Issue 22, 2013

Colour selective organic photodetectors utilizing ketocyanine-cored dendrimers

Abstract

Accurate colour reproduction by image sensors requires four narrow-band absorbing photodetectors (blue, green, yellow and red), and this is generally achieved by using a broadband photodetector and colour filters. We have developed an organic photodetector in which colour selection is achieved by the light-absorbing layer of the detector. The photoactive layer is comprised of a green absorbing ketocyanine dye-cored dendrimer with the dendrons providing solution processability and prevention of aggregation in the solid-state, which can otherwise lead to the broadening of the absorption spectrum. The properties of the photoactive dendrimer were found to be dependent on the attachment point and number of dendrons. The best photodetector contained a bulk heterojunction (BHJ) light-absorbing layer comprised of the dendrimer with two first generation biphenyl-based dendrons attached to the nitrogen atoms of the ketocyanine dye blended with [6,6]-phenyl-C61-butryic acid methyl ester (PC60BM). The photodetector had a Full Width at Half Maximum (FWHM) of the response of 130 nm centred around 500 nm, an External Quantum Efficiency (EQE) of 8.2% at −1 V and the largest rectification ratio (2.7 × 104 at 0 V) so far reported for a green-absorbing organic photodetector. The performance of the photodetector was found to be approaching that required for current machine vision systems.

Graphical abstract: Colour selective organic photodetectors utilizing ketocyanine-cored dendrimers

Supplementary files

Additions and corrections

Article information

Article type
Paper
Submitted
13 mar. 2013
Accepted
09 abr. 2013
First published
22 abr. 2013

J. Mater. Chem. C, 2013,1, 3532-3543

Colour selective organic photodetectors utilizing ketocyanine-cored dendrimers

R. D. Jansen-van Vuuren, A. Pivrikas, A. K. Pandey and P. L. Burn, J. Mater. Chem. C, 2013, 1, 3532 DOI: 10.1039/C3TC30472H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements