Recent trends in the applications of thermally expanded graphite for energy storage and sensors – a review

Carbon nanomaterials such as carbon dots (0D), carbon nanotubes (1D), graphene (2D), and graphite (3D) have been exploited as electrode materials for various applications because of their high active surface area, thermal conductivity, high chemical stability and easy availability. In addition, due to the strong affinity between carbon nanomaterials and various catalysts, they can easily form metal carbides (examples: ionic, covalent, interstitial and intermediate transition metal carbides) and also help in the stable dispersion of catalysts on the surface of carbon nanomaterials. Thermally expanded graphite (TEG) is a vermicular-structured carbon material that can be prepared by heating expandable graphite up to 1150 °C using a muffle or tubular furnace. At high temperatures, the thermal expansion of graphite occurred by the intercalation of ions (examples: SO42−, NO3−, Li+, Na+, K+, etc.) and oxidizing agents (examples: ammonium persulfate, H2O2, potassium nitrate, potassium dichromate, potassium permanganate, etc.) which helped in the exfoliation process. Finally, the obtained TEG, an intumescent form of graphite, has been used in the preparation of composite materials with various conducting polymers (examples: epoxy, poly(styrene-co-acrylonitrile), polyaniline, etc.) and metal chlorides (examples: FeCl3, CuCl2, and ZnCl2) for hydrogen storage, thermal energy storage, fuel cells, batteries, supercapacitors, sensors, etc. The main features of TEG include a highly porous structure, very lightweight with an apparent density (0.002–0.02 g cm−3), high mechanical properties (10 MPa), thermal conductivity (25–470 W m−1 K−1), high electrical conductivity (106–108 S cm−1) and low-cost. The porosity and expansion ratio of graphite layers could be customized by controlling the temperature and selection of intercalation ions according to the demand. Recently, TEG based composites prepared with metal oxides, chlorides and polymers have been demonstrated for their use in energy production, energy storage, and electrochemical (bio-) sensors (examples: urea, organic pollutants, Cd2+, Pb2+, etc.). In this review, we have highlighted and summarized the recent developments in TEG-based composites and their potential applications in energy storage, fuel cells and sensors with hand-picked examples.


Introduction
Generally, various electrode materials used in fuel cells, 1 batteries, 2 supercapacitors, 3 and electrochemical sensors 4 may suffer from specic problems such as poor mass transport, easy contamination of the catalyst surface, poor thermal and electrochemical stabilities, loss of activity with time, etc. 5 In order to increase the performance of the devices with longer life, the electrode materials should have high mass transport, easily renewable catalyst surface, high thermal and electrochemical stabilities, high conductivity, high corrosion resistance and good mechanical properties. 5 It is apparent that the performance of the electrode materials could be improved by the addition of functional additives 6 such as activated carbon, carbon black (CB), 7 carbon nanodots, 8 carbon nanotubes (CNTs), 9 graphene 10 and graphite nanoparticles 11 which all enhanced the electrochemical activity of the electrode materials. 12,13 For example, Glebova et al. demonstrated that thermally expanded graphite (TEG) can improve the thermal stability of the Naon membrane for use in fuel cells. 5 Due to Brahmari H. Shetty is currently pursuing her PhD in the Department of Physics at SRM Institute of Science and Technology. She completed her MSc in Materials Science in 2020 and her BSc in 2018 from Mangalore University, Mangalore. Her research focuses on the development of novel electrode materials for the fabrication of anode electrodes for microbial fuel cells, along with the synthesis of novel nanocomposites, electrode design, and evaluation of electrode compatibility with microbial fuel cells.
Dr Mani Govindasamy is a Research Assistant Professor at the Department of Materials Science and Engineering, National Taipei University of Technology (Taipei Tech), Taiwan. Dr M. G. is involved in developing 2D layered materials, 3D nanocomposites, metal-organic frameworks, and nanozymes for sensors, biosensors and energy devices. Monitoring toxic chemicals in food and developing point-of-care devices, multiplexed nanosensors, and non-invasive electrochemical sensing methods are some of his recent research interests. He is serving as an editorial board member for Frontiers in Chemistry (MDPI; I.F 5.2). In 2020, he was included in the world's top 2% scientist list published by Stanford University researchers under the categories of energy and analytical chemistry.
Dr Ashok K. Sundramoorthy is a Research Assistant Professor in the Department of Chemistry, SRM Institute of Science and Technology. He pursued his PhD from National Taipei University of Technology in Taiwan, the fellowship supported by the Ministry of Education, Taiwan Government. He obtained his postdoctoral training at the University of Wisconsin-Madison (USA), Nanyang Technological University (Singapore), and National Taipei University of Technology (Taiwan). He was a visiting assistant professor of the Department of Chemical and Biomolecular Engineering, Nanyang Technological University, Singapore. During his postdoctoral research years, he has made signicant contributions in separating single-walled carbon nanotubes for eld-effect transistors and fabricated chemical and biosensors for environmental, medical, and food safety applications. He had developed different sensors and methods to detect hazardous chemicals, and important biomolecules by using various selective electro-catalytic nanomaterials. His research areas of interest include the development of sensor probes for chemicals, biomolecules, bioelectrochemistry, electrochemical devices, and eld-effect transistors for the analysis of environmental and biological samples. He has published more than 100 scientic papers and obtained three US patents and one Indian patent as an inventor. He has published two books as an editor. His h-index is 32 with total citations of $3000.
the perfect crystalline structure, carbon materials have been synthesized in various dimensions (examples: zero-dimensional (0D), one-dimensional (1D), two-dimensional (2D) and threedimensional (3D)) to improve the electrochemical activity of the composite materials. 14 For comparison purposes, the surface area, electrical and thermal conductivities of CNTs, graphite, TEG, graphene and CB are shown in Table 1. As a promising choice, carbon nanomaterials (0D: carbon dots, 15,16 fullerenes 17 and nanodiamond; 18 1D: single and multi-walled CNTs, 19 carbon nanohorns 20 and graphene nanoribbons; 21 2D: graphene, 22 graphene oxide (GO) 23 and 3D: graphite, 24 TEG, 25 etc.) have been used to provide high chemical stability, large surface-active area, good exibility, thermal conductivity, high electrical conductivity, long-term stability and environmental friendliness with denite geometry. 26 Therefore, the above mentioned carbon materials have been successfully demonstrated in various electrochemical applications. [27][28][29][30] In addition, due to the good affinity between carbon materials and metal catalysts, carbon materials were able to form metal-carbides and uniform dispersion of metal catalysts on the surface of the electrode. 31 Moreover, the usage of noble metal-based catalysts can be reduced by the addition of carbon materials to some extent for cost reduction without affecting the efficiency of the electrode. Generally, carbon black, CNTs, carbon nano-bers and graphene were predominately used in energy-related applications. 32 CNT based composite materials showed excellent conductivity and high thermal and mechanical properties. [33][34][35] But, the usage of CNTs in manufacturing commercial products has still been limited due to some of the existing challenges such as high production cost, limited production capacity, safety, less purity, etc. [36][37][38] As a potential alternative, graphite is readily available at low cost 39 with high corrosion resistance, high thermal and electrical conductivities 40 (Table  1). It can be used as a functional additive in various applications. 41,42 TEG is a vermicular or a worm-like structured non-toxic layered material which exhibits good exibility, high chemical tolerance and excellent thermal shock resistance. 52 (Fig. 1, stage 1). This treated graphite was also known as the graphite intercalation compound (GIC). 57,58 In the second step, the GIC was thermally heated from 300-1150 C to obtain TEG ( Fig. 1, stage 2). So far, the total number of publications reported on TEG was estimated using the keyword "thermally expanded graphite" from the Scopus database (Fig. 2). It is evident that the number of publications on TEG based materials are increasing.
As an example, the expanded layers of TEG are shown in Fig. 3(a-d). Even aer the thermal expansion process, graphite layers were attached to each other by van der Waals forces of attraction. 40,60 Finally, the obtained TEG was used as a re retardant, 61 high-performance gasket, 62 conductive ller, 63 host material for catalyst loading, 64 phase-changing material, 65,66 radiation shield, 67,68 electrode material, 69,70 and foundry product. 71 However, during the synthesis of TEG by acid treatment with metal intercalates, various functional groups (-OH, -COOH, etc.) were also introduced on the TEG surface by the oxidation process. In this way, the obtained TEG exhibited enhanced properties due to the presence of intercalates in between the graphite layers. 41 For example, compared to natural graphite akes, sulfate intercalated TEG showed an increase in the active surface area from 1.5 to 45.5 m 2 g À1 . 80 It is worth noting that during thermal heating of acid treated graphite, intercalates were converted from a solid to a gaseous phase 81 and the gas formation helped in the expansion of graphite layers (an increase in volume was observed). It was also suggested that the pressure generated in between the layers might have increased the distance between adjacent layers to move apart, 82 as shown in Fig. 4(a) and (b). Depending on the intercalation process, various functional groups (amine, imine, carboxyl, hydroxyl, epoxide, and lactone) could be formed on the GIC, which was benecial for establishing a good interface. Later, the presence of these functional groups could bring lattice defects on the expanded TEG and inversely affect the electrical and thermal conductivities of the nanoller.

Effects of the intercalation process on graphite
Generally, the applied temperature and mesh size of the graphite could affect the expansion ratio of the graphite akes. 85 As said earlier, TEG could be synthesized by supplying heat in the presence of selected intercalant compounds. The expansion of layers resulted in crystallographic de-lamination that occurred in parallel to the "c" crystallographic axis of the graphite akes. 86 Elevated temperature causes the expansion agent to vaporize (as CO 2 , SO 2 , and H 2 O) by producing enough pressure to push out the adjacent graphite layers away from each other. As a consequence of the expansion process, a decrease in the bulk density and a 10-fold increase in the surface area were observed for TEG with the enhanced physical and chemical properties. 87 For example, the surface area, density, crystallographic structure, electronic behavior, chemical reactivity, and intumescent nature of TEG have been signicantly improved. 88 The maximum rate of expansion was observed for a specic grade of graphite when exposed at high temperatures in a preheated furnace between 600 and 1200 C. 89 It should be noted that slow heating during the thermal expansion process did not help to expand graphite layers as required because the process of graphite expansion was mainly dependent on the extreme forces created by a rapid gas explosion. 90 In addition, the mesh size of the graphite was directly proportional to the expansion ratio of TEG. For example, the larger graphite akes (10 mesh) showed a higher expansion ratio than smaller akes (325 mesh). This was due to the fast escape of the gas molecules (CO 2 , SO 2 , and H 2 O) and they failed to create the required pressure to expand the adjacent graphene layers. 89 In the case of larger akes, gas molecules could help to expand the layers away from each other. Similarly, the thicker akes can expand more proportionally than the thinner akes. 91 On the other hand, the TEG expansion process could generate more acid wastes and the rate of expansion was uncontrollable during the  synthesis process. Also, a high temperature was necessary to achieve the best expansion of TEG with high product yield.

Preparation of TEG
Two common methods such as (i) thermal assisted expansion and (ii) microwave assisted expansion were reported for the synthesis of TEG (Scheme 1). During the expansion process, three different stages are observed. In stage-I, natural graphite will be oxidized using potassium permanganate (KMnO 4 ), HNO 3 , H 2 O 2 , etc. 92 In this oxidation process, the molecules and ions of sulphuric acid (H 2 SO 4 ) or nitric acid (HNO 3 ) were inserted into the layers of the graphite crystal lattice and is known as the intercalation process. The resultant material is called oxidized graphite. In stage-II, water will be used to remove the excess intercalant ions/compounds by the washing process and then, the sample will be dried to maintain its physical properties such as malleability, microstructure, castability, etc. In the nal stage-III, the oxidized graphite will be heated in a high-temperature reactor to achieve the thermally expanded graphite. When the sample is treated at >600 C, the expansion of graphite layers takes place due to gaseous products formed by the decomposition of H 2 SO 4 or HNO 3 , which helped to separate the adjacent graphite layers. Due to this expansion process, the interlayer distance (from 0.334 nm) between adjacent graphite layers can be increased up to 300 times. 93 Liu et al. 94 synthesized TEG by a one-step room-temperature method which showed an expansion volume up to 225 times. This experiment was carried out using a binary-component system made of ammonium persulfate and concentrated H 2 SO 4 . It was reported that the usage of less quantity of H 2 SO 4 resulted in a worm-like structure by controlled stirring and standing procedures. Hence, this method was found to be efficient to prepare TEG because it required low energy and Step by step synthesis process of TEG: (i) peroxidation, (ii) opening of the layers, (iii) penetration of intercalants and (iv) expansion at high temperature. 84 These images were adapted with permission from ref. 83 and 84 copyright 2020 Elsevier and MDPI.
Scheme 1 Flowchart representation of the synthesis of TEG from graphite. generated less pollutants. During the TEG preparation, various morphological changes were observed, as shown in Fig. 5(a-g).
Çalin et al. 89 studied the relationship between the porous structure and the expansion ratio of TEG by varying the expansion circumstances of graphite with various ake sizes. They found that the graphite ake size had an effect on the expansion ratio of TEG. For example, when graphite akes with a +325 mesh (>44 mm) size range were used to prepare TEG, they obtained a low intercalation rate because of the small size of the akes which led to a poor expansion ratio. Similarly, when TEG was prepared using graphite akes of À10 mesh (<2 mm) size, they observed quite higher expansion ratios at all the temperatures (700, 900, and 1100 C). The graphite akes with À10 mesh size showed a maximum expansion ratio (80 ml g À1 ) at 1150 C. TEG with an expansion ratio of $400 ml g À1 was achieved at 1150 C using commercial expandable graphite (with +50 mesh, >300 mm) in a closed lid crucible ( Table 2).
The closed crucible helped the graphite akes from burning on the surface and their escape during the expansion process. The maximum pore volume was achieved for TEG obtained from +50 mesh expandable graphite than À10 mesh which was conrmed by scanning electron microscopy analysis. The inuence of the graphite particle size was also studied by Dhakate et al. 95 for TEG based composite bipolar plates in polymer electrolyte membrane fuel cells. Four types of graphite akes were taken (30, 50, 150 and 300 mm) and used for the  Review Nanoscale Advances fabrication of composite based bipolar plates with phenolic resin as a polymer matrix. The electrical conductivity of the bipolar plates was 150 S cm À1 , and was found to be high for 300 mm sized graphite akes. However, 30 mm sized graphite ake based composite plates showed high mechanical properties and low electrical conductivity. 95 The above study indicated that the expansion ratio of natural graphite akes depended on their particle sizes. Also, Wang et al. prepared TEG using graphite akes with different mesh sizes (80, 120, 150 and 200) and found that the expansion ratios increased with the mesh size. 45 In a similar manner, TEG was prepared by using a microwave irradiation method which provided TEG with uniform expansion of graphite layers. 96 It was considered as one of the effective methods for the preparation of TEG. Van Pham et al. 97 obtained TEG through a two-step process. First, graphite akes, KMnO 4 , acetic anhydride, and perchloric acid were mixed in a ratio of 1 : 0.5 : 1 : 0.4 (g g À1 ) for a few seconds and the mixture was kept in a microwave oven at 360 W for 50 s to achieve the expansion of graphite sheets. Wei et al. 98 also synthesized TEG using natural graphite with HNO 3 and KMnO 4 as oxidizing agents. The mixture was stirred at room temperature for 3 min. Aer that, the mixture was kept in a microwave oven and irradiated for 60 s at a power rate of 700 W. At this time, exfoliation of the graphite layers was observed with fuming and lightening effects. The worm-like structure of TEG was observed by scanning electron microscopy (SEM) analysis and the surface morphology of TEG exhibited a well exfoliated structure where expansion occurred along the direction of the c-axis.

Role of TEG in nanocomposites
Due to the presence of multiple pores and functional groups such as -COOH and -OH on the TEG surface, it exhibited high physical and chemical properties compared to graphite. 99 For instance, Zheng et al. 100 prepared polymethyl methacrylate and TEG based composites which showed high mechanical (storage modulus of 3.4 GPa and loss modulus of 380 MPa) and electrical (10 À4 S cm À1 ) properties. This was due to the high surface area and conductive nature of TEG which helped to enhance the above properties. During the synthesis of TEG, strong oxidizing agents such as KMnO 4 , HNO 3 , H 2 SO 4 , hydrogen peroxide (H 2 O 2 ) and other intercalating agents (halogens, alkali metals, etc.) have been used. These agents created several oxygen-rich functional groups on the surface of TEG. As a consequence, the resulting TEG with these functional groups with a porous structure helped to interact with various molecules to form the composite materials. 45 In particular, TEG with mesopores (2-50 nm) and macropores (>50 nm) was preferred to decorate with various molecules/compounds. 89,101 Furthermore, due to the unique morphology of TEG, other molecules/ions/compounds/ metals could be easily positioned within the open pores, nano-cavities or at the edges of graphene sheets of TEG which helped to form a uniform distribution of the supporting materials (Fig. 6). 89 By tuning the temperature, duration of thermal treatment, selection of graphite particles with an optimum size and nature of intercalants, the expansion ratio, number of pores, and pore sizes of TEG can be controlled during the synthesis 91 based on the requirements for the relevant applications.
Several studies have been reported on the thermal conductivity and electrochemical properties of TEG. 103,104 TEG has also been used in the preparation of electrochemical sensors, 105 fuel cells, 106,107 batteries 108,109 and supercapacitors. 110,111 In particular, TEG was demonstrated in lithium-ion batteries (LIBs) with good cycling stability up to 100 cycles, and the rst reversible capacity was 401 mA h g À1 . 112 Herein, the stacking arrangement of graphene sheets enhanced the lithium-ion transportation and the electron conductivity of the electrode. Aer 50 cycles, the obtained specic capacity was 381 mA h g À1 and the retention rate reached up to 95%. The interlayer spacing of intercalated TEG was further enhanced by the amorphous carbon-coated aluminum metal nanoparticles, thus forming a metal network structure and also played a vital role in the process of lithium-ion transportation by increasing the specic capacity and cycling stability. Huang et al. 113 used TEG as a exible conductive matrix to support the aluminum particles which were coated with carbon. The 3D network helped in the lithium ion transportation over larger distances and the agglomeration of aluminum was restrained. This anode material showed 75.9% capacity retention aer y cycles. Hu et al. 114 used intercalated carbon-coated trilithium vanadate (Li 3 VO 4 ) nanoparticles with TEG as a loading carrier to support the fast diffusion of electrons, in which they have demonstrated that TEG could be used as a conductive material with enhanced electrical conductivity. Additionally, a self-standing exible electrode was made using TEG to implant electrochemically active compounds such as silicon or sulfur for binder-free Li-ion batteries. 115 Bai et al. 116 studied the electrochemical properties of graphene sheets, TEG and natural graphite as anode materials for lithium-ion batteries. The large voltage hysteresis resulted for graphene sheets and expanded graphite electrodes due to the surface functional groups and crystalline defects. The kinetic properties of the graphene sheets, TEG and natural graphite electrode were studied by AC impedance measurements. The graphene sheets and TEG showed appreciable cycling stability with 90-95% of coulombic efficiency aer the rst cycle. The obtained reversible capacities of graphene sheets were 1130 and 636 mA h g À1 at a current density of 0.2 and 1 mA cm À2 which was higher than that of TEG and natural graphite. He et al. 117 designed a dual-ion hybrid energy storage system using TEG as an anion-intercalation supercapacitor-type cathode and graphite/nanosilicon@carbon (Si/C) as a cation intercalation battery-type anode for effective energy storage application (Fig. 7). Herein, the TEG cathode stores the energy through electrochemical double layer capacitance using the unique faradaic pseudocapacitive negative anion intercalation behavior. The Si/C//EG device exhibited energy density in the range of 252-222.6 W h kg À1 at a power density of 215 to 5240 W kg À1 , which is the highest reported value for hybrid systems. This hybrid dual ion battery exhibited an enhanced capacity retention around 95% aer 1000 cycles, which was higher than that of the commercially available supercapacitors, 118 lithiumion capacitors and commercial lithium-ion batteries. 117

TEG-metal based composites for energy applications
Zhao et al. 112 synthesized composite materials made of carboncoated aluminium/TEG by chemical vapor deposition and ball milling methods. They studied the mechanism of aluminium intercalation and deintercalation in the composite. It was found that the intercalation process of TEG further increased the interlayer spacing between the layers and formed a metallic aluminium network structure. This composite showed high lattice intercalation sites with an aluminium doping of 30%. In addition, it was used as the anode material for lithium-ion batteries which showed high cycling stability with a specic capacity of 381 mA h g À1 aer 50 cycles and the retention rate performance was up to 95%. 112 Recently, He et al. 111 stated that a polymer binder was used for the attachment of the catalyst dissolved substance onto the surface of a glassy carbon electrode. But, it did not increase the series resistance as well as masked the catalytically active sites, which could affect the electrochemical properties. To overcome this barrier, a composite was prepared by combining TEG, acetylene black and polytetrauoroethylene emulsion in a tablet form called a TEG matrix. Later, molybdenum disulphide (MoS 2 ) was grown on it by hydrothermal synthesis. The activity of the hydrogen evolution reaction (HER) of the composite was increased due to the presence of the TEG matrix as a conductive substrate which had a charge transfer resistance of about 0.919 U cm 2 , overpotential of about 230 mV (j ¼ 10 mA cm À2 ) and Tafel slope of 77 mV dec À1 . Chen et al. 1 synthesized PtCo nanoparticles on TEG composites by a solution-phase reduction method with ethylene glycol for direct methanol fuel cells. The electrocatalytic performance was studied by cyclic voltammetry and chronoamperometry. 1 The PtCo/TEG based composite showed high electrocatalytic activity and long-term stability because of TEG. It had exceptional electrochemical stability in acidic medium and proved to be a favorable anode material. The PtCo supported TEG showed a larger electrochemical active surface area which was higher (55.75 m 2 g À1 ) than that of Pt/C and PtCo/MWCNTs (multiwall carbon nanotubes). Also, the mass specic current (I f ) of PtCo/TEG (525.08 mA mg À1 ) was high, when compared with that of Pt/C (320.75 mA mg À1 ) and PtCo/ MWCNTs (474.59 mA mg À1 ). Therefore, the authors concluded that the PtCo/TEG composite exhibited better electrocatalytic performance and reduced the accumulation of oxidized carbonaceous species on the surface of the catalyst. Li et al. demonstrated a binder-free anode for lithium-ion batteries by using zinc oxide and TEG. They used atomic layer deposition to prepare ZnO from dimethyl-zinc (source) and water as the oxidant. The presence of TEG in the composite provided a conductive channel and mechanical support for the ZnO membrane. This composite was also prepared as a exible lm without a binder to act as an anode in the setup 115 (Fig. 8).
The electrocatalytic oxidation of different liquid fuels (ethanol, ethylene glycol, formic acid, methanol, etc.) was studied using the electrocatalyst of palladium nanoparticles (PdNPs) deposited on TEG-MWCNTs. 31 The rate of the oxidation process of these liquid fuels on the composite has been reported in the increasing order of aldehyde: (formaldehyde) > carboxylic acid (formic acid) > alcohols (ethylene glycol > ethanol > methanol) (Fig. 9). The morphology of the composite was studied using SEM where TEG exhibited the wrinkled layers along with the pores that usually offer a large surface area and more active sites on the surface. When comparing the MWCNT lm with the TEG-MWCNTs, the aggregations of MWCNTs were much reduced. Also, the surface of the TEG-MWCNTs turned out to be relatively rough. Such a surface was favorable for the electro-deposition of the PdNP catalyst. The PdNPs were spherical in shape with an average size of 5 nm which was embedded in the TEG-MWCNTs. 31 Wen et al. 119 fabricated a TiP 2 O 7 /TEG-based nanocomposite as an anode by the sol-gel method for lithium-ion batteries. The introduction of TEG into the composite increased the conductivity and reduced the particle size of TiP 2 O 7 (50-100 nm). The effect of the various ratios of TEG in the composite was studied, and the optimized ratio was 30%. Next, the electrochemical  performance of the TiP 2 O 7 /TEG-based nanocomposite was studied in both organic and aqueous electrolytes. The TiP 2 O 7 / TEG electrode showed a reversible capacity of 66 mA h g À1 at 0.1 A g À1 with a suitable potential of À0.6 V using aqueous electrolytes. An enhanced cycling stability was observed with 75% capacity retention aer 1000 cycles at a current density of 0.5 A g À1 . The TiP 2 O 7 /TEG anode was used in organic electrolyte (1 M lithium sulfate, Li 2 SO 4 ) where LiMn 2 O 4 as the cathode showed a specic energy of 60 W h kg À1 with a voltage of 1.4 V. It also showed higher rate capability and outstanding cycling performance with a capacity retention of 66% over 500 cycles at 0.2 A g À1 and 61% at 1 A g À1 over 2000 cycles.

Applications of TEG in sensors
The TEG/silver-zeolite-epoxy composite modied electrode showed good electro-catalytic activity for urea oxidation in alkaline solution and linearly responded for the detection of urea in the range of 0.4 to 2.8 mM with a limit of detection (LOD) of 0.05 mM. 120 Chen et al. 121 synthesized iron oxide nanomaterials with three different morphologies such as nanoplates, nanorods and 3D ower-like structures which were then coupled with TEG (Fig. 10).
These composite modied glassy carbon electrodes (GCE) were used for the electrochemical detection of three important organic pollutants. Among these, 3D ower-like iron oxide/TEG showed the best electrocatalytic performance and was employed for highly selective and sensitive detection of tetrabromobisphenol A (LOD ¼ 1.23 nM), sunset yellow (LOD ¼ 0.89 nM) and tartrazine (LOD ¼ 2.17 nM).
In a recent study, cerium oxide (CeO 2 ) was synthesized in three different morphologies (nanocubes, nanopolyhedra, and nanorods). Aer that, each one of these structures was individually mixed with TEG to prepare nanocomposites. 122 Compared to the other two morphologies, nanorod-CeO 2 exhibited the best electrochemical sensing performance towards Cd (LOD ¼ 0.39 mg l À1 ) and Pb ions (LOD ¼ 0.21 mg l À1 ) because of the high surface area and the lower charge transfer resistance. Similarly, PdO nanoparticle decorated TEG was also prepared and coated on the GCE for the electrochemical sensing of tetrabromobisphenol A (LOD ¼ 1.3 nM), hydroquinone (LOD ¼ 26 nM) and catechol (LOD ¼ 17 nM) at nanomolar levels. 4 The large surface area and more surface-active sites of TEG made it a perfect material for the construction of nanocomposites to prepare electrochemical sensors with high sensitivity, selectivity and reproducibility.

TEG-polymer composite materials
The TEG/epoxy composite was synthesized by using the solution mixing method, and the interaction between the TEG and epoxy matrix was examined 123 . The electrical, mechanical, and thermal properties of the resin were enhanced by the introduction of TEG into the nanocomposite. TEG sheets played a major role in decreasing the strain and increasing the tensile strength of the composite compared to epoxy resin. Furthermore, upon the addition of 9 wt% of TEG to the epoxy, the electrical conductivity increased from 10 À15 to 10 À5 S cm À1 , also the thermal properties of the composite increased from 340 to 480 C and the mechanical properties were found to be increased by more than 30%. These enhancements were credited to the good dispersion of TEG in the epoxy matrix.
Zheng et al. 124 reported a conductive polymer composite made of poly[styrene-co-acrylonitrile] (PSAN) and TEG. They reported that the oxidation and expansion conditions for TEG synthesis were more important and must be carefully controlled to avoid excessive oxidation of TEG which may led to a low expansion ratio and a honeycomb structure. The in situ polymerization of the styrene and acrylonitrile monomers inside the diamond-shaped pores of TEG resulted in the PSAN/TEG composite with a graphite network throughout the entire polymer matrix. In particular, the in-plane (surface) electrical resistivity was found to be 8.5 Â 10 À3 U cm and the throughthickness (between upper and bottom surfaces) resitsivity was found to be 1.2 Â 10 À2 U cm. The improved electrical conductivity of the PSAN/TEG composite was credited to the graphite ligaments through the entire composite sheet which formed a unique graphite network 124 .
