Issue 20, 2019

MoS2 versatile spray-coating of 3D electrodes for the hydrogen evolution reaction

Abstract

A facile one-step MoS2 spray-coating method was applied to a range of rigid, flexible, porous and 3D printed carbon-based surfaces, yielding high loadings in MoS2 flakes. The characterization of MoS2 flakes from a commercial lubricant spray reveals up to micron-scale bulk sheets of the layered material, constituted in its majority by the semiconducting 2H polymorph, in the presence of the metallic 1T phase. Consequently, the process generates MoS2 spray-coated surfaces with improved hydrogen evolution reaction (HER) catalytic performance. In the case of carbon-based screen printed electrodes (SPE), a short-term thermal post-treatment of the MoS2 spray-coated SPE had a further beneficial effect in the HER overpotential. The MoS2 spray-coated 3D metallic meshes held the lowest HER overpotential of the series. Finally, MoS2 spray-coated 3D printed electrodes yielded improved heterogeneous charge transfer and a 500 mV shift in the required overpotential at a current density of −10 mA cm−2. The MoS2 spray-coated 3D printed electrode displayed an abundant coverage at the inner, external and planar zones of electrodes by the MoS2 sheets, even after long-term operation conditions. These outcomes can be beneficial for future tailoring of MoS2 spray-coated surfaces and their implementation in energy conversion technologies.

Graphical abstract: MoS2 versatile spray-coating of 3D electrodes for the hydrogen evolution reaction

  • This article is part of the themed collection: Nanocarbons

Supplementary files

Article information

Article type
Paper
Submitted
02 mar. 2019
Accepted
16 abr. 2019
First published
14 may. 2019

Nanoscale, 2019,11, 9888-9895

MoS2 versatile spray-coating of 3D electrodes for the hydrogen evolution reaction

R. Gusmão, Z. Sofer, P. Marvan and M. Pumera, Nanoscale, 2019, 11, 9888 DOI: 10.1039/C9NR01876J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements