Supported gold catalysts prepared by using nano-sized gold particles dispersed in nylon-11 oligomer

(Note: The full text of this document is currently only available in the PDF Version )

Koichi Sayo, Shigehito Deki and Shigehiko Hayashi


Abstract

Gold catalysts supported on titanium oxide (TiO2) have been prepared by using nano-sized gold particle/nylon-11 oligomer composites. The composite was prepared through vapor-deposition of gold onto a nylon-11 oligomer film followed by heat treatment. The gold particles/nylon-11 oligomer composite in solution was adsorbed rapidly on the surface of TiO2. When the gold particles/nylon-11 oligomer composite adsorbed on TiO2 was calcined at various temperatures in air, nano-sized gold particles were supported directly on the surface of TiO2 without coagulation. The catalytic activity of the gold particles for oxidation of CO was measured in a flow type reactor. The catalytic activity of gold supported on TiO2 prepared by a one-stage calcination was not so high as that of gold catalysts reported previously. This result was considered to be due to growth of the size of the gold particles during calcination. When the calcination was carried out in two stages (the first at 500[thin space (1/6-em)]°C in vacuum, and the second at 400[thin space (1/6-em)]°C in air), the growth of the size of the gold particles was suppressed considerably. The supported gold catalyst thus obtained showed very high activity for the oxidation of CO, with a temperature of –10[thin space (1/6-em)]°C for 50% conversion of CO.


References

  1. J. van de Loosdrecht, A. M. van der Kraan, A. J. van Dillen and J. W. Geus, Catal. Lett., 1996, 41, 27 CAS.
  2. M. Haruta, N. Yamada, T. Kobayashi and S. Iijima, J. Catal., 1989, 115, 301 CrossRef CAS.
  3. S. D. Gardner, G. B. Hoflund, B. T. Upchurch, D. R. Schryer, E. J. Kielin and J. Schryer, J. Catal., 1991, 129, 114 CrossRef CAS.
  4. S. D. Lin, M. Bollinger and M. A. Vannice, Catal. Lett., 1993, 17, 245 CrossRef CAS.
  5. N. Funazaki, Y. Asano, S. Yamashita, T. Kobayashi and M. Haruta, Proc. 4th Int. Meeting on Chemical Sensors, Tokyo, September 13–17, 1992, Elsevier Sequoia, Lausanne, 1993, p. 536 Search PubMed.
  6. M. Haruta, T. Takase, T. Kobayashi and S. Tsubota, in Catalytic Science and Technology, Kodansha, Tokyo, 1991, vol. 1, p. 331 Search PubMed.
  7. Y. Takasu, X. G. Zhang, S. Minoura and Y. Murakami, Appl. Surf. Sci., 1997, 121/122, 596 CrossRef.
  8. S. J. Tauster, S. C. Fung and R. L. Garten, J. Am. Chem. Soc., 1978, 100, 170 CrossRef CAS.
  9. M. Haruta, S. Tsubota, T. Kobayashi, H. Kageyama, M. J. Genet and B. Delmon, J. Catal., 1993, 144, 175 CrossRef CAS.
  10. Y. Yuan, A. P. Kozlova, K. Asakura, H. Wan, K. Tsai and Y. Iwasawa, J. Catal., 1997, 170, 191 CrossRef CAS.
  11. T. Noguchi, K. Gotoh, Y. Yamaguchi and S. Deki, J. Mater. Sci. Lett., 1991, 10, 477 CrossRef CAS.
  12. K. Akamatsu and S. Deki, J. Mater. Chem., 1997, 7, 1773 RSC.
  13. K. Sayo, S. Deki and S. Hayashi, Int. J. Adhes. Adhes., in the press Search PubMed.
  14. G. R. Bamwenda, S. Tsubota, T. Kobayashi and M. Haruta, J. Photochem. Photobiol. A, 1994, 77, 59 CrossRef CAS.
  15. D. A. H. Cunningham, W. Vogel, H. Kageyama, S. Tsubota and M. Haruta, J. Catal., 1998, 177, 1 CrossRef CAS.
Click here to see how this site uses Cookies. View our privacy policy here.