Reticulated vitreous carbon (RVC) composite foam was prepared using TEG as a ller. 40 When carbon foam derived from polymers as a precursor exhibited brittleness, some reinforcement materials were added to improve its mechanical properties. In this case, the brittle nature of the vitreous carbon composite was improved and the compressive strength was improved from 0.57 MPa to 0.72 MPa by the addition of TEG. Poly furfuryl alcohol was mixed with the carbon matrix and the wt% of TEG was varied in the resin to ll the polyurethane foam template. Due to the presence of TEG, the reticulated vitreous carbon composite did not form any cracks aer the heat treatment up to 100 C and the compression strength increased along with the electrochemical surface area. Also, TEG had increased the interaction with the matrix and acted as a barrier for the crack propagations. This micro-structure improvement was observed for the wt. ratio of 1% TEG. The crystallinity of the RVC-TEG composite was improved due to the addition of TEG which was also helped to enhance the charge transfer reaction and specic electrochemical surface area of reticulated vitreous carbon electrodes. Yi et al. 125 reported an anode (3D) material containing stannic oxide, polyaniline and TEG by solvothermal and oxidative polymerization methods. The electrochemical performance of the composite was enhanced by the synergistic effects between TEG and polyaniline since the polyaniline can stabilize the structure, improve ionic diffusion during the charge-discharge process and reduce the electric contact resistance of the electrode materials with the addition of the electrolyte. The 3D TEG/tin oxide/polyaniline (TEG@SnO 2 @PANI) showed a coulombic efficiency of 77.8%, initial reversible capacity of 1021 mA h g À1 and aer 100 cycles, the value was maintained at 408 mA h g À1 . Wang et al. 126 prepared a polypyrrole/TEG nanocomposite by the vacuumassisted intercalation method via the in situ oxidation polymerization process without a surfactant. The pyrrole was strongly adhered on both sides of the TEG nanosheets and then polypyrrole was coated on TEG by the polymerization reaction. In this work, TEG nanosheets played an important role as current collectors during the charging and discharging process by speeding up the electron transport. In addition, TEG in the composite worked as a self-supporting skeleton and prevented the volumetric swelling and shrinking of the composite for high cycling stability. The polypyrrole/TEG nanocomposite showed a specic capacitance of 86.1% even aer 2000 charge and discharge cycles when 10% weight ratio of TEG was added.
In addition, conducting polymer composites with various morphologies can be synthesized for various applications such as bers, spheres, sheets, bulk, wires, etc. 127 For example, composites with porous nature could incorporate several chemical functionalities into the open site of the pores which increased the surface area, provided more electrochemically active sites and a good electrolyte-electrode interface for fast ion transport to improve the specic capacity or catalytic activity. 128 If we compare the aspect ratio, the wire and rodshaped polymer composites exhibited a high aspect ratio compared to the sphere shaped polymer composite. Therefore, the transport of electrical carriers along one controllable direction was possible. 129 The wire shaped composite materials showed high electronic conductivity and optical properties due to their high aspect ratio. 128 Furthermore, nanosheets with a nanoporous structure could increase the molecular interactions due to the increased specic surface area. 128 Also, polymer composites with sheet and ber like morphologies could offer high exibility than the bulk phase structured composite which was used in exible free-standing electrodes. It is worth mentioning that conducting polymer composites show more advantages such as light weight, high exibility, stretchability and easy processing to manufacture so robotic skin, articial muscles, human-machine interfaces, etc. 130 As discussed above, we believe that TEG based polymer composites can be prepared with enhanced mechanical, electrical and electrochemical properties.

TEG and enzyme based biocomposite electrodes
Ramesh et al. 131 constructed a sol-gel-based electrode using TEG modied with dopamine by covalent attachment through amide linkages via -COOH groups present on TEG. For this, TEG was dispersed in organically modied silicates to prepare the sol-gel. The as-prepared TEG/dopamine modied electrode showed high electrocatalytic activity towards the oxidation of nicotinamide adenine dinucleotide reduced form (NADH). The TEG/dopamine modied electrode was used to detect ethanol in the presence of nicotinamide adenine dinucleotide oxidized form (NAD + ) and alcohol dehydrogenase. This TEG/dopamine composite was prepared without using any binder and recompressed in a compact pellet for use as an electrode.
A low-cost electrode was designed for sensing hydrogen peroxide (H 2 O 2 ) and glucose using a stamped multilayer lamination process. 132 For this work, TEG was synthesized with full expansion and thus it was possible to fabricate hundreds of electrodes by the stamping method. [133][134][135] Also, this method could be used to prepare electrodes on exible substrates such as paper and plastic which are more economical and useful for sensing applications. Interestingly, researchers have constructed inexpensive electrodes that were laminated on a 100% biodegradable cellulose substrate which can be disposed easily without any toxic effects on the environment. To detect glucose, the laminated electrodes were treated with glucose oxidase which exhibited a linear response towards H 2 O 2 (from 1.95 to 500 mM) with a LOD of 1.91 mM. This sensor detected glucose in the range of 0 to 2.5 mM with a LOD of 1.22 mM in phosphate buffer solution (PBS.) It is worth pointing out that this electrode did not respond to higher levels of glucose in blood. 132 Therefore, these laminated electrodes may be useful for exploration purposes and non-invasive detection of glucose at low concentrations in sweat, tears and saliva. In addition, the endogenous peroxide sensing abilities of untreated electrodes could be useful for peroxide sensing, glucose-based fuel cells and detection of analytes at low concentrations. Tao et al. 136 fabricated an electrochemical immunosensor based on poly(maminophenol) immobilized with the anti-human immunoglobulin G (IgG) antibody and TEG (Fig. 11). Herein, glutaraldehyde was used as a coupling agent where the two aldehyde groups were found to react with the amino groups of poly(maminophenol) which was later deposited on the TEG surface through the amino group of the antibody. In this immunoassay method, the target antigen was a human IgG, the probing antibody was horseradish peroxidase coupled with goat antihuman (IgG) and poly methylene blue (PMB) was the electron transfer mediator. The electrochemical measurements showed that the oxidation peak current of PMBH (reduced state of PMB) was proportional to the concentrations of IgG from 5-60 mg ml À1 and the LOD was found to be 0.19 mg ml À1 . 136

Challenges and future prospects
During the preparation of TEG by using natural graphite via acid treatment and the metal intercalation process, various functional groups (-OH, -COOH, etc.) were generated on the surface of TEG. 99 In addition to high temperature, metal intercalates and graphite with different sizes are required to synthesize TEG. 137 However, this method could generate more acid wastes, reagents and also the expansion ratio of the graphite layer was uncontrollable during the synthesis process. Sometimes, TEG became an insulator due to the higher degree of oxidation due to which the oxygen content increased on the TEG material aer the synthesis. This is one of the limiting factors of TEG. In addition, the lateral dimensions of TEG are larger and thick when compared to those of the graphene platelets. Therefore, the electrochemical interface will be affected during the reaction. 4 It is important to point out that a high temperature is required for the expansion process of TEG which may also cause safety issues and more precautions should be taken. Also, synthesis of TEG with a good expansion ratio and high yield is still a challenge because of the abovementioned factors. On the other hand, the removal of intercalate ions from TEG is also required. The presence of trace level metals in the nal product may either have positive or negative effects during the electrochemical applications in supercapacitors, batteries, fuel cells, sensors, etc. Moreover, in order to disperse TEG in a suitable surfactant or solvent, additional instruments such as an ultra-sonicator were required to obtain stable dispersion along with composite materials. These are some of the challenges that have to be overcome in order to use TEG effectively in various commercial applications without any limitations.
TEG had also been used widely as a phase-changing material, 66,138 re retardant, 139,140 etc. due to its excellent thermal stability. Compared to graphene and CNTs, TEG is less expensive and easy to prepare. However, the electrochemical applications of TEG in the energy storage applications, exible sensors, hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and water purication process 97,141,142 must be further explored in detail and potential real-world applications should be demonstrated.
For this purpose, new methods and techniques should be developed to demonstrate TEG in the fabrication of electrochemical energy storage devices (batteries, supercapacitors and fuel cells) and sensors. We believe that extensive research on TEG will enable us to compare the advantages and disadvantages of TEG with CNTs and other graphene-based electrodes in terms of their electrochemical performances. In recent years, exible electronics and electrodes have received more attention. 143 In this direction, the future aspects of TEG and its suitability for the development of exible 108,144 (asymmetric supercapacitor, nanoelectronics, etc.) and wearable electronic devices for health care monitoring will be more promising and useful for healthcare applications. Due to its anti-corrosion properties, TEG can be used as an inhibitor in the painting of ships and can also be used in the manufacturing of smart sensor devices for checking the quality of food and reporting the moisture content of the packaged products. As we pointed out in this review, TEG has a lot of potential to be used in the nanocomposite preparation for various electrochemical applications.

Conclusion
Carbon materials have been used in various applications because of their easy availability with various microstructures.
The key factors that should be considered during the fabrication of electrodes include surface area, interconnected pore structure, controlled pore size matching to the intercalates, high electrical conductivity, the presence of functional groups, and high thermal and electrochemical stability. All these requirements can be fullled by employing TEG to prepare the composite material for electrochemical applications. TEG can be prepared by two common methods such as high temperature expansion aer acid treatment or microwave radiation in the presence of intercalants and oxidizing agents. Its distinct sandwich structure and elongated distance between the graphene layers provided an opportunity to intercalate with ions or molecules between the layers. At high temperatures, intercalates helped in the expansion of graphite layers by thermal expansion due to the gas evolution process. The force produced by the exhaust of these gaseous molecules started the exfoliation process of graphite and therefore a signicant growth in volume occurs; TEG with a very low density was produced. The surface morphology and pore structure of TEG can be tuned by the applied temperature and selection of suitable graphite ake sizes. It was possible to use TEG in the fabrication of electrode materials with high efficiency, high stability and high reliability as demonstrated in other publications. Finally, TEG proved to be an excellent composite material for various electrochemical applications. In many of the nanocomposites, we were able to nd that TEG was used in order to avoid binders in the energy storage applications. Also, TEG acted as a load carrier that supported the fast diffusion of electrons and thereby it was used as a conductive material to improve the electrical conductivity. The crumpled layers along with the porous nature of TEG might offer a large surface area thereby providing more active sites on the surface which could be helpful for electrochemical sensors. It was also demonstrated that TEG-based composites could be used to develop electrochemical sensors and biosensors with high selectivity and sensitivity for various analytes.

Conflicts of interest
The authors declare that they have no known competing nancial interests or personal relationships that could have appeared to inuence the work reported in this paper.