Villanueva, Evandro Datti, Wilson S. Fernandes-Junior, Bruno Campos Janegitz and Juliano Alves Bonacin
Materials Science and Engineering: B, 2026, 327, 119214
DOI: 10.1016/j.mseb.2026.119214

Simultaneous monitoring of amoxicillin and paracetamol in synthetic biological fluids using a 3D printed disposable electrode with a lab-made conductive filament
Thalles Pedrosa Lisboa, Lucas Vinícius de Faria, Wallace Burger Veríssimo de Oliveira, Raylla Santos Oliveira, Cassiano Cunha de Souza, Maria Auxiliadora Costa Matos, Rafael Machado Dornellas and Renato Camargo Matos
Anal Bioanal Chem, 2024, 416, 215
DOI: 10.1007/s00216-023-05009-7

Challenges faced with 3D-printed electrochemical sensors in analytical applications
Lauro A. Pradela‑Filho, Diele A. G. Araújo, Vanessa N. Ataide, Gabriel N. Meloni and Thiago R. L. C. Paixão
Anal Bioanal Chem, 2024, 416, 4679
DOI: 10.1007/s00216-024-05308-7

3D printed electrochemical devices for bio-chemical sensing: A review
Abhinav Sharma, Hendrik Faber, Ajit Khosla and Thomas D. Anthopoulos
Materials Science and Engineering: R: Reports, 2023, 156, 100754
DOI: 10.1016/j.mser.2023.100754

Prussian blue nanoparticles anchored on activated 3D printed sensor for the detection of -cysteine
Cristiane Kalinke, Paulo Roberto de Oliveira, Bruno Campos Janegitz and Juliano Alves Bonacin
Sensors and Actuators B: Chemical, 2022, 362, 131797
DOI: 10.1016/j.snb.2022.131797

Computational and Theoretical Methods for Mass-Transport Analysis in 3D-Printed Milli Fluidic Electrochemical Devices with Channel Band Electrodes
Jesús E. Contreras-Naranjo, Victor H. Perez-Gonzalez, Marco A. Mata-Gómez and Oscar Aguilar
Chemosensors, 2025, 13, 401
DOI: 10.3390/chemosensors13110401

Polyoxometalate‐Enhanced 3D‐Printed Supercapacitors
Mario Palacios‐Corella, Kalyan Ghosh, Edurne Redondo and Martin Pumera
ChemSusChem, 2022, 15
DOI: 10.1002/cssc.202201490

Surface modified 3D printed carbon bioelectrodes for glucose/O2 enzymatic biofuel cell: Comparison and optimization
Jayapiriya U.S. and Sanket Goel
Sustainable Energy Technologies and Assessments, 2020, 42, 100811
DOI: 10.1016/j.seta.2020.100811

Wearable Electronic Finger for Date Rape Drugs Screening: From “Do-It-Yourself” Fabrication to Self-Testing
Georgia Poulladofonou, Christiforos Freris, Anastasios Economou and Christos Kokkinos
Anal. Chem., 2022, 94, 4087
DOI: 10.1021/acs.analchem.2c00015

Ready-to-use 3D-printed electrochemical cell for in situ voltammetry of immobilized microparticles and Raman spectroscopy
Géssica Domingos da Silveira, Reverson Fernandes Quero, Lucas Paines Bressan, Juliano Alves Bonacin, Dosil Pereira de Jesus and José Alberto Fracassi da Silva
Analytica Chimica Acta, 2021, 1141, 57
DOI: 10.1016/j.aca.2020.10.023

Additive Manufacturing as a Means of Gas Sensor Development for Battery Health Monitoring
Oleg Lupan, Helge Krüger, Leonard Siebert, Nicolai Ababii, Niklas Kohlmann, Artur Buzdugan, Mani Bodduluri, Nicolae Magariu, Maik-Ivo Terasa, Thomas Strunskus, Lorenz Kienle, Rainer Adelung and Sandra Hansen
Chemosensors, 2021, 9, 252
DOI: 10.3390/chemosensors9090252

Sustainable Printed Electrochemical Platforms for Greener Analytics
Patrick Severin Sfragano, Serena Laschi and Ilaria Palchetti
Front. Chem., 2020, 8
DOI: 10.3389/fchem.2020.00644

3D-printing in forensic electrochemistry: Atropine determination in beverages using an additively manufactured graphene-polylactic acid electrode
Afonso F. João, Raquel G. Rocha, Tiago A. Matias, Eduardo M. Richter, João Flávio S. Petruci and Rodrigo A.A. Muñoz
Microchemical Journal, 2021, 167, 106324
DOI: 10.1016/j.microc.2021.106324

Advance Nanocomposites from Biopolymers and Fillers: Sources, Characterization, and End-Use Applications
Solomon Oluwaseun Akinnawo
Polymer-Plastics Technology and Materials, 2024, 63, 570
DOI: 10.1080/25740881.2023.2296659

Electrochemical Characterization of Neurotransmitters in a Single Submicron Droplet
Heekyung Park and Jun Hui Park
Biosensors, 2024, 14, 102
DOI: 10.3390/bios14020102

Applicability of Selected 3D Printing Materials in Electrochemistry
Marta Choińska, Vojtěch Hrdlička, Hana Dejmková, Jan Fischer, Luděk Míka, Eva Vaněčková, Viliam Kolivoška and Tomáš Navrátil
Biosensors, 2022, 12, 308
DOI: 10.3390/bios12050308

Preprinting Saponification of Carbon Thermoplastic Filaments Provides Ready-to-Use Electrochemical Sensors
Ricoveer Singh Shergill and Bhavik Anil Patel
ACS Appl. Electron. Mater., 2023, 5, 5120
DOI: 10.1021/acsaelm.3c00862

Processing–property relationships in 3D printed PLA/graphene composites for synergistic enhancement of mechanical strength and electrical conductivity
Kashif Ishfaq, Muhammad Harris, Saravana Kumar Murugesan, Muhammad Salman Habib, Mehran Ullah, Saqib Anwar and Abdullah Yahia AlFaify
Journal of Materials Research and Technology, 2026, 40, 2543
DOI: 10.1016/j.jmrt.2025.12.269

3D-printed electrochemical sensors: A new horizon for measurement of biomolecules
Aya Abdalla and Bhavik Anil Patel
Current Opinion in Electrochemistry, 2020, 20, 78
DOI: 10.1016/j.coelec.2020.04.009

3D Printed Electrochemical Sensors
Aya Abdalla and Bhavik Anil Patel
Annual Rev. Anal. Chem., 2021, 14, 47
DOI: 10.1146/annurev-anchem-091120-093659

Innovation in potentiometry: 3D-printed polylactic acid-based ion-selective bulk electrode membranes
Ádám Golcs, Brúnó Vermes, David Christopher Siwek, Péter Huszthy and Tünde Tóth
J Appl Electrochem, 2022, 52, 1369
DOI: 10.1007/s10800-022-01706-w

A novel method for improving the electrochemical properties by modifying conductive polymer on 3D printed nanocarbon electrode
Meifang Liao, Yaxin Yang, Jing Ou, Honglin Yang, Xuemei Dai, Lian Zhong, Jie Wen, Yanyu Jiang and Lujun Wang
Electrochemistry Communications, 2024, 165, 107754
DOI: 10.1016/j.elecom.2024.107754

Recent developments in electrochemical sensors based on graphene for bioanalytical applications
Abdulazeez Tunbosun Lawal
Sensing and Bio-Sensing Research, 2023, 41, 100571
DOI: 10.1016/j.sbsr.2023.100571

Conductive filament of carbon black and multi-walled carbon nanotubes in polylactic acid for electrochemical detection of sulfamethoxazole and sulfadiazine
Wilson S. Fernandes-Junior, Luiz O. Orzari, Mateus V. Pereira, Vinicius A.O.P. Silva, Jéssica S. Stefano, Juliano A. Bonacin and Bruno C. Janegitz
Microchemical Journal, 2026, 222, 117215
DOI: 10.1016/j.microc.2026.117215

A “two-step” assay based on electro-activation for rapid determination of methylglyoxal in honey and beer
Chaoqi Wang, Yitao Lv, Xueyin Hu, Zhifei Chen, Juxiu Li and Min Zhang
Analytica Chimica Acta, 2022, 1203, 339688
DOI: 10.1016/j.aca.2022.339688

Multi-material integrated 3D-printed electrochemical detection platform for rapid on-site screening of nimesulide in industrial sewage
Mateusz Cieślik, Magdalena Rucka, Gilvana P. Siqueira, Adrian Koterwa, Michał Rycewicz, Rodrigo A. A. Muñoz, Robert Bogdanowicz and Jacek Ryl
Microchim Acta, 2025, 192
DOI: 10.1007/s00604-025-07634-8

Strategies, advances, and challenges associated with the use of graphene-based nanocomposites for electrochemical biosensors
Y. Veera Manohara Reddy, Jae Hwan Shin, Venkata Narayana Palakollu, Bathinapatla Sravani, Chang-Hyung Choi, Kyeongsoon Park, Sun-Ki Kim, G. Madhavi, Jong Pil Park and Nagaraj P. Shetti
Advances in Colloid and Interface Science, 2022, 304, 102664
DOI: 10.1016/j.cis.2022.102664

Upcycling Hospital Lab Polypropylene Waste into a Fully Integrated Additive Manufacturing Electroanalytical Sensing Platforms
Muhzamil A. Khan, Elena Bernalte, Danielle Stephens, Robert D. Crapnell and Craig E. Banks
ACS Sustainable Resour. Manage., 2025, 2, 2302
DOI: 10.1021/acssusresmgt.5c00393

Biochar doped recycled PLA for carbendazim detection in environmental water using additive manufactured electrodes
Elena Bernalte, Robert D. Crapnell, Ana C.M. Oliveira, Milo Fougerol, Karen K.L. Augusto, Muhzamil Khan, Christian Wurzer, Ondrej Masek, Pankaj Singla, Marloes Peeters, Anjali Jayakumar, Rodrigo A.A. Muñoz and Craig E. Banks
Materials Today Communications, 2025, 47, 113287
DOI: 10.1016/j.mtcomm.2025.113287

Chiral 3D‐printed Bioelectrodes
Jose Muñoz, Edurne Redondo and Martin Pumera
Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202010608

3D Printing Temperature Tailors Electrical and Electrochemical Properties through Changing Inner Distribution of Graphite/Polymer
Christian Iffelsberger, Cameron W. Jellett and Martin Pumera
Small, 2021, 17
DOI: 10.1002/smll.202101233

Lab-made 3D printed electrochemical sensors coupled with chemometrics for Brazilian coffee authentication
Yhan S. Mutz, Denes do Rosario, Luiz R.G. Silva, Diego Galvan, Jéssica S. Stefano, Bruno C. Janegitz, David A. Weitz, Patricia C. Bernardes and Carlos A. Conte-Junior
Food Chemistry, 2023, 403, 134411
DOI: 10.1016/j.foodchem.2022.134411

Investigating the surface activation of 3D-printed electrodes for the electrochemical detection of midazolam
Júlio C.O. Faria, Amanda B. Nascimento, Maria M.C. Souza, Raquel G. Rocha, Robert D. Crapnell, Craig E. Banks, Eduardo M. Richter and Rodrigo A.A. Muñoz
Journal of Electroanalytical Chemistry, 2026, 1012, 120093
DOI: 10.1016/j.jelechem.2026.120093

Gold nanoparticle infused castor oil for the production of high performance conductive additive manufacturing filament
Elena Bernalte, Robert D. Crapnell, Rania El Azizi, Karen K.L. Augusto and Craig E. Banks
Applied Materials Today, 2025, 42, 102578
DOI: 10.1016/j.apmt.2024.102578

Activation of additively manufactured electrodes using methanol and ethanol solutions
Rhys J. Williams, Robert D. Crapnell, Tom Brine and Craig E. Banks
Electroanalysis, 2024, 36
DOI: 10.1002/elan.202400075

3D Printable Multifunctional Electrochemical Nano‐Doped Biofilament
Eleni Koukouviti, Anastasios Economou and Christos Kokkinos
Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202402094

3D‐Printed Electrodes Based on Polylactic Acid and Carbonaceous Materials for Electrochemical Sensors and Biosensors: Fabrication and Surface Activation via Chemical, Electrochemical, and Laser/Plasma Methods
Leonan dos Santos Rodrigues, Guilherme Sales da Rocha, Franccesca Fornasier, Raquel Ferreira Matos, João Victor Nicolini and Helen Conceição Ferraz
Electroanalysis, 2025, 37
DOI: 10.1002/elan.70020

Carbon-based electrochemical sensor: Modified electrodes and as-prepared 3D printed electrodes for simultaneous detection of purines and pyrimidines
Bo Zhao, Zhencheng Chen, Guo-Cheng Han, Xiao-Zhen Feng and Heinz-Bernhard Kraatz
Microchemical Journal, 2024, 197, 109894
DOI: 10.1016/j.microc.2024.109894