Issue 14, 2020

Unraveling the effects on lithium-ion cathode performance by cation doping M–Li2CuO2 solid solution samples (M = Mn, Fe and Ni)

Abstract

Cation doping is one of the most dynamic strategies to enhance the electrochemical properties of cathode materials for lithium-ion batteries. Nevertheless, the maximum partial substitution capacity depends on the solubility of each metal ion, and so the formation of impurities is a very common consequence. Thus, the correlation between electrochemical performance and the doping effect is frequently unknown. In this study, the effect of the partial substitution of copper by manganese, iron or nickel in Li2CuO2 is evaluated, as well as the effect on the electrochemical performance of the modified Li2CuO2 samples as lithium ion battery cathode materials. XRD characterization confirmed single phase formation for all samples, and the incorporation of the transition metal in the Li2CuO2 structure was evaluated by XRD profile fitting, EPR and 7Li-NMR. The results showed modifications in intra- and inter-chain interactions, associated with the variations in the Cu–O–Cu bond angle and changes in magnetic order, due to the presence of the doping transition metal. Among all samples, only manganese partial substitution reveals a drastic improvement in the electrochemical stability during the charge/discharge processes even at potentials higher than 3.9 V. It was corroborated that the higher stability is attributed to (i) the increase in the superexchange interactions between the copper sites and manganese, directly modifying lithium diffusivity and electronic conductivity, both inferred from dynamic thermogravimetric analysis for CO2 sorption and conductivity tests, respectively and (ii) the lower propensity to enable O2 evolution during several charge cycles. These results are totally attributed to manganese cation partial substitution, which has a huge impact on the utilization of copper-based materials in real applications.

Graphical abstract: Unraveling the effects on lithium-ion cathode performance by cation doping M–Li2CuO2 solid solution samples (M = Mn, Fe and Ni)

Supplementary files

Article information

Article type
Paper
Submitted
24 ene. 2020
Accepted
27 feb. 2020
First published
27 feb. 2020

Dalton Trans., 2020,49, 4549-4558

Unraveling the effects on lithium-ion cathode performance by cation doping M–Li2CuO2 solid solution samples (M = Mn, Fe and Ni)

M. A. Martínez-Cruz, A. Yañez-Aulestia, G. Ramos-Sánchez, M. Oliver-Tolentino, M. Vera, H. Pfeiffer, D. Ramírez-Rosales and I. González, Dalton Trans., 2020, 49, 4549 DOI: 10.1039/D0DT00273A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements