Issue 8, 2015

A step towards mobile arsenic measurement for surface waters

Abstract

Surface modified quantum dots (QDs) are studied using a bio-inspired cysteine rich ligand (glutathione, GSH) and their quenching response and selectivity to arsenic examined. As predicted from As3+ binding with highly crosslinked phytochelatin-(PCn)-like molecules, better arsenic selectivity is obtained for a thicker more 3-dimensional GSH surface layer, with exposed sulfhydryl groups. A detection limit of at least 10 μM can be achieved using CdSe/ZnS core–shell QDs capped with this GSH structure. The system is also demonstrated using a mobile phone camera to record the measurement, producing a detection limit of 5 μM. However, copper remains the main interferent of concern. Water-soluble CdTe QDs show little sensitivity to As3+ even with a GSH surface, but they remain sensitive to Cu2+, allowing a copper baseline to be established from the CdTe measurement. Despite anticipating that spectrally non overlapping fluorescence would be required from the two types of QDs to achieve this, a method is demonstrated using RGB channels from a mobile phone and processing the raw data for CdTe QDs, with an emission wavelength of 600 nm, and CdSe/ZnS QDs, with emission maximum of 630 nm. It is shown that As3+ measurement remains feasible at the WHO guideline value of 10 μg L−1 up to a copper concentration of around 0.3 μM Cu2+, which corresponds to the highest recorded level in a selection of large rivers world-wide.

Graphical abstract: A step towards mobile arsenic measurement for surface waters

Article information

Article type
Paper
Submitted
23 dic. 2014
Accepted
18 feb. 2015
First published
25 feb. 2015

Analyst, 2015,140, 2644-2655

Author version available

A step towards mobile arsenic measurement for surface waters

C. A. de Villiers, M. C. Lapsley and E. A. H. Hall, Analyst, 2015, 140, 2644 DOI: 10.1039/C4AN02368D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements