Issue 47, 2017

Selective wetting/dewetting for controllable patterning of liquid metal electrodes for all-printed device application

Abstract

Liquid metals based on eutectic gallium–indium (EGaIn) alloys are promising printable electrode materials for various printed devices such as light-emitting diodes or solar cells. To achieve a controllable and fine patterning of the EGaIn electrodes, herein, a facile bottom-up, additive technique has been developed by manipulating wetting/dewetting of the substrate. The substrate is first dewetted by coating a hydrophobic layer; then, to selectively dewet the substrate, the coated hydrophobic layer is patterned by laser ablation. EGaIn, which is painted onto the substrate, can only adhere to the wetting regions and thus can perfectly copy the patterns of the wetting regions. Via this method, high-resolution EGaIn patterns with a line width smaller than 100 μm can be obtained. Using the patterned EGaIn electrodes, all-printed quantum dot light-emitting diodes were successfully demonstrated. The proposed method offers a feasible route for fast patterning of EGaIn and thus allows for inexpensive, rapid fabrication of various devices without the need of costly vacuum processing.

Graphical abstract: Selective wetting/dewetting for controllable patterning of liquid metal electrodes for all-printed device application

Article information

Article type
Paper
Submitted
09 ago. 2017
Accepted
02 oct. 2017
First published
03 oct. 2017

J. Mater. Chem. C, 2017,5, 12378-12383

Selective wetting/dewetting for controllable patterning of liquid metal electrodes for all-printed device application

Y. Jiang, S. Su, H. Peng, H. Sing Kwok, X. Zhou and S. Chen, J. Mater. Chem. C, 2017, 5, 12378 DOI: 10.1039/C7TC03591H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements