Issue 33, 2022

Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation

Abstract

Inorganic halide perovskite materials are widely used to make efficient solar cells; however, they have a number of stability issues. Furthermore, due to the inadequate spatiotemporal resolution in experimental tests, the impact of mechanical-load and temperature-induced stresses on the degradation mechanism of halide perovskite materials is poorly understood. Here, we investigate the effect of mechanical and temperature-induced stresses on the degradation of the cubic (α) perovskite CsPbI3 using reactive molecular dynamics. As per the detailed investigation, major structural degradation of α-CsPbI3 was observed at around a temperature of T = 850 K. As a result, we evaluated the structural stability and subsequent relaxation over a wide range of temperatures (T = 300 K to 800 K) and external loads (Fz = 0.007 pN to 35 pN) applied along the z-axis. The number of dissociating bonds (ξ) in the structure is calculated to be in the following order at Fz = 1.74 pN and T = 300 K: ξ(Pb—I,Pb–Pb) > ξ(Cs–Cs,I–I,Cs–Pb) > ξ(Cs–I). Furthermore, the ξ value of these bonds is found to be in inverse order with temperature. Moreover, it shows a saw-tooth or stick-slip pattern during bond dissociation at T = 300 K and low pulling force (<0.07 pN). It is also observed that the impact of applied force along the z-axis differs from that along the x-axis. We also investigated the bond dissociation and formation of all connected bonds over a wide range of applied forces and temperatures, as well as the subsequent relaxation process, to better understand the feasibility of restoring the perovskite structure of degraded products. The data show that, during the relaxation of the applied force and at high temperatures, the dissociated atoms of the structure aggregate and the degraded products are unable to reform the perovskite structure. We anticipate that our findings will help researchers better grasp the stability of perovskite materials under external-load and temperature-driven stresses.

Graphical abstract: Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation

Supplementary files

Article information

Article type
Paper
Submitted
02 jun. 2022
Accepted
28 jul. 2022
First published
29 jul. 2022

J. Mater. Chem. C, 2022,10, 12091-12105

Mechanical-load and temperature-engendered degradation of α-CsPbI3: reactive molecular dynamics simulation

S. Kumar, T. Mishra and R. K. Sahu, J. Mater. Chem. C, 2022, 10, 12091 DOI: 10.1039/D2TC02298B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements