Comprehensive Monitoring of 222 Pesticide Residues in Iranian Roasted Coffee Beans Using GC-MS/MS

Abstract

In this study, a modified “Quick, Easy, Cheap, Effective, Rugged, and Safe" (QuEChERS) sample preparation method, utilizing Gas Chromatography Tandem Mass Spectrometry (GC-MS/MS), was employed for the simultaneous analysis of 222 pesticides in roasted coffee beans. The range and linearity of calibration curves, as well as the accuracy and intermediate precision, were assessed using spiked samples. Additionally, the Limits of Detection (LOD) and Quantitation (LOQ) were evaluated. The method has been linear in the 0.01-0.1mg/kg range. For most analytes, the mean recovery and Relative Standard Deviation (%RSD) were within the 70-120% range and under 20%, respectively. The mean recovery for all pesticides was 100.92 ± 10.69% at 0.015 mg/kg, 107.61 ± 7.77% at 0.03 mg/kg, and 96.63 ± 9.07% at 0.06 mg/kg. Method validation demonstrated quantification capabilities for 222 analytes, with LOQs of 0.01 mg/kg for 194 pesticides (87.4%), 0.015 mg/kg for 26 compounds (11.7%), and 0.02 mg/kg for the remaining 2 analytes (0.9%). Upon comparing the results with the requirements of SANTE/11312, it is evident that the method meets the necessary criteria to ensure the quality control of real samples. Out of 16 tested real coffee bean samples, three Arabica coffee bean samples contained residues of Flutriafol below the LOQ.

Supplementary files

Article information

Article type
Paper
Submitted
26 Mar 2025
Accepted
22 May 2025
First published
26 May 2025

Anal. Methods, 2025, Accepted Manuscript

Comprehensive Monitoring of 222 Pesticide Residues in Iranian Roasted Coffee Beans Using GC-MS/MS

A. Asadi, S. Goudarzi, S. Pakzad, B. Daraei, Y. A. Firsukova, A. Mousavi Khaneghah and M. Amirahmadi, Anal. Methods, 2025, Accepted Manuscript , DOI: 10.1039/D5AY00508F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements