Issue 23, 2023

Tailoring the 3D porous structure of conducting PEDOT:PSS gels via ice-templating

Abstract

Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) has been fascinating material scientists for more than 30 years, but still has structural features and new properties to reveal. Mostly developed in thin films, it has been recently processed as a bulk porous material for new electronic applications. However, the formation and control of the porous structure remain to be understood in depth. We used a combination of X-ray scattering, cryo-electron microscopy and X-ray photoelectron spectroscopy techniques to study the self-assembly mechanism of PEDOT:PSS in the dispersion, gel and dried states. We show that unique fibrils form a 3D fibrillar network upon acidification of the dispersion and that ice crystal growth modifies the structure into a honeycomb-like material. Control of the freezing rate (and freezing temperature) and directionality allowed us to produce anisotropic porous samples with tunable channel size (aligned in the longitudinal direction). Finally, the impacts of porosity on the electrical and thermal transport properties were studied at the macroscale (porous bulk samples). A highly porous templated cryogel with a very low thermal conductivity (37 mW m−1 K−1) and apparent electrical conductivity of a few S cm−1 was obtained. Preliminary measurements at the mesoscale (on a single pore wall) showed anisotropy of charge transport.

Graphical abstract: Tailoring the 3D porous structure of conducting PEDOT:PSS gels via ice-templating

Supplementary files

Article information

Article type
Paper
Submitted
29 mar. 2023
Accepted
23 may. 2023
First published
23 may. 2023
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. C, 2023,11, 7802-7816

Tailoring the 3D porous structure of conducting PEDOT:PSS gels via ice-templating

Q. Weinbach, N. Hmili, E. Gottis, G. Fleith, J. Combet, V. Papaefthimiou, V. Malesys, E. Denys, L. Simon, M. Schmutz, A. Carvalho, D. Constantin and L. Biniek, J. Mater. Chem. C, 2023, 11, 7802 DOI: 10.1039/D3TC01110K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements