Issue 20, 2024

Insights into the application of cerium dioxide nanoparticle-modified cobalt phosphide as an efficient electrocatalyst for high-performance lithium–sulfur batteries

Abstract

Developing high-efficiency catalysts is an effective strategy to boost the hysteretic polysulfide conversion behavior of lithium–sulfur (Li–S) batteries. Cobalt phosphide (CoP) is a typical promising catalyst due to its inherent advantages such as good electron conductivity, facile synthesis route and moderate catalytic capability and binding energy to polysulfide. However, the design and fabrication of highly active CoP remains a challenge. Herein, aiming to optimize the catalytic activity of CoP, the regulation of the electronic structure of CoP by cerium dioxide (CeO2) was explored, and the sulfur conversion capability and the electrochemical performance in Li–S batteries using the obtained CoP/CeO2 nanocomposites were demonstrated. Microstructure analysis demonstrates that CeO2 nanoparticles can embed in CoP and increase its exposed active sites, and the introduced CeO2 can adjust the electronic structure and optimize the charge transfer and polysulfide conversion behavior of CoP. Although DFT indicates a moderate adsorption energy of CoP/CeO2 towards Li2S6, practical catalytic activity depends strictly on the amount of CeO2, and the optimum amount is ∼10 mol%. A Li–S battery with a CoP/CeO2-10-modified separator exhibits a high specific capacity of 1400 mA h g−1 at 0.1C, an excellent rate performance of 722 mA h g−1 at 3C and a long-term cycling durability of 535 mA h g−1 at 1C after 1000 cycles. This work expands the range of CoP-based catalysts based on CeO2 in Li–S batteries.

Graphical abstract: Insights into the application of cerium dioxide nanoparticle-modified cobalt phosphide as an efficient electrocatalyst for high-performance lithium–sulfur batteries

Supplementary files

Article information

Article type
Research Article
Submitted
29 may. 2024
Accepted
26 ago. 2024
First published
28 ago. 2024

Inorg. Chem. Front., 2024,11, 6928-6939

Insights into the application of cerium dioxide nanoparticle-modified cobalt phosphide as an efficient electrocatalyst for high-performance lithium–sulfur batteries

X. Wang, G. Zhang, Y. Li, Y. Wu and W. Luo, Inorg. Chem. Front., 2024, 11, 6928 DOI: 10.1039/D4QI01349B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements