Issue 3, 2022

Formaldehyde gas sensor with extremely high response employing cobalt-doped SnO2 ultrafine nanoparticles

Abstract

Formaldehyde is a common carcinogen in daily life and harmful to health. The detection of formaldehyde by a metal oxide semiconductor gas sensor is an important research direction. In this work, cobalt-doped SnO2 nanoparticles (Co-SnO2 NPs) with typical zero-dimensional structure were synthesized by a simple hydrothermal method. At the optimal temperature, the selectivity and response of 0.5% Co-doped SnO2 to formaldehyde are excellent (for 30 ppm formaldehyde, Ra/Rg = 163 437). Furthermore, the actual minimum detectable concentration of 0.5%Co-SnO2 NPs is as low as 40 ppb, which exceeds the requirements for formaldehyde detection in the World Health Organization (WHO) guidelines. The significant improvement of 0.5%Co-SnO2 NPs gas performance can be attributed to the following aspects: firstly, cobalt doping effectively improves the resistance of SnO2 NPs in the air; moreover, doping creates more defects and oxygen vacancies, which is conducive to the adsorption and desorption of gases. In addition, the crystal size of SnO2 NPs is vastly small and has unique physical and chemical properties of zero-dimensional materials. At the same time, compared with other gases tested, formaldehyde has a strong reducibility, so that it can be selectively detected at a lower temperature.

Graphical abstract: Formaldehyde gas sensor with extremely high response employing cobalt-doped SnO2 ultrafine nanoparticles

Supplementary files

Article information

Article type
Paper
Submitted
13 ago. 2021
Accepted
23 dic. 2021
First published
03 ene. 2022
This article is Open Access
Creative Commons BY-NC license

Nanoscale Adv., 2022,4, 824-836

Formaldehyde gas sensor with extremely high response employing cobalt-doped SnO2 ultrafine nanoparticles

S. Zhou, H. Wang, J. Hu, T. Lv, Q. Rong, Y. Zhang, B. Zi, M. Chen, D. Zhang, J. Wei, J. Zhang and Q. Liu, Nanoscale Adv., 2022, 4, 824 DOI: 10.1039/D1NA00625H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements