Issue 25, 2020

Electricity generation by sliding an ionic solution droplet on a self-assembled reduced graphene oxide film

Abstract

Drawing potential has recently been observed in monolayer graphene that can generate electricity upon interaction with water; however, it remains a challenge to generate drawing potential in lower-cost and more stable layered materials. In this study, we used an electro-fluidic assembly method to fabricate a smooth reduced graphene oxide (rGO) film. A voltage in the millivolt magnitude was generated by controlling the movement of an ionic solution droplet over this rGO film, and the type and concentration of the ionic solution and the volume and sliding velocity of the droplet could directly influence the voltage amplitude. The direct observation of electrical double repulsive force between the rGO film and a silica probe confirms the existence of an electric double layer (EDL) on the rGO film, which leads to the formation of a micro-capacitor at the droplet/rGO film interface. Electricity was generated due to the transfer of electrons along the rGO film through the adsorption and desorption of cations in the solution, which is determined by the surface charge density on the rGO film. Because the rGO film is flexible and can be easily transferred onto a soft substrate, it has promising applications in wearable energy-harvesting devices and self-powered micro-electromechanical systems.

Graphical abstract: Electricity generation by sliding an ionic solution droplet on a self-assembled reduced graphene oxide film

Supplementary files

Article information

Article type
Paper
Submitted
12 Mar 2020
Accepted
04 Jun 2020
First published
05 Jun 2020

J. Mater. Chem. A, 2020,8, 12735-12743

Electricity generation by sliding an ionic solution droplet on a self-assembled reduced graphene oxide film

K. Wang, Y. Liu, J. Li and J. Li, J. Mater. Chem. A, 2020, 8, 12735 DOI: 10.1039/D0TA02868A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements