Expedient synthesis of eumelanin-inspired 5,6-dihydroxyindole-2-carboxylate ethyl ester derivatives

Dihydroxyindoles such as 5,6-dihydroxyindole-2-carboxylic acid (DHICA) are the main monomer units of eumelanin, the black to brown pigment in humans, and have emerging biological roles beyond melanin. Elaboration of commercially available 5,6-dimethoxy-2-carboxylate ethyl ester provides ready access to DHICA-inspired small molecules, including 3-(hetero)aryl-indoles and 4,7-di-(hetero)aryl-indoles.

Similar structures recently emerged as hits in a large scale virtual inhibition screening of inuenza virus RNA-dependent RNA polymerase complex (RdRp). 19 As DHICA itself is prone to auto-oxidation, 2 we identied 5,6-dimethoxy-2-carboxylate ethyl ester 1 (DMICE) (Fig. 1) as a promising scaffold for the generation of DHICA-inspired small molecules.
DHICA derivatives have been of interest to synthetic chemists since the 1960's, and have been produced via classical organic and biomimetic routes. 1 Palladium-catalyzed chemistry, so widely used with other indoles, 20 has been applied only sporadically toward dihydroxyindoles. 10À13, 21 En route to the formation of DHI oligomers, d'Ischia and co-workers have investigated Sonogashira couplings. 11,12 The Nelson group has developed a six-step sequence from vanillin to create a 4,7dibromo-DHICA scaffold 3 (Fig. 2b) 21 and utilized a Sonogashira cross-coupling to elicit promising small molecule building blocks for organic semiconductors, 10 and a polymerizable monomer. 21 This work is of particular interest because DHICA is  Suzuki cross-coupling with alcohol-and nitrogen-protected DHICA derivatives was rst reported in 2008 by Huleatt, Chai, and co-workers. 13 These authors developed multiple synthetic schemes for the bromination of the 3-, 4-and 7-positions of the protected DHICA scaffold utilizing different starting materials. 22,23 The synthetic route, from commercially available aldehydes (4a) via a Cadogan-type cyclization of intermediates (4b) to the indoles (4c), is shown in Fig. 2c. In order to generate potential GPR35 agonists, Deng and Fang used a strategy of halogenation and subsequent palladium-catalyzed coupling (Fig. 2a). 16 DMICE (1), obtained from 2-bromo-4,5-dimethoxybenzaldehyde, was regioselectively brominated to 3-bromo-DMICE (5). Suzuki cross-coupling of 5 with ten boronic acids, yielded eight 3-aryl derivatives, as well as was 3-pyridin-3-yl and 3-thiophen-3-yl derivatives. Removal of the ethyl and methyl groups generated the corresponding 3-aryl-DHICA analogs (2). Now commercially available, 1 is an attractive scaffold for the generation of DHICA-inspired compounds. We explored the halogenation of DMICE and ultimately developed rapid routes to both 3-and 4,7-substituted aryl and heteroaryl derivatives without the need for protection of the indole nitrogen. Di-aryl/ indole trimers and di-heteroaryl/indole trimers are accessible in three steps from DMICE with two purications. The key advance toward these trimers was facile global bromination followed by regioselective debromination to selectively functionalize the eumelanin-relevant 4,7 positions. Suzuki coupling of the DMICE scaffold was optimized for 3-and 4,7-halogenated derivatives. Interestingly, 4,7-di-coupling proceeds more readily than coupling solely at the 3-position. The optimized monoand di-Suzuki couplings proceeded in high yields with both electron-rich and electron-withdrawing substituents on the aryl boronic acid partners. We could thus generate a set of eumelanin-inspired model compounds with a wide range of substituents for future structure-activity relationship studies. The modularity, short linear sequences, and substrate tolerance of the synthetic approach suggest that it could ultimately serve as a platform for eumelanin oligomer synthesis. As a rst step toward that goal and an exploration of DHICA-inspired compounds beyond the eumelanin context, here we describe the synthesis of twenty-six aryl-and heteroaryl DMICE derivatives, twenty-four of which have not been previously reported.
The functionalization of 1 began by exploring its reactivity with N-bromosuccinimide (NBS) 16 under a variety of solvent and temperature conditions. Selective bromination at the 3-position occurs rapidly in acetonitrile at room temperature with a single equivalent of NBS to produce 5 (Scheme 1). With excess NBS at intermediate times and elevated temperature (2 h, 65 C) 3,7dibromo-DMICE is the major product, suggesting that the 7-position is more reactive than the 4-position (see ESI †). Triple bromination to 3,4,7-tribromo-DMICE (6) could be readily achieved with four equivalents of NBS at 65 C for 24 h. The reactivity of the system is such that 4,7-dibromo-DMICE (7) is not a viable product directly from NBS halogenation. Nevertheless, 7 could be accessed in a two-step global halogenation/ selective de-halogenation sequence, inspired by the work of Murakami et al. 24 From 6, selective debromination at the 3position is achieved by utilizing m-dimethoxybenzene under acidic conditions to trap the in situ generated bromine, giving 7 in a good yield over two steps (Scheme 1). 24 The reactivity of the 3-position also allows for selective iodination with iodine under basic conditions to yield 3-iodo-DMICE (8). 25 The Suzuki cross-coupling conditions were initially optimized with 5 and a substantial excess of 4-methoxyphenylboronic acid ( Table 1, entry 1) utilizing XPhos Pd G2 as the catalyst in a THF/H 2 O mixture at 50 C at 4% catalyst loading. 26 A reduction in the equivalence of the boronic acid led to decreased conversion (entry 2). Switching the halogen from bromo-indole 5 to iodo-indole 8 (entry 3) and decreasing the amount of water in the reaction (entry 4) did not improve the conversion. Remaining with 8 and 1.25 equivalents of boronic acid, the reactivity was improved by switching to dioxane as the organic component of majority organic mixture and increasing the reaction temperature (entry 5). Further decreasing either the catalyst loading (entry 6) or the equivalence of the boronic acid (entry 7) resulted in incomplete conversion. The optimized conditions (Table 1, entry 5) improve upon the existing literature, reducing both the catalyst loading and the equivalence of the boronic acid coupling partner. 16 Having determined the appropriate conditions for the crosscoupling, a series of aryl boronic acids were examined to explore the scope of the reaction ( Table 2). Yields were uniformly good for electron-rich and electron-poor boronic acids as well as the sterically hindered 1-naphthaleneboronic acid. A variety of heteroatom boronic acids also provided good yields including the unsubstituted indoles at both the 4-and 6-positions. However, some heteroaryl boronic acids were unsuccessful under these conditions. 4-Pyridineboronic acid and 4-pyrazoleboronic acid gave no desired product, presumably through deleterious coordination to the active Pd 0 catalyst, 27 while 2furanboronic acid and 2-thiopheneboronic acid did not react, possibly as a result of competitive protodeborylation. 28 Notably, 9e and 9j were synthesized in higher yields than the previously reported procedure, 16 and the rest of the derivatives are novel compounds.
Having shown the efficacy of the Suzuki cross-coupling on the simpler 3-I-DMICE (8), conditions for a double coupling of 4,7-diBr-DMICE (7) were explored. Upon monitoring the reaction with 4-methoxyphenyl boronic acid under the optimized conditions for the mono coupling, it became apparent that the substrate reacted much more rapidly in comparison to 8, providing a quantitative conversion in 3.5 hours (see ESI, Table S1 †). Standard conditions 26 established for the XPhos Pd G2 catalyst also supported a rapid reaction in excellent yield, particularly with 2.5 equivalents of the boronic acid partner. With the optimized conditions determined, a set of boronic acids was analyzed to explore the robustness of the reaction (Table 3). Again, both electron-rich and electron-poor substrates performed similarly, with the exception of 4-cyanophenylboronic acid which gave only a modest yield. Sulfur and oxygencontaining heterocycles also gave good to excellent yields. The indole trimer (10l) generated in three steps from commercially available DMICE 1 highlights the ability of this chemistry to generate model compounds with increasing relevance to eumelanin.
Having access to 26 DMICE derivatives with a range of aryl/ heteroaryl substituents will allow us to systematically explore structure-activity relationships using these DHICA-inspired compounds. As a preliminary example, the unprotected indole-nitrogen in these compounds affords a proton in an uncluttered region of their 1 H NMR spectra. Comparing the 3aryl series, the chemical shi of this proton is clearly sensitive to remote substituents on the aryl ring in a Hammett fashion, 29 varying from d ¼ 8.74 ppm for the dimethylamino substituent to d ¼ 9.05 ppm for the cyano substituent (see ESI, Table S2 †). The 4,7-aryl series falls in much narrower range of d ¼ 8.64-8.73 ppm, perhaps indicating that steric interactions with the 7 0 -aryl ring are more signicant than electronic differences of the remote aryl substituents. The 4,7-heteroaryl series have chemical shis in a similar range, with the pronounced exception of 2-benzofuran at d ¼ 10.34 ppm, which is signicantly deshielded compared to 3-furan (d ¼ 8.84 ppm) or 6indole (d ¼ 8.72 ppm). This is potentially indicative of an intramolecular hydrogen bond with the indole NH as the donor and benzofuran O as the acceptor, although other factors such as ring current and anisotropy could also be responsible for the large chemical shi. 30 In summation, regioselective halogenation and dehalogenation of commercially available DMICE (1) has been developed, providing access to two different DMICE scaffolds for derivatization. Exploration of additional substitution patterns (i.e., 3,7-) is ongoing. Successful Suzuki cross-coupling conditions have been determined for 3-I-DMICE (8) and 4,7-diBr-DMICE (7) to produce 24 novel eumelanin-inspired compounds. Examination of the optical properties of these model compounds is underway. Also, this modular strategy is currently being explored for the synthesis of eumelanin dimers and trimers.

Conflicts of interest
There are no conicts of interest to declare.