Issue 21, 2024

Surface passivation with an electron-donating sulfonate group for high-performance and stable perovskite solar cells

Abstract

Perovskite solar cells (PSCs) have gained significant attention due to their potential for high power conversion efficiency (PCE). However, the presence of surface traps has hindered further improvements in their performance and stability. To address this issue, a post-annealing treatment with functional molecules has emerged as an effective method for mitigating trap-mediated non-radiative recombination. Herein, 4-aminophenyl sulfone (APS), containing a Lewis base group (S[double bond, length as m-dash]O), could interact with uncoordinated Pb2+ on the perovskite surface, which not only reduces trap state density but also induces a more p-type surface of the perovskite film. As a result of the APS modification, the device achieved a higher PCE of 23.03%, compared to a pristine device of 21.26%, and the values of open-current voltage (VOC), short-circuit current density (JSC), and fill factor (FF) were also improved obviously. Moreover, the APS-modified device demonstrated excellent environmental and thermal stability, maintaining 93% and 90% of its initial PCE after 1000 h at a relative humidity of 30% at room temperature and 200 h in an inert environment at 70 °C, respectively.

Graphical abstract: Surface passivation with an electron-donating sulfonate group for high-performance and stable perovskite solar cells

Supplementary files

Article information

Article type
Paper
Submitted
15 feb. 2024
Accepted
24 abr. 2024
First published
25 abr. 2024

J. Mater. Chem. A, 2024,12, 12545-12551

Surface passivation with an electron-donating sulfonate group for high-performance and stable perovskite solar cells

Q. He, Z. Zhang, A. Chen, T. Zhang, X. Chen, X. Bian, G. Xu, T. Chen, S. Pan, J. Yu, G. Lu, J. Li and J. Pan, J. Mater. Chem. A, 2024, 12, 12545 DOI: 10.1039/D4TA01039F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements