Identifying the first folded alkylbenzene via ultraviolet, infrared, and Raman spectroscopy of pentylbenzene through decylbenzene† †Electronic supplementary information (ESI) available. See DOI: 10.1039/c7sc02027a

The shortest possible single-chain alkylbenzene to exist in a folded conformation is determined using spectroscopic and theoretical techniques.


I. Introduction
Alkylbenzenes are principal components of petroleum-based gasoline and diesel fuel, comprising some 20-30% of their chemical composition. 1 Both single-chain and multiple-chain alkylbenzenes are prevalent, with chains varying in length from methyl groups to ten or more carbon atoms. [2][3][4] Indeed, decylbenzene has recently been proposed as a surrogate for long-chain alkylbenzenes in diesel fuel. 5 One of the interesting facets of the presence of these long-chain alkyl groups attached to benzene is that their juxtaposition in a single molecule produces combustion chemistry characteristic of both aromatics and alkanes simultaneously. 5 Alkyl chains in this size regime possess complicated potential energy landscapes that develop with chain length in fascinating ways, especially in the presence of the aromatic p cloud, which can engage in dispersive attractions with the alkyl chain. [6][7][8] In the pure n-alkanes, the dihedral angles about each C-C single bond prefer trans (180 ) over gauche (AE60 ) arrangements due to steric effects. 9 As a result, the all-trans conformations are lowest in energy up to n ¼ 17 AE 1, 10 with each gauche 'defect' causing a destabilization of about 2.5 kJ mol À1 . 11 However, counteracting these steric effects are the dispersive interactions between sections of the alkyl chains. In a recent spontaneous Raman study of the pure alkanes by Suhm and coworkers, 10 they showed that beyond n ¼ 17 AE 1, the alkyl chains prefer to loop back on themselves. 10 This fold is composed of four gauche defects separated by a single trans dihedral (g iÀ2 , g iÀ1 , t, g i+1 , g i+2 ) that neatly place the two all-trans portions of the chain in an anti-parallel arrangement, commensurate with one another, as predicted by theory. 9,12 A main goal of the present work is to establish when such folding rst energetically competes with extended chains in the alkylbenzenes. The presence of the phenyl ring at one end of the alkyl chain provides an electron-rich p cloud to interact with the alkyl chain through attractive dispersion forces that are likely to be somewhat greater than between two alkyl chain segments. 13, 14 We seek to understand (i) what the nature of the fold is in this context, (ii) how it is similar to, or different from, that in the pure alkanes, and (iii) at what length alkyl chain such a fold begins to compete.
The conformations of reasonably unstrained pure n-alkyl chains are distinguished from one another by specifying a series of dihedral angles that are either trans/anti (180 ), or gauche (AE60 ). Both the trans and anti designations are used somewhat interchangeably in the literature. We use trans here, in deference to the early IR work of the Strauss group on the conformations of the pure alkanes. 15 As the length of the alkyl chains increases, naming individual conformers by labelling every dihedral angle becomes cumbersome, so we will employ the naming scheme used by the Suhm group in their study of the pure alkanes. 10 Each conformer of a given alkylbenzene will be characterized by its deviation from the out-of-plane all-trans structure. Every observed conformation places C(1) in-plane and C(2) nearly perpendicular to the plane of the ring, as it is in ethylbenzene. We designated this initial dihedral as perpendicular, or p, in the previous study on short chain alkylbenzenes, 6 so we begin numbering the dihedrals starting with the next dihedral (C ph -C(1)-C(2)-C(3)). Only the dihedrals that deviate from the out-of-plane all-trans structure will be specied. For example, the pgt conformer of n-butylbenzene will be referred to simply as g1, while the pgg conformer becomes g1g2 in this short-hand notation.
The relative sign of the gauche angles is also important; for this the notation g 0 # is used to denote when a gauche dihedral angle has the opposite sign of the initial g1 dihedral angle. Finally, if there is no deviation from the out-of-plane all-trans structure it will simply be denoted as all-trans.
Here, we present conformational assignments for the main observed conformers of n-pentyl, n-hexyl, n-heptyl, and n-octylbenzene, and a partial assignment of n-decylbenzene. In arriving at these assignments, we utilize a combination of methods, including (i) relative energies deduced from high-level theory, (ii) LIF spectra, (iii) single-conformation alkyl CH stretch IR spectra, and (iv) Raman spectroscopy, all carried out on jetcooled samples of the molecules in the gas phase. Each of these methods brings complementary insights regarding the conformational assignments.
As we shall see, in octylbenzene, a small electronic origin transition appears in the LIF spectrum at 37 488 cm À1 , shied distinctly to the red of those found in smaller members of the alkylbenzenes. We present evidence that this transition arises from a g1g3g4 conformer that folds the n-octyl chain back over the phenyl ring where it can interact optimally with the p cloud via multiple CH 2 (n) groups.
An essential tool in interpreting the single-conformer IR spectra is the local mode Hamiltonian model developed in the Sibert group, and applied recently to ethyl, n-propyl, and nbutylbenzene. 6 This model explicitly takes into account the strong and pervasive stretch-bend Fermi resonances that make comparison with harmonic normal mode calculations nearly impossible. We use many aspects of the model from that work without change, making at most minor modications that further rene it. As we shall see, the method is capable of capturing many of the main characteristics of the alkyl CH stretch spectra, greatly aiding assignments. They also help in interpreting the source of unique spectral signatures when they appear. Indeed, a particular strength of the method is its ability to provide useful physical insight regarding the local site frequencies of the CH oscillators and their inter-group coupling as a function of their local conguration and position along the chain. We therefore return near the end of the manuscript to consider what that model deduces about the vibrational signatures of the alkyl chains and to assess the prospects and limitations of alkyl CH stretch spectroscopy as a tool for making structural deductions on alkyl chains.

A. Experimental
The experimental setups utilized for the UV, IR, and Raman spectroscopies have been described elsewhere, 10,16 and we will only describe the specic conditions employed in this particular study. The UV and IR spectra were taken on samples entrained in 3 bar of helium and pulsed through an 800 micron orice into a vacuum, creating a supersonic jet expansion. The samples were heated from room temperature up to 110 C in order to sufficiently vaporize the samples. The Raman spectra were taken of samples heated from 43 C to 81 C and owed continuously through a slit nozzle (0.15 mm Â 4 mm) with a backing pressure of 0.5 bar of He, at a distance of 1 mm from the laser.

B. Theoretical
Conformational equilibrium distributions for the n-alkylbenzenes have been calculated on a MMFF (Merck Molecular Force Field) level using Spartan'08 v.1.2.0. 17 All conformers within a threshold of 10 kJ mol À1 relative to the global minimum structure were re-optimized and their energies and frequencies have been calculated with the B3LYP-D3BJ/def2TZVP method in Gaussian 09. 18 The def2TZVP basis set represents a good compromise between computational cost and reliable results as bigger basis sets were not feasible for n-alkylbenzenes with an alkane chain longer than 5 carbon atoms. Previous studies have provided evidence that this level of theory provides good correspondence with experiment in ordering the relative energies of conformers. 19 Harmonic vibrational frequency calculations were carried out on the full series of alkylbenzenes studied, from ethylbenzene to decylbenzene, at the same level of theory.
Due to the pervasive presence of strong Fermi resonance coupling between CH stretch fundamentals and the overtones of the CH scissors modes, the harmonic vibrational frequencies cannot be used in making assignments. As a result, theoretical IR spectra were calculated in a local mode basis that explicitly accounted for stretch-bend coupling, much as was done in the previous work on smaller chain alkylbenzenes. 6 For the alkyl chains, the model Hamiltonian was constructed from the Hessian matrix and dipole derivatives computed at the B3LYP-D3/6-311++G(d,p) level of theory at each conformer's local reoptimized geometry. The only difference between the Hamiltonian construction in this work and that of the shorter chain study is how the stretch-stretch couplings between CH stretches on different carbon atoms are treated. Although the scaling of this parameter was considered in the previous work, the presence of the phenyl ring altered the local mode stretching site frequencies of the initial CH 2 groups to the extent that there was still about a 15 cm À1 variance from carbon to carbon. In contrast, the local mode site frequencies for CH stretches in the middle of the longer chains in trans conformations are nearly degenerate, as will be seen below. The importance of the coupling between these near-degenerate sites grows with the length of the chain. In order to improve the agreement between the experimental spectrum and the theoretical model, the DFT couplings between stretches on different carbon atoms are scaled by a factor of 0.85. This adjustment appears to be transferable from chain to chain and also improves agreement between experiment and theory in the full set of conformers studied here. The use of this additional scaling on the shorter chains does not signicantly alter their model spectra, as expected given the small number of near degeneracies.

A. Review of short-chain alkylbenzenes
The increase in conformational complexity with growing alkyl chain length is apparent even in these short-chain alkylbenzenes, with S 0 -S 1 origin transitions for one, two, and four conformers observed and assigned for ethyl, propyl, and butylbenzene, 20-24 respectively (Fig. 1). The frequency of the S 0 -S 1 origin transition for individual conformers is especially sensitive to the rst dihedral angle in the alkyl chain; i.e., g1 versus t1. For instance, in butylbenzene, the difference in frequency between the all-trans and g1 conformers is approximately 62 cm À1 , with g1 lower in frequency than the all-trans structure due to the interaction of the CH n (3) group with the p cloud in the g1 conguration. Single gauche defects at other positions along the chain cause much smaller shis in the UV excitation frequency. Thus, the g1g2 S 0 -S 1 origin of butylbenzene is shied only $1 cm À1 higher in frequency than the g1 S 0 -S 1 origin, while the S 0 -S 1 origin of the g2 conformer is $2 cm À1 lower in frequency than the all-trans origin. These transitions appear as partially resolved side bands in Fig. 1, but have been better resolved in earlier studies by Simons et al. 20 The relative intensities of the S 0 -S 1 origin transitions in the LIF spectrum of butylbenzene correlate in a straight-forward manner with the relative energies for the four lowest-energy conformers of the molecule, calculated at the DFT B3LYP-D3BJ/def2TZVP level of theory. The zero-point corrected relative energies for the all-trans, g1, g1g2, and g2 are 0.0, 0.1, 2.1, and 2.4 kJ mol À1 , respectively, consistent with the experimental spectrum ( Fig. 1c) showing large transitions due to all-trans and g1, and two weaker transitions of about equal intensity due to g1g2 and g2. This shows that relative energy calculations at this level of theory can guide the choice of potential candidates for assignments.

B. LIF spectra and relative energy calculations
The LIF spectra for pentyl, hexyl, heptyl, octyl, and decylbenzene are compared with those for the short alkylbenzenes in Fig. 1. The labels in Fig. 1 were derived through the full set of techniques brought to bear on this series of molecules. The increasing complexity of the conformational landscape for the long-chain alkylbenzenes is readily apparent in the steadily increasing number of transitions in the S 0 -S 1 origin region with increasing alkyl chain length. This is not surprising, since with each additional carbon-atom added to the alkyl chain, another dihedral angle is introduced about which nominally t, g+, and gÀ congurations are possible, resulting in a geometric growth in the number of possible conformers. Fig. 2 shows the relative, harmonically zero-point corrected energies of conformers for pentyl, hexyl, heptyl, and octylbenzene calculated to be within 5 kJ mol À1 of the global minimum at the DFT B3LYP-D3BJ/def2TZVP level of theory. The all-trans structure is the lowest energy conformer for each of the molecules in this series, and all of the energies shown are relative to this global minimum. The energy level diagrams for each molecule are divided into sub-sets with an increasing number of gauche 'defects' going from le to right. The steady increase in the number of low-energy conformers is obvious from the gure, with 8, 11, 15, and 17 structures within the rst 5 kJ mol À1 in pentyl through octylbenzene. In looking at the whole series of alkylbenzenes, the calculations clearly predict that the g1 conformer is always nearly isoenergetic with the all-trans conformer, thereby bringing C(3) above one edge of the aromatic ring, where it is stabilized by a CH/p interaction. The low energy cost of this g1 defect propagates through the conformers containing two or more gauche defects, with all the lowest-energy conformers possessing a g1 defect. For this reason, we have not calculated exhaustively the full set of non-g1 conformers in the larger alkylbenzenes.
The energy level diagram for pentylbenzene, then, predicts that the all-trans and g1 conformers should possess similar starting populations in the expansion, with the g1g2 structure third most stable. Consistent with this prediction, the LIF excitation spectrum in the S 0 -S 1 origin region of pentylbenzene in Fig. 1 shows two intense bands (appearing at approximately the same frequencies as the g1 and all-trans bands for propylbenzene and butylbenzene), and a third transition which has half the intensity of larger two bands, appearing 5 cm À1 below the g1 origin, tentatively assigned to g1g2. Based on the results on butylbenzene, one might anticipate a fourth conformer, g2, to be present. However, the energy of the g2 conformer is raised to 2.5 kJ mol À1 in pentylbenzene, and so is predicted to be smaller in intensity than g1g2. We anticipate, based on butylbenzene, that the S 0 -S 1 origin transition of g2 will be close to the all-trans origin, since its rst dihedral angle is trans. It seems plausible that the g2 origin (and g3 as well) is not resolved in pentylbenzene, appearing underneath the contour due to the all-trans conformer, a conjecture that we will return to later.
The low-energy conformers of hexylbenzene are predicted to have a similar energy ordering to their counterparts in pentylbenzene, with all-trans, g1, and g1g2 minima noticeably more stable than all others. The LIF spectrum for hexylbenzene reects this close similarity with pentylbenzene, also displaying two large transitions due primarily to all-trans and g1 conformers, and a weaker-intensity band tentatively assigned to g1g2 just to the red of the g1 origin. At higher energies, the energy diagram is modied by the presence of new conformations arising from the additional dihedral associated with the lengthening of the alkyl chain (e.g., g1g 0 4, g1g4, g1g2g4, and g1g3g4). Notably, the hexyl chain in hexylbenzene is the shortest chain that can support a g1g3g4 conformer, with its chain folded back over the ring, here with calculated energy of 3.52 kJ mol À1 above the global minimum. As we shall see, there is no experimental evidence for this conformer in hexylbenzene.
The LIF spectrum of heptylbenzene differs from those of pentyl and hexylbenzene in two subtle but important ways. First, the gap in frequency between the bands tentatively assigned to g1 and g1g2 electronic origins has now widened just enough to show a small peak half way between them, at about one-third the size of the g1g2 origin. Second, a weak transition appears at 37 497 cm À1 , some 15 cm À1 red of the g1g2 origin. The carrier of this band must have a stronger interaction of the heptyl chain with the aromatic p cloud than do other conformers, leading to the additional red-shi in its origin. Therefore, there are ve resolved electronic origins to account for via the spectroscopy.
The energy level diagram for heptylbenzene ( Fig. 2) is similar to that of pentyl and hexylbenzene. The g1g 0 4 conformer is fourth in energy and therefore a candidate for one of the new transitions. The next conformer up in energy with prospects for appearing near to or red-shied from the g1 origin is g1g3. Further distinction between these possibilities will require the infrared and Raman data in the following sections. Note that there is a slight drop in energy of the g1g3g4 structure with the longer heptyl chain, but several other folded or partially folded structures compete with it in energy.
In octylbenzene, the LIF spectrum now more clearly shows the three transitions near the g1 origin. Notably, there are several small transitions red-shied from the UV transitions of the g1-like conformers, including a band with intensity similar to the central peak of the g1 triad. We shall present evidence shortly that this band is due to the g1g3g4 conformer, consistent with a precipitous drop in its relative energy to a value slightly below that of the g1g2 conformer (Fig. 2).
Finally, Fig. 1 presents an overview LIF scan of decylbenzene. While we have not studied this molecule in detail, we present its spectrum as a part of the series, since it shows a number of red-shied transitions now appearing with signicant intensity, indicating the growing presence of more conformers with strong interactions of the chain with the aromatic p cloud.

C. Fluorescence-dip infrared spectra
Using uorescence-dip infrared spectroscopy (FDIRS), infrared spectra in the C-H stretch region (2800-3000 cm À1 ) were taken of the individual conformers of pentylbenzene, hexylbenzene, heptylbenzene, octylbenzene, and a subset of the main bands of decylbenzene. As we have argued in the preceding section, the LIF spectra evolve with lengthening alkyl chain in a systematic way that enables us to sort the conformational isomers of each sized alkylbenzene into conformational families that share the same or closely analogous alkyl chain conformations. In this section, we conrm that these similarities carry over to the single-conformation IR spectra, which are t using the local mode Hamiltonian model described in Sec. II.B. Using octylbenzene as representative, we present optimized structures for every conformational family that we discuss in the sections that follow (Fig. 3). The labels on the peaks in Fig. 1 indicate the assigned structures based on the full complement of methods used. Given the importance of the folded g1g3g4 conformer, we present and discuss this structure separately.
The experimental single-conformation spectra of each sized alkylbenzene in the series are grouped by family in Fig. 4-7. The theoretical prediction of the local mode Hamiltonian model is placed above each experimental spectrum. These model results will be used in the Discussion section to analyze the changes in spectra with conformation and chain length. Here, we use these results primarily as a means of determining and/or strengthening the conformational assignments. There are certain common features of all spectra worth mentioning at the outset, to orient the reader. In every spectrum, the doublet in the 2960-2970 cm À1 region is the near-degenerate pair of asymmetric stretch transitions of the CH 3 group. These bands change very little from one sized alkylbenzene to the next. A weak band at 2883 cm À1 is also common to all spectra, assigned to the methyl symmetric stretch. These methyl transitions decrease in relative intensity down the series for the simple reason that the number of CH 2 groups in the chain grows with alkyl chain length, adding to the integrated intensity of transitions due to the CH 2 groups. The spectral regions due to the CH 2 groups that make up the alkyl chain contribute intensity primarily in two regions, 2850-2890 and 2920-2950 cm À1 . The lower wavenumber region is primarily due to the CH 2 symmetric stretches/Fermi resonances, while the higher region contains both asymmetric CH 2 stretch and the upper members of the symmetric stretch/Fermi resonances. As the length of the chain grows, when the alkyl chain is in a conformation in which many CH 2 groups are in similar environments, their site frequencies will be similar, and coupling between CH 2 groups can lead to normal modes extended over several CH 2 groups, with intensities governed by the relative phases of oscillations of the groups involved. On the other hand, if the local conguration and environment of a given CH 2 group is sufficiently distinct, as it could be in the presence of one or more gauche defects, the local mode site frequencies of each CH can shi, leading to partial localization of the modes. All-trans and g1 conformers. The out-of-plane all-trans and g1 conformers (Fig. 3) are the two dominant conformers present in the LIF spectra of every molecule in the series. The UV S 0 -S 1 origin bands for these two conformers are located at roughly the same frequency for each molecule in the series (Fig. 1), and are the most intense bands in every UV spectrum. Fig. 4a and b present single-conformation IR spectra in the 2800-3000 cm À1 region of the all-trans and g1 bands of pentyl through octylbenzene, respectively.
The series of all-trans spectra show the development of the fully-extended alkyl chain conformation with chain length. These spectra differ from those in the g1 family in fairly subtle ways, not surprisingly given the fact that a single gauche defect in g1 leads to longer and longer tracts of trans dihedrals as the alkyl chain length grows. The asymmetric methyl CH stretch transitions appear as a doublet at 2963 and 2969 cm À1 in the spectra of both conformers. The series of spectra in the two families differ most noticeably in the 2850-2870 cm À1 region, where both have a set of two experimentally resolved bands due to the CH 2 groups whose relative intensity differences are   accurately predicted by the anharmonic model calculations. The calculations also match the developments of the spectra in the middle region of each spectrum (2920-2950 cm À1 ) with good accuracy. The quality of the overall ts is sufficient to give condence to the assignments of the two main bands in the LIF spectra to the all-trans and g1 conformers. As we can see, small differences between experiment and theory are accounted for, at least in part, by small contributions from other minor conformers whose UV transitions overlap with these main bands (Fig. 4a).
g1g2 conformers. The S 0 -S 1 origin bands tentatively assigned to the members of the g1g2 conformational family are the third largest transitions in each of the UV spectra, appearing just below the g1 origin, and slightly lower in frequency (À9 cm À1 ) than the assigned g1g2 origin in butylbenzene. The infrared spectra for the g1g2 conformers, shown in Fig. 4c, are in many ways similar to those of their all-trans and g1 counterparts. However, the g1g2 spectra differ in two characteristic ways from those in Fig. 4a and b. First, a new band appears at 2950 cm À1 , with an intensity that is relatively strong at shorter chain lengths, and somewhat weaker in longer chains, as would be expected of a CH 2 transition. The frequency of this transition is shied into the gap between the main asymmetric stretch CH 2 transitions and the methyl doublets. This band is also present in the theoretically predicted spectra, arising principally from the rst CH 2 group in the alkyl chain, the benzylic CH 2 . Second, the symmetric stretch for this same benzylic CH 2 group is similarly shied to higher frequency than its counterparts, producing a third band, that is weak, but clearly visible in the experimental spectra at $2874 cm À1 , just below the CH 3 symmetric stretch band. The theoretical model also predicts the presence of this shi, but slightly overestimates its magnitude. These characteristic features of the infrared spectra of the g1g2 conformer provide condence in the assignment of the g1g2 conformer to the third major band in the UV spectra (Fig. 1).
g1g 0 4 conformer. Heptylbenzene is the shortest molecule in the series for which a band lower in frequency than the g1g2 S 0 -S 1 origin band (Fig. 1) is present with enough intensity that its infrared spectrum could be taken. As the conformer next in energy aer g1g2 (Fig. 2), the g1g 0 4 conformer (Fig. 3) is a leading candidate for the carrier of this spectrum. The FDIR spectrum recorded while monitoring uorescence from this band (Fig. 5) looks generally similar to those observed for the previous conformers: the CH 3 stretch fundamentals are present at the same frequencies, there is a signicant buildup of bands in the 2920-2950 cm À1 region due to the CH 2 asymmetric stretches, and there are three main peaks in the low frequency region of the spectrum due to the symmetric stretches. The most signicant difference between the g1g 0 4 spectrum and that of the previous conformers is the presence of the band at 2910 cm À1 . No analogous strong band is present in the spectra of other conformers, making the transition a signature of the g1g 0 4 conformer, as the g1g 0 4 theoretical spectrum is the only calculated spectrum with a band in this region.
The model calculations in Fig. 5 show a reasonable correspondence with experiment, although the intensity patterns are not fully captured by the model. For instance, the theoretical spectrum predicts a strong band at 2950 cm À1 , which is present in octylbenzene's spectrum, but appears only as a shoulder in heptylbenzene. Despite these deciencies, the unique nature of the band at 2910 cm À1 , when combined with the predictions of the energy calculations, suggests the tentative assignment of the g1g 0 4 structure to the 37 498 cm À1 band of heptylbenzene. In octylbenzene, the corresponding transition closest in UV wavelength to its partner in heptylbenzene was not recorded due to its weak intensity. As we shall see shortly, the band immediately to the blue is a vibronic band of the g1g3g4 turn.
g1g3/g1g4. The h unique S 0 -S 1 origin transition observed in the alkylbenzene series is the small peak located at 37 515 cm À1 between the g1g2 and g1 UV S 0 -S 1 origins (Fig. 1). This UV transition is rst observed in hexylbenzene, but the rst molecule in which it is sufficiently isolated for FDIR spectroscopy is heptylbenzene. The infrared spectra for this band in both heptylbenzene and octylbenzene are shown in Fig. 6, showing their close similarity. Unfortunately, the FDIR spectra lack much by way of unique transitions, preventing a completely rm assignment. Given the close proximity of the electronic origin to the g1 and g1g2 origins, we anticipate that the conformer of interest has g1 as its rst dihedral, with only weak additional interactions with the aromatic ring. The relative energy calculations (Fig. 2) predict that the g1g3 and g1g4 conformers are next highest in energy. Indeed, the calculated spectra in Fig. 6 contain equal contributions from g1g3 and g1g4, leading to a reasonable t with experiment.
The rst folded conformer: g1g3g4. As noted previously, the LIF spectrum of octylbenzene presents a unique S 0 -S 1 origin, which is shied to the red of all others appearing at 37 488 cm À1 , À92 cm À1 from its all-trans counterpart. This shi suggests a stronger interaction of the alkyl chain with the aromatic ring. At the same time, the B3LYP-D3BJ/def2TZVP calculations predict that the energy of the g1g3g4 conformer drops to within 0.98 kJ mol À1 , putting it lower in energy than the g1g2 conformer (Fig. 2). The FDIR spectrum of this band in octylbenzene is shown in Fig. 7a, where it is compared with the predictions of the theoretical model. The experimental spectrum shows several unique features that set it apart from others. First, the number of resolved bands in both symmetric stretch and asymmetric stretch regions is signicantly greater than in other conformers. Second, a strong transition appears at 2950 cm À1 , which is faithfully reproduced by the calculations. This band has been associated with adjacent gauche defects, as is indeed the case in g1g3g4. The theoretical model also correctly predicts the presence of three main bands in the 2920-2950 cm À1 region, as well as the weak bands in the 2900-2920 cm À1 region, which are unresolved but clearly present in the experimental spectrum. Finally, the theory correctly predicts the much larger number of unique transitions in the 2850-2880 cm À1 region, where other conformers had only three symmetric stretch bands. When combined, the close agreement of the theoretical model with the experimental spectrum, the prediction that g1g3g4 is now a low-energy conformer, and the shi of the electronic origin well below that of all other conformers, provide the basis for a rm assignment of this band to the g1g3g4 conformer of octylbenzene. As Fig. 3 shows, this conformer has the alkyl chain folded back over the aromatic ring where it can interact with it strongly, stabilizing its energy and leading to its unique spectral characteristics in both the UV and IR. Fig. 7b presents the analogous spectrum of the band in octylbenzene at 37 502 cm À1 , shown in the inset of Fig. 2. Its spectrum is identical to that at the g1g3g4 origin, consistent with it being a vibronic band, appearing due to Franck-Condon activity in a low-frequency mode involving motion of the alkyl chain against the p cloud, as one might anticipate following p-p* excitation.

D. Raman spectroscopy
While considering the LIF spectra in Section III.B, we noted the potential for conformers such as g2 or g3 to have S 0 -S 1 origins in the UV that are unshied from those of the all-trans parent, and therefore would be inaccessible to study without interference from the all-trans counterpart, which is signicantly more highly populated. In order to test this conjecture more directly, Raman spectra of the low frequency Stokes region of hexylbenzene through decylbenzene were recorded in Göttingen, recognizing that the low-frequency vibrations are likely to be more readily uniquely identied. Importantly, these spectra are not conformation-specic, containing contributions from all conformers present in the expansion. The resulting Raman spectra over the 150 to 550 cm À1 vibrational excitation region for hexylbenzene and heptylbenzene are presented in Fig. 8, with the corresponding spectra of octyl and nonylbenzene included in ESI. † In all cases, comparison is made between the experimental spectra and stick spectra that report the relative Raman intensities and unscaled wavenumber positions for the full set of low energy conformers of each molecule, calculated at the same DFT B3LYP-D3BJ/def2TZVP level of theory used throughout this manuscript. Calculated Raman activities A k and depolarization ratios P k were converted into parallel and perpendicular polarization fractions of the scattered light and the former attenuated by a factor of 1.5 +ñ k /0.0002 cm À1 due to the empirical transmission properties of the monochromator. From this corrected Raman activity A cor k , Raman scattering cross sections were calculated according to ref. 10. An average vibrational temperature of 100 K was assumed for hot band contributions. The cross sections were further weighted by estimated abundances based on rigid rotor harmonic oscillator Gibbs energies at 298 K, assuming that the population was not relaxed substantially from that in the nozzle.
The calculated stick spectra of the three lowest energy conformers, all-trans, g1, and g1g2, provide remarkably accurate predictions for most of the major bands observed in hexylbenzene; however, there are a few bands, notably those around 255, 315, and 485 cm À1 , marked with asterisks in the gure, that are not accounted for using only the three major conformers. These bands are accounted for if we include the g1g 0 4 structure, as well as the single gauche conformers g2 and g3. This lends credibility to the idea that the S 0 -S 1 origin bands for some of the single gauche conformers, g2 and g3, are present as minor conformers in the supersonic free jet, with S 0 -S 1 origin transitions unshied from their all-trans counterparts.
Heptylbenzene shows this same trend, requiring the single gauche conformers g2 and g3 for the assignment of multiple bands in the Raman spectrum (e.g., 245, 275, 387 cm À1 ). There is some argument to be made for the g1g3g4 conformer providing the best match with a couple of weak bands in this heptylbenzene spectrum; however, there are no strong bands that require it, and as such we do not claim its presence in heptylbenzene.
The Raman spectra for octylbenzene and nonylbenzene are shown in the ESI (Fig. S1 and S2 †). The spectral congestion associated with the increasing chain length makes it progressively more difficult to make rm conformational assignments of many of the weak bands in the Raman spectrum. However, in octylbenzene, there is some evidence for folded structures like g1g3g4 being present, most notably, in the region around 275 cm À1 and at 420 cm À1 , albeit with low intensity.

IV. Discussion
The primary motivation for this work was to examine the conformational preferences of longer alkyl chains linked to an aromatic ring in the prototypical case of the n-alkylbenzenes. Using a combination of LIF excitation spectra, singleconformation IR spectra in the alkyl CH stretch region, Raman spectroscopy, and dispersion-corrected DFT calculations, our results on pentyl through octylbenzene have shed light on three important issues: (i) the evolution of the conformational landscape of alkylbenzenes as the alkyl chain length increases, (ii) the earliest appearance of a folded structure in straight chain alkylbenzenes, and (iii) the spectroscopic signatures and CH stretch site frequencies of specic conformations, as revealed by the anharmonic local mode Hamiltonian model used to assign the spectra.

A. Conformational preferences of the alkyl chain in alkylbenzenes
General features of the conformational landscape. In this series of alkylbenzenes, we see a steady increase in the number of resolved conformations as the chain length increases. The UV spectrum is itself a sensitive indicator of the interactions of the chain with the phenyl ring: the all-trans conformer (Fig. 3) has its S 0 -S 1 origin furthest to the blue in the S 0 -S 1 UV spectrum (Fig. 1), while the g1 conformer, with a single gauche defect about the rst alkyl chain dihedral, results in a red-shi of 62 cm À1 in its origin band, almost independent of the length of the all-trans alkyl chain that follows this gauche defect. These two electronic origins are nearly the same size, indicating similar populations, and consistent with the B3LYP-D3BJ calculations, which show the g1 conformer nearly isoenergetic with all-trans. By contrast, in pure alkane chains, isolated gauche defects raise the energy of the chain by $2.5 kJ mol À1 . As Fig. 2 shows for octylbenzene, CH 2 (3) engages in a stabilizing CH/p interaction, which affects the UV and lowers the energy of g1 so that this rst gauche defect can occur with no energetic penalty.
Gauche defects that occur at positions further down the alkyl chain are energetically more costly. As expected based on the pure alkanes, the single-gauche conformers g2, g3, etc., are 2.5-3.0 kJ mol À1 less stable than the all-trans and g1 conformers. The energy level diagrams in Fig. 2 are divided into sub-groups differing in the number of gauche defects, with the lowest energy structures with 2, 3, and 4 gauche defects in heptylbenzene having energies 1.2, 2.9, and 3.6 kJ mol À1 less stable than the global minimum, indicating a degree of stabilization of more tightly folded structures.
Over the entire pentyl-to octylbenzene series, the g1g2 conformer is third lowest in energy, appearing 1.2-1.5 kJ mol À1 above the global minimum (green line in Fig. 2). Its S 0 -S 1 origin appears À6 cm À1 from the g1 origin, shied slightly due to the reorientation of CH 2 (3) in accommodating a second gauche dihedral of the same sign. The stabilization of adjacent gauche defects of the same sign is also characteristic of pure alkanes, and is referred to as the 'positive pentane effect', since it appears rst in pentane. By contrast, g1g 0 2 has a calculated energy 5.6 kJ mol À1 above the global minimum, destabilized by 4.0 kJ mol À1 compared to g1g2 (and therefore above the energy cut-off in Fig. 2) due to steric effects between C i and C i+4 , where C i is the rst carbon involved in the gauche defects, when adjacent gauche defects have opposite sign. In the infrared, the g1g2 conformer possesses a characteristic transition at 2950 cm À1 , showing up in the gap between the CH 2 asymmetric stretch (AS)/symmetric (SS) FR peaks (2920-2940 cm À1 ) and the methyl AS doublet (2963/2969 cm À1 ).
Beginning with hexylbenzene, the g1g 0 4 conformer (Fig. 3) is next in energy (2.3 kJ mol À1 , Fig. 2), stabilized slightly compared to its g1g4 counterpart, which is at an energy (2.7 kJ mol À1 ) expected of single gauche defects in pure alkyl chains. The slight stabilization of g1g 0 4 relative to g1g4 is opposite to that found in next-nearest-neighbor gauche defects (e.g., g1g 0 3 higher in energy than g1g3), suggesting that the g1g 0 4 alkyl chain gains additional stabilization from dispersive interactions with the p cloud, perhaps transmitted from C(3) to C(6) (see Fig. 2). 7 The g1g3g4 fold in octylbenzene. Arguably the most important nding of the present work is the detection and characterization of the g1g3g4 fold, rst appearing with measurable intensity in octylbenzene. The work of Suhm and co-workers on pure, straight-chain alkanes presented evidence of a folded structure utilizing a (g iÀ2 , g iÀ1 , t, g i+1 , g i+2 ) hairpin motif beginning at approximately n ¼ 17/18, with hairpin structures quickly becoming the dominant conformational motif above n ¼ 20. 10 In all of the straight-chain alkanes with n < 20, the fully extended all-trans structure is the main conformational motif. In order to maximize dispersive attractions between the two legs of the hairpin, the fold occurs at or near the center of the chain, so that the two legs are nearly equal in length.
The alkylbenzene series appears to follow the same trend, with extended structures with either no gauche defect (all-trans) or a single gauche defect about the C(1)-C(2) bond (g1) dominating the conformational distribution up to heptyl and octylbenzene. The LIF spectra of undecylbenzene and dodecylbenzene (Fig. S3, ESI †) show signicantly increased absorption intensity in transitions to the red of the main bands, where folded structures are anticipated to appear, suggesting a rapid increase in the population of folded structures similar to that observed in the pure alkanes.
The shortest chain alkylbenzene in which a folded structure is observed is signicantly shorter than the rst observed folded structure of the pure alkanes, with the alkylbenzenes rst folding at a chain length of 8 (octylbenzene), approximately half the length of the rst fold in the pure alkanes (Fig. 8). There are two main differences between the alkylbenzenes and alkanes that result in the earlier folding in the former case.
First, the energetic cost of the turn is signicantly reduced when it begins immediately adjacent to the phenyl ring. The reader will recall that in pure alkanes, relative to an all-trans structure, each gauche defect raises the energy by approximately 2.5 kJ mol À1 , with the four-gauche turn thereby requiring up to 10 kJ mol À1 , due to the pentane effect. This destabilization is compensated by the stabilization associated with the dispersive attractions between the all-trans segments on either side of the turn, which the turn brings into perfect alignment with one another, as shown in Fig. 9a. In octylbenzene, the g1g3g4 turn has the C(ortho)-C(ph)-C(1)-C(2) dihedral nominally perpendicular. However, its actual value is 67 , so that a more proper label might be 'g0g1g3g4' if we label this dihedral '0' using our nomenclature, which is quite close to its pure alkane ideal of 60 . Thus, it is in effect the same turn as in the pure alkanes, as shown in Fig. S4, † where the two structures are overlaid on one another. Since the out-of-plane orientation of the alkyl chain is common to all low-energy structures of the alkylbenzenes, the 'g0' defect is not actually a defect, but a distinct preference. Furthermore, the energy of the g1 conformer is nearly isoenergetic with all-trans, indicating that the C(ph)-C(1)-C(2)-C(3) dihedral occurs at no cost in energy, due to the stabilizing interaction of CH 2 (3) with the aromatic p cloud (see Fig. 3). The two remaining gauche defects, g3 and g4, are on adjacent carbons and are of the same sign, reducing their energy slightly relative to non-adjacent defects. In essence, the conformational energy penalty is reduced by a factor of two compared to alkanes.
Second, formation of the turn brings the alkyl chain back over the aromatic ring where it can experience dispersive interactions with the p cloud at C(5)-C(8), as shown most clearly in the top view of the structure in Fig. 9b. In this sense, the phenyl ring substitutes for one leg of the all-trans chains, but provides a set of CH/p type C/C interactions that are stronger than those between alkyl chains. In addition, the aromatic ring itself is less restrictive in its requirements on the turn, providing a wider swath of angles for stabilization of the single alkyl chain.
As Fig. 2 shows, the g1g3g4 conformer drops from 3.6 kJ mol À1 above the global minimum in hexylbenzene to 2.9 kJ mol À1 in heptyl-, and on down to 1.0 kJ mol À1 in octylbenzene, where it is rst clearly observed experimentally. This makes clear that the stabilization provided by the ring is a cumulative effect due to interactions that extend beyond C(6), which is nearly ring-center, to C(7) and C(8) that interact primarily with the edges of the ring (Fig. 9b).
Entropy effects and equilibrium populations. One initially puzzling aspect of the identication of the g1g3g4 conformer in octylbenzene is the weak intensity of the transitions in the LIF spectrum ascribed to this conformer, given its calculated relative energy only 1.0 kJ mol À1 above the global minimum, nearly isoenergetic with the g1g2 conformer. While there are many reasons that could contribute to lack of correspondence between S 0 -S 1 origin intensity and the fractional abundances (e.g., differences in Franck-Condon activity, or S 1 uorescence quantum yield), these appear to be minor in the alkylbenzenes in that low-frequency vibronic activity is typically small, and measured S 1 lifetimes are nearly identical. Contributions from conformers whose electronic origin transitions are unresolved also needs to be taken into account, but changes the results only modestly. Even aer taking account of these effects and the unusually intense low-frequency Franck-Condon progression in g1g3g4 (marked by a tie line in Fig. 1), the integrated intensity of the g1g3g4 conformer is surprisingly small given its low relative energy. This is also conrmed by the Raman spectra up to nonylbenzene (ESI †), which do not show major contributions from g1g3g4, either.
However, the tight fold of the g1g3g4 conformer leads to an entropic penalty that signicantly reduces its equilibrium population at the pre-expansion temperature. Indeed, as Table  S5 in ESI † shows, the relative Gibbs free energy of g1g3g4 at 298 K, DG(298), is 6 kJ mol À1 above the all-trans free energy global minimum. If the barriers separating conformers of the alkyl chain are large enough relative to kT (2.48 kJ mol À1 at 298 K), the pre-expansion populations will be essentially frozen in during the cooling in the expansion. We have calculated select barriers involving isomerization about single C-C bonds, and nd them to be in the 12-15 kJ mol À1 range (about 5kT), and consistent with the work of Klauda et al. 25 on pure alkanes. Thus, we anticipate that the downstream populations in the expansion will partially reect the equilibrium populations prior to expansion.
B. Interpreting the alkyl CH stretch spectra via the model One of the particular strengths of the anharmonic local mode Hamiltonian model used to model the single-conformer alkyl CH stretch infrared spectra is that it provides a ready means of extracting physical insight regarding the major factors contributing to unique IR bands appearing in the spectra. A rst level of understanding develops simply from consideration of the uncoupled site frequencies for each of the CH stretch oscillators in the alkyl chains. These appear as diagonal elements in the Hamiltonian matrix that contains entries for each of the CH fundamentals and scissors overtones and combination bands.
Site frequencies and spectroscopic signatures in the all-trans conformers. The high symmetry of the alkyl chains in the alltrans conformers makes them a natural starting point for interpretation via the model, since they give rise to particularly simple spectra (Fig. 4a) with a common set of transitions whose intensities change smoothly with increasing alkyl chain length. We have also recorded the FDIR spectrum of the all-trans conformer of n-decylbenzene, shown in Fig. 10a, since this long chain has nine CH 2 groups that more nearly reect the longchain limit for the all-trans series. One initially puzzling aspect of the spectrum of decylbenzene is the presence of two dominant transitions in the symmetric stretch asymmetric stretch region (2920-2940 cm À1 ) rather than the single transition expected of an innite all-trans chain. Deeper insight into the origin of each of the peaks can be found via a dipole decomposition, much as was done for propyl and butylbenzene spectra in earlier work. 6 In those cases, the dipole decompositions were obtained by computing a series of model spectra in which only one CH 2 or CH 3 group's local mode stretches were allowed to carry oscillator strength. However, since the all-trans conformer of n-decylbenzene contains numerous consecutive CH 2 groups that are nearly equivalent, a dipole decomposition that examines one CH 2 group at a time misses the important constructive and destructive interferences between groups that lead to the nal spectrum.
Thus, in the all-trans conformers, we selectively extract components due to the symmetric or asymmetric stretches rather than individual CH 2 groups. The dipole decomposition in these terms is shown in Fig. 10a, in which the two intense features in the 2920-2940 cm À1 region are primarily due to two bright asymmetric stretch fundamentals. Since the asymmetric stretches are not Fermi-coupled, the nature of these two bright states can be elucidated from this more nearly normal mode picture. The higher-frequency asymmetric stretch bright state involves contributions primarily from the two CH 2 groups immediately adjacent to the phenyl ring (Fig. 10b), with diminishing in-phase contributions from the remaining CH 2 groups further down the chain. The vibration responsible for the other bright state, about 25 cm À1 lower in frequency, comes from the in-phase asymmetric stretches from the remaining set of CH 2 groups further down the chain remote from the phenyl ring or CH 3 group. These stretches are out of phase with the phenyl-adjacent CH 2 , ensuring orthonormality of the states. We see then, that the primary reason that there are two bright asymmetric combinations instead of one (as would be anticipated in a simple one-dimensional Hückel model) is due to edge effects. The phenyl ring raises the local mode frequencies of the rst two CH 2 groups sufficiently to lead to a splitting of the bright states in two.
The site frequencies in the all-trans CH 2 groups as a function of position relative to the phenyl ring are shown in Fig. 11a for the full set of alkylbenzenes of interest here, from n-pentyl through n-decylbenzene. Since the two CH groups on each carbon atom are in equivalent positions in the all-trans conformers, a single site frequency is associated with each CH 2 (n). The edge effects are immediately apparent from the gure. On the phenyl ring end of the alkyl chain, the benzylic CH 2 (1) and CH 2 (2) are shied to higher wavenumber to 2912 and 2904 cm À1 , respectively, +23 and +15 cm À1 above the value of the central CH 2 groups in the chain (2889 cm À1 ). Similarly, the methyl group affects a single CH 2 group immediately adjacent to it, which is characteristically at 2898 cm À1 , a +9 cm À1 shi. Thus, in the alkylbenzenes, the number of CH 2 groups unaffected by edge effects is three shorter than the CH 2 total and four shorter than the number of carbon atoms in the alkyl chain as a whole (e.g., 6 CH 2 groups in decylbenzene).
The difference in site frequencies depicted in Fig. 11a translates directly into the degree of delocalization of the asymmetric CH 2 stretch fundamentals, splitting up the alkyl chain into the pair nearest to the phenyl ring, the central CH 2 groups, and the single CH 2 adjacent to the terminal CH 3 group. Coupling between CH 2 groups on the two edges is negligible, while even minor inter-CH 2 coupling leads to delocalization of the vibrations in the unperturbed central group. The all-trans conformers thus enable renement of the magnitude of the scaling stretch coupling between different carbons, as mentioned in the Theoretical methods section. In the all-trans conformer of n-pentylbenzene, there is a single 'central' CH 2 (3), and the four AS CH 2 modes divide into the benzylic coupled pair (which constructively interfere to dominate the spectrum), and two single CH 2 groups at lower wavenumber. As the number of nearly equivalent CH 2 groups grows, the bright AS CH 2 band at lower frequency grows in intensity, as anticipated, until it dominates the spectra for the longest alkyl chains, as shown in Fig. 10a for n-decylbenzene. Similar arguments hold for the bright pair of symmetric stretch fundamentals (2862 and 2869 cm À1 ), with the added complication of the Fermi resonances with the scissors overtones.
C. Site frequencies and spectroscopic signatures for gauche defects and the g1g3g4 turn Fig. 11b presents the analogous local mode site frequencies for individual CH oscillators of the g1, g1g2, g1g 0 4 and g1g3g4 conformers of octylbenzene. The all-trans results are included in the graph, connected by a solid line, in order to facilitate ready comparison with this limiting case. The g1 conformer follows the same trends as in all-trans, except for the CH group involved in the CH/p interaction (CH(3)), which is shied up in frequency by 23 cm À1 to 2913 cm À1 , a value close to that in CH 2 (1). This frequency increase has been noted in several other contexts in which CH groups are involved in CH/X interactions with an electron-rich acceptor (e.g., O, N, halogen), commonly referred to as a 'blue-shied hydrogen bond'. 7 Here we see that this 'blue-shi' carries over to intramolecular interactions between an alkyl chain and an aromatic p cloud. The presence of the g1 defect thus extends the number of coupled CH groups on the phenyl end of the chain by an additional CH, but doesn't otherwise shi the frequencies of the bright CH stretch modes appreciably. This leads to spectra for the g1 conformers that are surprisingly similar to their all-trans counterparts (Fig. 4b).
The g1g2 conformer is the rst and lowest-energy example of a structure in which two adjacent gauche defects are present. In this conformer, the CH(1) oscillator on the same side as the alltrans segment of the carbon backbone, has its vibrational site frequency pushed up to 2935 cm À1 , +46 cm À1 above the typical mid-chain all-trans CH 2 (2889 cm À1 ). This large shi can largely be attributed to a steric effect between the two CH stretches on C1 and C4, respectively. The distance between these H atoms is about 2.31Å. In the all-trans case, the phenyl-adjacent local mode site frequencies are both 2911 cm À1 , so the steric interaction between the C1 and C4 CH stretches shis the frequency by an additional 24 cm À1 on the C1, and a corresponding shi up to 2910 cm À1 is seen on its steric partner. This leads to a characteristic IR transition at 2950 cm À1 that is the clearest spectral signature of the presence of adjacent gauche defects.
The g1g3g4 turn structure shows several characteristic spectroscopic signatures that set it apart from all other conformers of octylbenzene, including a well-resolved band at 2955 cm À1 , a triad of peaks in the CH 2 AS region, greater absorption intensity in the 2900-2920 cm À1 region, and a set of ve well-resolved transitions in the CH 2 SS region. While most of the transitions are mixtures of contributions from several CH 2 groups, the site frequencies for g1g3g4, shown in Fig. 11b, reect the unique environments of the CH 2 groups in the turn structure and contribute to a greater degree of localization of the CH 2 stretch modes than in the non-turn structures. The unique site frequencies are most notable in the C(1)-C(3) series involved in the turn, where one of the CH groups is pushed up in frequency from 2918 to 2927 to 2935 cm À1 . The 2935 cm À1 site frequency is a result of the strong CH/p interaction of CH 2 (3), and contributes most (coefficient of 0.73) to the 2955 cm À1 transition in the full spectrum. The site frequency of CH 2 (2) is shied up in frequency due to a C(1)-C(2) dihedral of 65.7 , and is primarily responsible for the strong band at 2947 cm À1 in the full spectrum. Similar to the effects in the g1g2 spectra, the site frequency is shied up due to steric interactions. Here the shortest H-H distance is between the C(2) and C(5) sites at 2.16Å. Interestingly, both of the C(5) site frequencies are shied up from their all-trans conformer value of 2890 cm À1 ; the C(5) CH stretch that is close to the C(2) is shied up to 2902 cm À1 , but the other site frequency associated with the CH stretch that points away from the ring is also shied up to 2898 cm À1 . Importantly, CH 2 (6) is also shied to high frequency (2924 cm À1 ), and contributes to the middle band of the CH 2 AS triad. This shi to higher frequency arises from a second strong CH/p interaction, since CH 2 (6) sits directly over the middle of the phenyl p cloud. This shi contributes to a localization of the CH 2 vibrations in the remaining trans segments of the alkyl chain (CH 2 (4), CH 2 (5), CH 2 (7)), which also leads to several prominent, distinct features in the 2900-2920 cm À1 region, similar to what the localization did for the signature peak in the heptylbenzene g1g 0 4 conformer. Several of the features discussed here for the g1g3g4 turn are reected in extra CH Raman intensity for folded structures observed for the longer pure alkanes, in particular between 2900 and 2950 cm À1 (Fig. 11 in ref. 10).

V. Conclusions
The present study used a combination of electronic frequency shis, single-conformer alkyl CH stretch infrared spectra, dispersion-corrected DFT energies, and low-frequency Raman spectra to assign the observed UV transitions to specic conformers of alkylbenzenes in the size range from pentyl to octylbenzene. The FDIR spectra presented an opportunity to apply and rene the local-mode based anharmonic model of the alkyl CH stretch/scissor overtone region.
The alkylbenzenes are challenging molecules on which to apply single-conformation spectroscopy, since the IR-UV double resonance methods used require unique UV transitions to obtain truly conformation-specic IR spectra. The S 0 -S 1 origins are sensitive to the rst dihedral, but increasingly insensitive to gauche defects further from the aromatic ring. This causes small contributions from higher-energy conformers to contribute to some of the spectra.
However, a primary goal of the present work was to identify and characterize folded chain structures in which the chain comes back over the phenyl p cloud. This additional interaction with the aromatic ring shis the S 0 -S 1 origin of turn structures to the red of the all-trans and g1 conformer origins, where single-conformer spectroscopy is possible without interference. In octylbenzene, a UV transition shied À92 cm À1 from the alltrans origin was assigned to the g1g3g4 turn. Its infrared spectrum was unique in several respects due to the shis to higher frequencies of several of the CH site frequencies, which led to greater localization of the CH 2 transitions than in most other conformers.
It will be interesting to see how this and competing turn structures evolve with increasing alkyl chain length. Cursory LIF spectra of decyl, undecyl, and dodecylbenzene show a number of transitions shied well to the red of the non-folded electronic origins, motivating future work to characterize them.