Electro-Driven Fibrous Soft Actuators Towards Flapping-Wing Control for Insect-Scale Robots

Abstract

Flapping-wing control is critical to the development of flapping-wing micro aerial vehicles (FMAVs). Existing electro-driven soft actuators for such applications face challenges in balancing the requirements for low driving voltage and high actuation performance (actuation strain, strain rate, and power density). In this study, electro-driven fibrous soft actuators of liquid crystal elastomer (LCE) have been designed and created, which achieve excellent comprehensive performance: low voltage actuation (<6.4 V), a large actuation strain (a maximum actuation strain of 43%), fast actuation strain rate (up to 1417 % s-1), and high power density (up to 1631 W Kg-1), and wide frequency bandwidth (50 Hz). Furthermore, electro-driven fibrous actuators have mimicked the actuation function of dragonfly direct flight muscles. The flapping frequency, amplitude, and angle of a single wing were precisely controlled by electrical parameters. Moreover, through programmable drive of two LCE fibrous actuators, the flapping phase difference characteristics of the forewings and hindwings of dragonflies under different flight modes were imitated. This work highlights the significant potential of electro-driven LCE fibers as high-performing artificial muscles for the development of biomimetic FMAVs.

Supplementary files

Article information

Article type
Communication
Submitted
19 Oct 2025
Accepted
05 Jan 2026
First published
06 Jan 2026

Mater. Horiz., 2026, Accepted Manuscript

Electro-Driven Fibrous Soft Actuators Towards Flapping-Wing Control for Insect-Scale Robots

R. Song, Y. Fan, W. Hou, Z. Hu, B. Liu, K. Liu and J. Lv, Mater. Horiz., 2026, Accepted Manuscript , DOI: 10.1039/D5MH01982F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements