Issue 8, 2015

Demonstration of highly efficient lithium–sulfur batteries

Abstract

Lithium–sulfur coin cells were tested with the aim of mitigating the issue of polysulfide dissolution. Five approaches were investigated: optimization of the amount of sulfur that can be contained in the sulfur/carbon electrodes, introduction of different forms of carbon additives into the sulfur electrodes, impregnation of sulfur into the pores of high-surface-area carbon via a melting process, addition of high-surface-area TiO2 as a polysulfide-adsorbing agent in the sulfur electrodes, and use of lithium nitrate as an additive in the electrolyte. Among all these approaches, the most effective way to inhibit the shuttle phenomenon and improve the coulombic efficiency of the Li–S battery was the addition of LiNO3 into the electrolyte.

Graphical abstract: Demonstration of highly efficient lithium–sulfur batteries

Article information

Article type
Paper
Submitted
03 dic. 2014
Accepted
15 dic. 2014
First published
20 ene. 2015

J. Mater. Chem. A, 2015,3, 4170-4179

Demonstration of highly efficient lithium–sulfur batteries

R. Xu, J. C. M. Li, J. Lu, K. Amine and I. Belharouak, J. Mater. Chem. A, 2015, 3, 4170 DOI: 10.1039/C4TA06641C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements