Synthesis and photochemical response of Ru(ii)-coordinated double-decker silsesquioxane

A double-decker silsesquioxane based bis(terpyridine) ruthenium(ii) complex (2Tpy/Ru-DDSQ), a member of the polyhedral oligomeric silsesquioxane (POSS) class, has been synthesized. Its structure has been characterized using comprehensive techniques such as nuclear magnetic resonance (1H NMR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and UV-visible spectroscopy. This work not only deals with the synthesis of 2Tpy/Ru-DDSQ but also provides the first comprehensive investigation based on the photoluminescence and electrochemical features of a POSS member. With this structure, an efficient anodic photocurrent response has been obtained. This result has been attributed to the perfect arrangement of ruthenium(ii)-bis(terpyridine) (tpy) ([Ru(Tpy)2]2+) moieties in the DDSQ nano building blocks. Therefore, 2Tpy/Ru-DDSQ can be considered as a promising candidate for the development of new generation photosensitizers.


Introduction
2][3] Since coordinate bonds provide extended networks with well-dened geometries, developing transition metal based supramolecular coordination complexes with high thermal, chemical and structural stability as well as structural regularity and controllability 4,5 is a promising approach.This approach is very helpful especially in the study of photoinduced electron-and energy transfer processes. 6owever, supramolecular materials are known for their limited solubilities. 7Since telechelic monomers are capable of selfcondensation with transition metal ions, the solubility problems of the supramolecular materials could be overcome by using appropriate telechelic monomers. 8ubic polyhedral oligomeric silsesquioxanes (POSSs) have attracted much attention to be used as supramolecular nano building blocks. 9,10A POSS molecule consists of a rigid inorganic SiO 1.5 core surrounded by multiple tunable organic coronae (R 2 SiO).Therefore, it can be referred as hybrid material. 11Core with a nanometer scale provides higher homogeneity, reproducibility and predictability.Additionally, coronae give opportunities to tailor some properties of the molecules such as reactivity and solubility. 12Owing to the extraordinary properties of POSS, the attempts on using POSS derivatives as a part of transition metal based supramolecular coordination complex have been gradually increasing.In a previous study, POSS derivatives used as central cores of dendrimer to form highly functionalized molecular systems.Obtained metallodendrimer with Ru(II)-based chromophore exhibits summation effects in the electronic absorption measurements as well as an improvement in the quantum yield. 13Another study by Yam V. W. et al. has reported platinum(II)-terpyridine (Tpy) complex incorporated into POSS moieties.This study demonstrated that self-association process was governed by hydrophobic interactions owing to the POSS moieties.Morphological transformation of POSS moieties depending on the solvent media resulted in some interesting spectroscopic changes. 14nother study by Koytepe S. et al. reported POSS possessing terminal terpyridine (Tpy) ligands and they developed stable POSS coordination complexes with Cu or Co. 15 On the other hand, Akira Endo et al. managed the synthesizing a long-range ordered coordination polymer using POSS with eight terminal groups as a ligand through the controlling of reaction temperature. 16Lastly, Esther Carbonell et al. managed to synthesis three-dimentional coordination polymer.They used POSS decorated with eight terpyridine moieties and investigated its complexes with two different metal (Zn 2+ and Fe 2+ ) by absorption and emission spectroscopy. 17Although substantial amount of researches on transition metal complexes of POSS are available in the literatures, none of them is about their affects on photoelectrochemical features.
It is well known that conventional POSS has a rigid structure and at least eight reactive sites.Thus, it is difficult to functionalize and to purify it.Moreover, rigid structure causes aggregation.Double-decker shaped silsesquioxane (DDSQ), one of the members of POSS family, has some structural differences that bring additional advantages such as high yield, easy puri-cation, and relatively less rigidness. 180][21] Thus, using DDSQ derivatives as telechelic monomers may increase the solubility of supramolecular coordination complex and overcome the difficulties on conjugating of POSS with the metal centres.
In order to investigate the affects of a POSS member on the photochemical properties, DDSQ based Ru(II)-bis(terpyridine) complex (2Tpy/Ru-DDSQ) has been synthesized.Characterization of 2Tpy/Ru-DDSQ has been carried out by using Fourier transform IR (FT-IR), nuclear magnetic resonance ( 1 H NMR) spectroscopy, X-ray photoelectron spectrometer (XPS), UVvisible spectroscopy and cyclic voltammogram (CV).2Tpy/Ru-DDSQ is found to be electrochemically stable and generates efficient photocurrent due to the good assembling ability of the [Ru(Tpy) 2 ] 2+ moieties in the DDSQ nano building blocks.

General methods
FT-IR spectra were obtained using an FT-IR spectrometer (FTIR4200; Jasco Inc.).IR spectra of DDSQ based materials were recorded between 4000 and 750 cm À1 with 4 cm À1 resolution, under a continuous nitrogen purge. 1 H and 13 C NMR measurements were carried out with a JEOL JNM-AL 400 spectrometer, in CDCl 3 or DMSO-d 6 without tetramethylsilane.For MALDI-TOF MS (Bruker Daltonics) analysis, the matrix 1,8,9anthracenetriol (dithranol) (10 mg) and the salt silver tri-uoroacetate (AgTFA) (2 mg) was separately dissolved in THF (400 mL). 2 mg of sample (100 mmol in THF) was dissolved in 100 mL THF.The MALDI analysis sample was prepared as following three-step droplet method.The resultant solutions with the volume ratio of 1 : 1 : 1, v/v/v were separately deposited on a stainless steel sample plate and dried.The measurement was done in linear mode with a N 2 laser (337 nm), and positive mode with an accelerating voltage 20 kV.A X-ray photoelectron spectrometer (XPS, PHI 5600; PerkinElmer Inc.) was used to control elemental composition and oxidation state of elements at the surface.All binding energies in XPS measurements were referenced to the C 1s peak for neutral carbon, which was assigned as a value of 285.0 eV.The take off angle was xed at 45 .

Spectroscopy and photocurrent measurements
UV-vis absorption spectra were measured using a Hitachi U-3000 UV-vis absorption spectrometer.Emission spectra were measured using a Hitachi F-4500 spectrouorophotometer.The analyses were carried out using the home-made cell (ESI, Fig. S11 †).An ITO electrode was cleaned respectively by sonication in isopropyl alcohol, chemical detergent solution, and distilled water.Then ITO was modied with 2Tpy/Ru-DDSQ and used as a working electrode.Silicone rubber (width Â length Â height ¼ 20 mm Â 20 mm Â 6 mm) was placed onto working electrode to create a rectangular well and 0.1 M KClO 4 aqueous electrolyte that was bubbled with nitrogen gas for 30 min prior to the photocurrent measurement was poured into the space.Then, the well was covered by glass substrate.A platinum wire and Ag/AgCl were used as counter and a reference electrode, respectively.The wires were put in the cell through the silicone rubber.The photocurrent was measured using a potentiostat (ALS 611B; BAS, Inc.).Two xenon lamps (500 W) equipped with UV cutoff lters (VY43, Toshiba, black 50), IR cutoff lters (IRA-2S; Toshiba Corp.), and colour lters (at 450 nm, Y44, Yellow 440) were used to obtain the monochromic light.In these conditions, the radiant power landing on the surface of the cell window is 2 mW cm À2 .During this experiment irradiation was alternatively switched on and off using a shutter.All measurements were carried out at room temperature.Data were smoothed with a locally weighted least squares method in Kaleidagraph (v.4.2) soware (SYNERGY SOFTWARE).

Preparation of amine functional bis(terpyridine) Ru(II) complex; Tpy/Ru
Complexation reaction of Tpy-NH 2 with RuCl 3 $3H 2 O was preceded and 6-aminohexyl 4 0 -(2,2 0 :6 0 ,2 00 -terpyridinyl) ether Ru(II) complex (Tpy/Ru) was obtained as seen in the ESI Scheme S1b.† The reaction procedure is as following.A solution of Tpy-NH 2 in methanol was stirred at 110 C. Then equimolar amount of RuCl 3 $3H 2 O was added.Stirring was continued overnight.At the same temperature, equimolar amount of 2,2 0 :6 0 ,2 00 -terpyridine compound was added to the solution mixture.The resulting dark orange precipitate was collected by ltration and washed twice with ice-cold water, followed by the ethyl ether.

Synthesis of telechelic DDSQ-Tpy monomer, 2Tpy-DDSQ
Epoxy-amine curing reaction was proceeded according to the literature procedures. 23,24Both reactants 4EPX-DDSQ 25 (1.15 g, 0.65 mmol) and 2,2 0 :6 0 ,2 00 -terpyridine (Tpy-NH 2 ; 1 g, 2.9 mmol) were dissolved in THF and then reaction mixture heated till 75 C step by step.The solvent was evaporated.The pure product was obtained in a 20% yield aer column chromatography (with THF/hexane eluent system).The possible products obtained from the reaction of 4EPX-DDSQ with Tpy-NH 2 have been displayed with their exact molecular weight in ESI Chart S1. † Estimated molecular weights of possible products aer a single reaction of the primer amine with an epoxy group are as in the following; 2104 g mol À1 for 1Tpy-DDSQ, 2452 g mol À1 for 2Tpy-DDSQ, 2801 g mol À1 for 3Tpy-DDSQ and 3149 g mol À1 for 4Tpy-DDSQ (ESI Chart S1 †).Theoretical molecular weight of 2Tpy-DDSQ in which two Tpy ligands connect to one component of DDSQ core, is 2452.Therefore, the base peak at m/z ¼ 2450.59[M À 2] can be associated with the molecular ion peak of 2Tpy-DDSQ.The results from MALDI-TOF/MS and 1 H NMR have shown that reaction has been processed through two arms of DDSQ (Scheme 1).Therefore 2Tpy-DDSQ in which two Tpy ligands connected to one DDSQ core has been considered as the yield of reaction (Scheme 1).It is believed that Tpy-NH 2 molecules have been attached to ethylene oxide rings of the DDSQ molecule that are in the diagonal position due to the steric hindrance effect of Tpy ligands.
The difference between theoretical molecular weight and base peak is probably attributed to loss of two hydrogen atoms shared by two nitrogen atoms maybe aer ionisation process of MALDI-TOF/MS.It is well known that in the positive ion mode, compound generally has been positively charged.However in some condition, for example in the basic solution, compound can be negatively charged even in the positive mode. 26Although MALDI-TOF/MS of 2Tpy-DDSQ has been done in positive mode, 2Tpy-DDSQ has been negatively charged.Analysing molecular weight of analyte has been carried out under the presence of 1,8,9-anthracenetriol (dithranol) as a matrix and AgTFA as a salt.The negatively charged manner in the positive mode may be attributed to the some interaction of OH or NH groups at the chains' of DDSQ with environment.

Synthesis of DDSQ based bis(terpyridine) Ru(II) complex, 2Tpy/Ru-DDSQ
A solution of 2Tpy-DDSQ in methanol (MeOH, 5 ml) and two fold excess amount of RuCl 3 $3H 2 O in MeOH (5 ml) was stirred for 30 min, heating under reux.A few drops of N-ethylmorpholine were added and the solution turned from orange to reddish.Heating under reux was continued overnight, aer which an excess of NH 4 PF 6 (45 mg, 0.27 mmol) was added.Subsequently, the reaction mixture was a cooled to 0 C. The resulting dark orange precipitates were collected by ltration and washed twice with ice-cold water, followed by the ethyl ether.

Results and discussion
Synthesis of DDSQ based bis(terpyridine) Ru(II) complex has two stages: rst stage is the synthesis of the telechelic DDSQ-Tpy monomer whereas the second stage is the synthesis of DDSQ based Ru(II)-Tpy coordination complex.Each stage has been explained in detail.Then, photocurrent properties of DDSQ based bis(terpyridine) Ru(II) complex have been investigated.DDSQ functionalized with four epoxy end-groups (4EPX-DDSQ) 25 is preferred to use as an initial compound due to the high reactivity of the oxirane rings.Telechelic DDSQ containing Tpy monomers (2Tpy-DDSQ) has been obtained aer an epoxyamine curing reaction between 4EPX-DDSQ and Tpy-NH 2 .In here, epoxy-amine curing reaction occurs via nucleophilic attach of the amine nitrogen on the terminal carbon of the epoxy function.According to Narracott, Chapman, Isaacs, and Parker, who are specialists on curing reaction, there are many possible reaction pathways occurring during the curing process. 27This indicates that generally a curing reaction is not selective.In the present study, curing reaction is just catalyzed by primer amine of NH 2 -Tpy (Scheme 1).No any additional catalyst has been used.Therefore it is believe that oxirane ring opening reaction occurs in moderate conditions, in here.
The structure of 2Tpy-DDSQ has been characterized by using FT-IR, UV-visible, NMR and MALDI-TOF/MS.Fig. 1 portrays the comparison between FT-IR spectra of 4EPX-DDSQ and 2Tpy-DDSQ.In the FT-IR spectrum of 2Tpy-DDSQ, the appearance of Si-O-Si absorbance at 1050 cm À1 indicates DDSQ core is preserved in the structure.Appearance of C]C absorbance at 1605 and C]N absorbance at 1567 cm À1 indicate that Tpy aromatic rings have been participated to the DDSQ structure.Observing of all these peaks in the FT-IR spectrum indicates successful connection of Tpy ligands to the DDSQ core.On the other hand, a strong vibration related to the ethylene oxide ring stretching is still appeared at 1250 cm À1 in the spectrum of 2Tpy-DDSQ, indicating some of ethylene oxide rings do not enter the reaction.NH and OH stretching frequencies are slightly observed respectively at 3297 and 3373 cm À1 (Fig. 1b), indicating secondary amine and hydroxyl groups have been generated aer curing reaction.Moreover, N-H and O-H bending vibrations at 1601 cm À1 and at 1358 cm À1 , respectively support the presence of secondary amine and hydroxyl groups.Consequently, according to the FT-IR results, the presence of stretching and bending vibrations related to secondary amine (N-H) have been conrmed.This result suggests that probably most of primary amines enter the reaction only once (Fig. 1a).According to the results taken from FT-IR, no further reaction could occur due to the moderate reaction condition.
Upon comparison of the 1 H NMR spectra of 2Tpy-DDSQ and Tpy-NH 2 , it is clearly seen that the resonances of the aromatic and methyl protons of Tpy-NH 2 have appeared in the spectrum of 2Tpy-DDSQ even in the same ranges without any chemical shiing (Fig. 2).The integrations of the peak areas related to 2Tpy-DDSQ and Tpy-NH 2 on the NMR spectra are given in ESI, Table S1.† Regarding the integration ratio of the peaks, it has been conrmed that two molecules of Tpy ligands are attached to one molecule of the DDSQ core by amine-epoxy curing reaction.On the other hand, the protons of unreacted ethylene oxide ring are overlapped with the protons of di(ethylene glycol) units attached to the DDSQ core.Therefore, the protons of unreacted ethylene oxide ring could not be observed separately in the NMR spectrum.As seen in the ESI, Table S1, † in case of the DDSQ arms (the one connected to Tpy ligand), the theoretical total numbers of protons are in very good agreement with the true integral values of these protons appeared in 1 H NMR. This result is the main clue that clearly reveals the proposed structure, 2Tpy-DDSQ.
In order to provide more precise information about the molar mass and structure of the synthesized 2Tpy-DDSQ, MALDI-TOF/MS is presented in ESI Fig. S3.† Theoretical molecular weight of 2Tpy-DDSQ in which two Tpy ligands connect to one component of DDSQ core, is 2452.Therefore, the base peak at m/z ¼ 2450.59[M À 2] can be associated with the molecular ion peak of 2Tpy-DDSQ.Predict molecular weight of Tpy-DDSQ is approximately equal to results from mass spectrometry.The difference between theoretical molecular weight and base peak is probably attributed to loss of two hydrogen atoms shared by two nitrogen atoms maybe aer ionization process of MALDI-TOF/MS. 26he aforementioned integration ratios obtained from 1 H NMR and MALDI-TOF/MS are consistent and clearly verify the same structure, 2Tpy-DDSQ.In this structure, two Tpy ligands have attached to one DDSQ core.We believed that Tpy ligands have been attached to ethylene oxide rings that have diagonal position due to the steric hindrance effect of Tpy ligands.As mentioned above, the curing reaction composes of many reaction pathways.In this study, 2Tpy-DDSQ has been obtained in 20% yield aer column chromatography.The structural characterizations of 2Tpy-DDSQ, especially 1 H NMR, have been found satisfactory enough aer being studied in detail as shown above.This achievement has remarkable importance before holding the complexation step.

Synthesis and characterization of the DDSQ based Ru(II)bis(terpyridine) complex, 2Tpy/Ru-DDSQ
In the rst stage, according to the analysis results of 1 H NMR and MALDI-TOF, the mole ratio of Tpy ligand to the DDSQ core is clearly conrmed to be a 2 : 1.In the second stage, 2Tpy-DDSQ has been coordinated a twofold excess amount of transition metal ions RuCl 3 $3H 2 O.This process yields a DDSQ based Ru(II)-bis(terpyridine) complex, 2Tpy/Ru-DDSQ (Scheme 1).Coordination complex is soluble in various solvents and sufficiently stable to be processed and characterized.2Tpy/Ru-DDSQ has been characterized by various methods, including FT-IR, NMR, XRD, electrochemical and photophysical analyses.
In the FT-IR spectrum of 2Tpy/Ru-DDSQ (ESI, Fig. S4 †), some changes have been observed when comparing with the corresponding spectrum obtained from the starting reagent of 2Tpy-DDSQ.The main differences are based on the shiing of stretching vibrations of C]N (imino) and C]C bonds related to Tpy ring and NH bond attached to the DDSQ arms.The former one is associated to metal coordination.On the other hand in the latter case, the shiing of NH stretching to lower frequencies (3211 cm À1 ) is attributed to the increasing of the hydrogen bond ability of NH bonds.
The complete 1 H NMR spectrum of 2Tpy/Ru-DDSQ has been displayed in ESI, Fig. S5 † and the range of aromatic protons related to [Ru(Tpy) 2 ] 2+ complex has been given in Fig. 3.As in the previous reports, aer complexation reaction, the protons in 3 0 ,5 0 and 6,6 00 positions were shied respectively to lower and higher elds due to the conformational change from the antiperiplanar to the synperiplanar. 28On the other hand, the aromatic protons of Tpy in 5,5 00 and 6,6 00 positions are overlapped with those of phenyl groups attached to the DDSQ core.The existence of aromatic proton nucleus and their chemical shis are in agreement with the literature 29 and demonstrate full complexation of the terpyridine ligands.
The composition of 2Tpy/Ru-DDSQ has been analysed using X-ray photoelectron spectroscopy (XPS).The XPS spectrum shows peaks at 534, 400, 288, 155, 102, and 281 eV which respectively indicate the presence of oxygen (1s), nitrogen (1s), carbon (1s), silicon (2s), silicon (1s) and ruthenium (3d) (Fig. 4).The presence of Ru signal on the XPS spectrum conrms expected complexation reaction and yields 2Tpy/Ru-DDSQ.Thermal properties of 2Tpy/Ru-DDSQ have been evaluated  Reddish solution of 2Tpy/Ru-DDSQ in acetone shows high-and low-energy absorption bands as seen in the Fig. 5.The highenergy absorption band at 280-300 nm is assigned to the intraligand (IL) [p / p*] transition of alkynyl (phenyl groups attached to the DDSQ core) and Tpy ligand, while the low energy absorption band at 400-480 nm is assigned to the metal-toligand charge-transfer (MLCT) for [Ru(Tpy) 2 ] 2+ .On the other hand, the low-energy absorption bands at 481 nm with the increasing concentration range are found to obey Beer's law (ESI, Fig. S8 †), indicating that there is no signicant aggregation in acetone.To verify the assembly process of 2Tpy/Ru-DDSQ, polarized optical microscopy (POM) has been employed (ESI Fig. S9 †).POM images of 0.01% and also 0.1% 2Tpy/Ru-DDSQ cast lms display the homogenous dispersion without aggregation.
Normally, Ru(III) species have absorption band around 400 nm.However, as seen in the Fig. 5 in shaded region, no any absorption band is available.Regarding this result together with complexation process (since a reducing agent, N-ethylmorpholine, has been utilized) all Ru(III) are converted to Ru(II).
As a further support for the structural conrmation of 2Tpy/ Ru-DDSQ, a model compound (Tpy/Ru) based on [Ru(Tpy) 2 ] 2+ moiety is formed. 8The model compound Tpy/Ru is obtained through complexation of Tpy-NH 2 with transition metal ions of   As mentioned above, UV-visible spectroscopy of 2Tpy/Ru-DDSQ presents a characteristic MLCT band at 480 nm related to Ru(II) bis(terpyridine) complexes, indicating full complexation.On the other hand, absence of an absorption band around 400 nm indicates that half complex of Ru(III) has not been formed.In this condition, it can be assumed that full complexation with Ru(II) occurs predominantly (Chart 1).
3.3.2Luminescence properties.The emission spectra of 2Tpy/Ru-DDSQ and Tpy/Ru as measured in acetone, are depicted in Fig. 6.The emission spectrum is independent of the excitation wavelength since the same emission band (550-700 nm, a strong band at 610 nm) has been obtained using three different 390, 400, and 410 nm excitations.This band can be assigned to the Tpy-Ru complex, in agreement with the literature. 13On the other hand, as seen in the Fig. 6, the model compound Tpy/Ru and 2Tpy/Ru-DDSQ show very similar luminescence feature that is apparently attributed to absence of any negative effect of the DDSQ structure.
In the structure of 2Tpy/Ru-DDSQ, since the ratio of DDSQ core and [Ru(Tpy) 2 ] 2+ moiety is 1 : 1, the concentration of [Ru(Tpy) 2 ] 2+ moiety is about 50 mol%.In the literature, it is stated that concentration-based quenching occurs when the concentration of a metal ion complex is over 5 mol%. 31lthough the fraction of [Ru(Tpy) 2 ] 2+ moiety in 2Tpy/Ru-DDSQ is about 22%, the luminescence intensity increases with increasing concentration of 2Tpy/Ru-DDSQ, indicating no emission quenching via electron transfer (Fig. 6).Despite the higher concentration of [Ru(Tpy) 2 ] 2+ moiety, it is believed that good assembling of [Ru(Tpy) 2 ] 2+ moiety in the coordination polymer possibly prevents the concentration-based quenching.
Redox properties of the coordination polymer 2Tpy/Ru-DDSQ have been investigated using home-made cell containing 0.1 M KClO 4 aqueous electrolyte.Fig. 7 portrays CV curves for ITO electrode modied by the 2Tpy/Ru-DDSQ cast lm in the 0.1 M KClO 4 electrolyte solution at a scan rate of 10 mV s À1 (Fig. 7a).The voltammogram respectively depicts well-dened surface waves consisting of almost symmetric oxidation at   1.21 V and reduction peaks at 0.9 V related to [Ru(Tpy) 2 ] 2+ moieties (Fig. 7b).3][34] The electrochemical measurement indicates that electrochemical properties of [Ru(Tpy) 2 ] 2+ moieties are sustained in the coordination complex of the DDSQ structure. 35o understand the structure and optoelectronic property relationship of 2Tpy/Ru-DDSQ, an "on" and "off" photoswitchable photocurrent experiment has been conducted.A three-electrode method was used to study the photoelectric conversion property of 2Tpy/Ru-DDSQ coated on ITO under the illumination with a xenon lamp (l ¼ 450 nm, ESI Fig. S11 †).The relationship between the photocurrent value and the irradiated time for 2Tpy/Ru-DDSQ is shown in Fig. 8. Aer the rst few cyclings, photocurrent generation becomes relatively stable.Even in the absence of any external electron donor molecule in the degassed electrolyte solution, satisfactory anodic photocurrent efficiency (15 pA cm À2 ) has been obtained with the 2Tpy/Ru-DDSQ complex. 37This can be considered to be one of the clearest effects of DDSQ structure.
Generally photoexcited ruthenium complex [Ru(Tpy) 2 ] 2+ * occurs when [Ru(Tpy) 2 ] 2+ moiety is excited by light.It is well known that [Ru(Tpy) 2 ] 2+ * can be reduced and/or oxidized in the photoexcited state.Furthermore, in an anodic photocurrent process (reductive quenching), [Ru(Tpy) 2 ] 2+ * can be quenched by an electron donor which transfers an electron to the [Ru(Tpy) 2 ] 2+ * moiety.On the other hand, in the cathodic photocurrent process (oxidation quenching), [Ru(Tpy) 2 ] 2+ * can be quenched by electron acceptor molecule where the electron transfer takes place from the [Ru(Tpy) 2 ] 2+ * to the electron acceptor molecule. 36Thiol derivatives are well known as electron donor molecules. 37Similarly aliphatic amine molecules can serve as electron donor molecules owing to strong electron donating ability of the amino group. 38It is believed that amine quenches the chromophore by an electron transfer process, which forms an amine radical cation in a similar manner to thiol (ESI Fig. S12 †).Then, termination of the couple radicals takes place.In this study, the amine groups nearby the [Ru(Tpy) 2 ] 2+ moiety in the structure of the coordination polymer 2Tpy/Ru-DDSQ execute the function of electron donor molecules.Since the required electron donor molecule for anodic photocurrent is already available in the structure, no additional electron donor molecule is needed.
As a mechanism for the photocurrent generation, rst, the [Ru(Tpy) 2 ] 2+ chromophore is excited by light, and then the excited [Ru(Tpy) 2 ] 2+ * chromophore is effectively quenched by the aliphatic amine anion in the same manner to thiols.The aliphatic amine anion turns into the [Ru(Tpy) 2 ] + species, which was conrmed in the previous studies. 39Then the anodic photocurrent is produced by the electron transport from the [Ru(Tpy) 2 ] + to the ITO electrode as seen in Fig. 9.The electron transport process is found to be acceptable due to the perfect assembling of [Ru(Tpy) 2 ] 2+ in the DDSQ nano building blocks.

Conclusions
To our knowledge, this is the rst study in which a DDSQ based bis(terpyridine) Ru(II) complex has been synthesized.Its structure has been clearly described by 1 H NMR, XPS, UV-vis spectroscopy.It has been found that DDSQ based Ru(II) complex offers many advantages including good thermal stability, and good solubility in common solvents, and high purity via column chromatography.On the other hand, CV measurement conrms the electrochemical stability of [Ru(Tpy) 2 ] 2+ moieties.Moreover, our results have been assisted by the investigation of the photocurrent response of 2Tpy/Ru-DDSQ.Efficient energy conversion obtained without the addition of a donor molecule is attributed to good intramolecular intercomponent interactions of [Ru(Tpy) 2 ] 2+ moieties in the DDSQ nano building blocks.Therefore, DDSQ based bis(terpyridine) Ru(II) complex has a great potential to be used as a photosensitizer and deserves further studies.

RuCl 3 $
3H 2 O in the presence of excess 2,2 0 :6 0 ,2 00 -terpyridine (Scheme S1, b †).A proportional increase in the light absorption ability of Tpy/Ru complex with increasing concentration (ESI, Fig. S2 †) has conrmed the purity of Tpy/Ru.Since Tpy/Ru and 2Tpy/Ru-DDSQ complexes have the same optical species ([Ru(Tpy) 2 ] 2+ ), their light absorption characteristic and extinction coefficients should be the same 30 (ESI Fig. S10 †).The repeating unit of the coordination polymer contains a DDSQ core and a Ru(II)-Tpy moiety.Therefore at the same intensity of absorbance (absorbance ¼ 3 Â c Â l), the concentration of Ru(II)-Tpy moiety in coordination polymer should be the same with the concentration of Tpy/Ru.According to this assumption, the mole fraction of Ru(tpy) 2 2+ was determined to be 0.22 from the UV-vis absorption spectrum (see ESI Fig. S10, Appendix part †) indicating 22% Ru(II)-Tpy moiety participate in the DDSQ nano building blocks.

Fig. 6
Fig. 6 Emission spectra of the model compound Tpy/Ru and 2Tpy/ Ru-DDSQ with different concentrations.Three different wavelengths of 390 nm, 400 nm and 410 nm are used as the excitation wavelengths for 2Tpy/Ru-DDSQ.

Fig. 8
Fig. 8 Photocurrent response of 2Tpy/Ru-DDSQ.Photocurrent was measured in a conventional three-electrode electrochemical cell with potential of 0 V vs. Ag/AgCl.