Issue 31, 2020

Achieving high-performance p-type SmMg2Bi2 thermoelectric materials through band engineering and alloying effects

Abstract

Thermoelectric Zintl phases have attracted increasing attention in the past few decades, with good thermoelectric performance observed in many different families. Due to their intrinsic low lattice thermal conductivity, p-type CaAl2Si2 (1-2-2)-type Zintl phases, which also exhibit relatively higher electrical transport performance, have been demonstrated to be promising thermoelectric materials for mid- to high-temperature applications. Here we investigate the thermoelectric performance of p-type SmMg2Bi2, a new member of this 1-2-2 Zintl family. Band structure calculations reveal that the calculated band gap of SmMg2Bi2 is smaller in comparison to that of other Bi-based Zintl phases, which inevitably contributes to the bipolar effect clearly observed at higher temperature. Further successful substitution of Eu and Yb is effective in suppressing the bipolar effect and ensures achievement of superior electronic performance, resulting in a peak figure of merit (ZT) of ∼0.9 at 773 K. The current work has successfully expanded the family of Bi-based p-type 1-2-2 Zintls, and could play an essential role in stimulating further investigation of other Zintl compounds.

Graphical abstract: Achieving high-performance p-type SmMg2Bi2 thermoelectric materials through band engineering and alloying effects

Article information

Article type
Paper
Submitted
03 Dec 2019
Accepted
20 Jan 2020
First published
21 Jan 2020

J. Mater. Chem. A, 2020,8, 15760-15766

Achieving high-performance p-type SmMg2Bi2 thermoelectric materials through band engineering and alloying effects

U. Saparamadu, X. Tan, J. Sun, Z. Ren, S. Song, D. J. Singh, J. Shuai, J. Jiang and Z. Ren, J. Mater. Chem. A, 2020, 8, 15760 DOI: 10.1039/C9TA13224D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements