Efficient synthesis of chiral 2,3-dihydro-benzo[b]thiophene 1,1-dioxides via Rh-catalyzed hydrogenation† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c8sc05397a

Rh-Catalyzed asymmetric hydrogenation of substituted benzo[b]thiophene 1,1-dioxides was successfully developed. Both aromatic and alkyl substituted benzo[b]thiophene 1,1-dioxide substrates worked well with high yields and excellent enantioselectivities.


Introduction
The 2,3-dihydro-benzo[b]thiophene 1,1-dioxides and derivative motifs are widely distributed with signicant applications in many biologically active compounds, 1-6 such as the inhibitor of tumour necrosis factor-a converting enzyme (TACE), 2 antidiabetics 3 and HIF-2a inhibitors. 4 Other examples include benzothiophene scaffolds, such as 2,3-dihydroraloxifene as raloxifene's analogue with selective estrogen receptor modulator activity 5 and a potential HIV-1 reverse transcriptase inhibitor . 6 In addition, they are important synthetic intermediates in the eld of organic synthesis.
Although chiral 2,3-dihydro-benzo[b]thiophene 1,1-dioxides and their derivatives showed great potential, the development of highly efficient asymmetric synthetic methodologies to construct these compounds still remains very challenging. 7, 8 In 2017, Pfaltz and co-workers developed the asymmetric hydrogenation of prochiral benzo[b]thiophene 1,1-dioxides by using the Ir/pyridyl phosphinite ligand complex with moderate to excellent enantioselectivities, whereas for some aryl substituted substrates with slightly sterically hindered groups and alkyl substituted substrates it remained difficult to achieve both high reactivity and excellent enantioselectivity (Scheme 1). 7c Although some progress was achieved, it is extremely necessary to develop highly efficient asymmetric catalytic systems to prepare chiral 2,3-dihydro-benzo[b]thiophene 1,1-dioxides and their derivatives. Transition metal-catalyzed asymmetric hydrogenation of prochiral unsaturated heterocyclic compounds is a powerful and important method to synthesize chiral heterocyclic compounds. 9,10 Meanwhile, chiral ferrocenyl phosphine ligands have emerged as a class of important and privileged ligands, which exhibited excellent performance in asymmetric catalytic reactions. 11 Recently, our group successfully developed a series of bifunctional ferrocenyl bisphosphine-thiourea ligands, which were applied in some Rh-catalyzed asymmetric hydrogenation of unsaturated functionalized substrates. 12 We envisaged that the asymmetric hydrogenation of prochiral Scheme 1 Asymmetric hydrogenation of prochiral benzo[b]thiophene 1,1-dioxides. substituted benzo[b]thiophene 1,1-dioxides could proceed well with high reactivity and excellent enantioselective control with the aid of the possible hydrogen-bonding interaction between the sulfonyl group of the substrate and the thiourea motif of the ligand. Herein, we realized Rh-catalyzed asymmetric hydrogenation of prochiral benzo[b]ene 1,1-dioxides with N-methylated bisphosphine-thiourea ZhaoPhos L2 as the ligand, affording various chiral 2,3-dihydro-benzo[b]thiophene 1,1-dioxides with up to >99% conversion, >99% ee and 5000 TON (Scheme 1). Challenging substrates, such as aryl substituted substrates with sterically hindered groups and alkyl substituted substrates, also performed well in our catalytic system with excellent results.
A series of bisphosphine-thiourea ligands were then investigated in this Rh-catalyzed asymmetric hydrogenation (Fig. 1). As shown in Table 2, ZhaoPhos ligand L1 and N-methylated ZhaoPhos ligand L2 provided the same result with >99% conversion and >99% ee ( Table 2, entries 1 and 2), which indicates that one hydrogen bond is sufficient to obtain high reactivity and excellent enantioselectivity in this asymmetric transformation. The ligand L3 without the CF 3 group on the phenyl ring provided poor results (73% conversion, 56% ee,   . In addition, no reaction was observed using ligand L4 without the thiourea group, which showed that the possible hydrogen bonding interaction between the ligand and the sulfonyl group of the substrate was essential to achieve high reactivity and excellent enantioselectivity. In order to obtain the optimal ligand, this Rh-catalyzed asymmetric hydrogenation was conducted in the presence of ZhaoPhos ligand L1 and Nmethylated ZhaoPhos ligand L2 with a lower catalyst loading (0.5 mol%). We found that ligand L2 provided better results than ligand L1 (95% conversion, 98% ee, Table 2, entry 6). Under the optimized reaction conditions, the substrate scope of Rh-catalyzed asymmetric hydrogenation of prochiral substituted benzo[b]thiophene 1,1-dioxides was explored, and the results are summarized in Table 3. A wide range of 2-substituted benzo[b]thiophene 1,1-dioxides were hydrogenated smoothly catalyzed by Rh(NBD) 2 BF 4 /L2. When the 2-substituted benzo[b]thiophene 1,1-dioxides bearing the electron-donating group (1b and 1d-1f) or electronwithdrawing group on the phenyl ring (1c and 1g) were used, the corresponding hydrogenation products chiral 2-substituted 2,3-dihydro-benzo[b]thiophene 1,1-dioxides (2b-2g) were obtained with full conversions, high yields and excellent enantioselectivities (>99% conversion, 98-99% yields, 96->99% ee). And the position of the substituent on the phenyl ring had little effect on the reactivity and enantioselectivity. To our delight, 2-substituted benzo[b]thiophene 1,1dioxides with an ortho-(1d) or meta-(1e and 1g) substituted group on the phenyl ring with steric hindrance were hydrogenated smoothly with excellent results (>99% conversion, 98% yield and 97-98% ee). The asymmetric hydrogenation of the substrate with a bulky 2-naphthyl group also proceeded efficiently to afford the product (2h) with >99% conversion, 98% yield and 95% ee. Noticeably, the alkyl substituted benzo [b]thiophene 1,1-dioxides (1i-1l) were also hydrogenated well in our catalytic system, providing the desired products (2i-2l) with >99% conversion, 98-99% yields and 83-92% ee.
A nonlinear effect suggests that the potential dimerization or high-order aggregation of catalysts should exist in catalytic asymmetric reactions. 14 In order to verify the possible catalytic model, the asymmetric hydrogenation of substrate 1m was performed in the presence of ligand L2 with different ee values. And no nonlinear effect was observed in this transformation, which revealed that there should be no catalyst self-aggregation or ligand-substrate agglomeration in this catalytic system. Furthermore, a Job plot was drawn and the curve suggests a 1 : 1 binding pattern between ligand L2 and substrate 1m. On the basis of these observations and the reaction results, 3D catalytic models for the asymmetric hydrogenation of substrates 1a and 1m were built through DFT calculations to account for the possible hydrogen bonding interaction between the Rh-catalyst and the substrate (summarized in the ESI †).

Conclusions
In summary, a highly efficient synthetic methodology for the construction of various chiral 2,3-dihydro-benzo[b]thiophene 1,1-dioxides was successfully developed through Rh/N-methylated ZhaoPhos ligand L2-catalyzed asymmetric hydrogenation. Our catalytic system possessed wide tolerance of substrate scope, both aromatic and alkyl substituted groups at the 2position or the 3-position of prochiral benzo[b]thiophene 1,1dioxides worked well in this asymmetric hydrogenation to provide the desired products with high yields and excellent enantioselectivities (up to 99% yield and >99% ee). In addition, our catalytic system showed very high activity, and the gramscale asymmetric hydrogenation of 3-phenyl benzo[b]thiophene 1,1-dioxide proceeded well catalyzed by only 0.02 mol% (S/C ¼ 5000) Rh/ligand L2 catalyst loading with >99% conversion, 99% yield and 99% ee. The possible hydrogen-bonding interaction between the substrate and the thiourea motif of the ligand may make an important contribution to achieving Table 4 Scope study of the Rh-catalyzed asymmetric hydrogenation of 3-substituted benzo[b]thiophene 1,1-dioxides a a 0.1 mmol substrate 1, substrate 1/Rh(NBD) 2 BF 4 /L2 ¼ 1/0.01/0.011 at 70 C under 50 atm H 2 in 1.0 mL CF 3 CH 2 OH for 40 h, and the catalyst was pre-complexed in CH 2 Cl 2 (0.1 mL for each reaction vial). Conversion was determined by 1 H NMR analysis. Yield is isolated yield. The ee value was determined by HPLC on a chiral column. The absolute congurations of 2n and 2v were determined as (R) according to previous work. 7c Scheme 2 Gram-scale asymmetric hydrogenation with high TON. Scheme 3 Rh-catalyzed asymmetric hydrogenation of 2,3-disubstituted benzo[b]thiophene 1,1-dioxides.
high reactivity and excellent enantioselectivity in this reaction. Further investigations toward a catalytic asymmetric variant of this reaction process are under way.

Conflicts of interest
There are no conicts to declare.