Co/NHPI-mediated aerobic oxygenation of benzylic C–H bonds in pharmaceutically relevant molecules† †Electronic supplementary information (ESI) available: Screening data, experimental protocols, characterization data. See DOI: 10.1039/c6sc03831j Click here for additional data file.

A new method for Co/NHPI-catalyzed aerobic C–H oxygenation shows excellent tolerance of electronically diverse heterocycles.


Introduction
Liquid-phase radical-chain autoxidation reactions are amongst the largest-scale oxidation reactions performed in industry (Scheme 1). 1 Prominent examples include the Co/Mn/Br-catalyzed oxidation of p-xylene to terephthalic acid in variations of the Mid-Century process (Scheme 1B), 2 autoxidation of cumene en route to phenol and acetone in the Hock process (Scheme 1C) 3 and radical-chain autoxidation of cyclohexane to a mixture of cyclohexanone and cyclohexanol ("KA oil", Scheme 1D). 4 In contrast to these prominent large-scale applications, aerobic oxidations and radical autoxidation reactions, in particular, are rarely used for the production of pharmaceuticals or related complex molecules.
A number of groups have recently reported methods for aerobic oxygenation of benzylic C-H bonds 5,6 (Scheme 2A). The reactions are oen compatible with heterocycles and other heteroatom-containing functional groups, suggesting they could be well suited for use in pharmaceutical applications.
Further studies have shown that heterocycles can play an important role in promoting the reaction by facilitating formation of an enamine or related tautomer that is more susceptible to aerobic oxygenation (Scheme 2B). 7 In a representative example, Maes and coworkers developed a copper-catalysed oxygenation method, in which they contrasted successful oxygenation of 2-and 4-benzylpyridine with the poor reactivity of 3-benzylpyridine. 6e A subsequent mechanistic study provided evidence for a heterolytic C-H cleavage pathway and the involvement of the benzylpyridine enamine tautomer (Scheme 2B). 6l The "heterolytic" C-H oxygenation reactions show broad synthetic appeal, but the mechanism limits their utility to substrates with relatively acidic benzylic C-H bonds. In this context, we sought an alternative method that could bypass this limitation, and our attention was drawn to the N-hydroxyphthalimide (NHPI)-based C-H oxygenation reactions. 8 In the 1990s, Ishii and coworkers showed that use of redox-active metal salts, such as Co(OAc) 2 , in combination with O 2 enable efficient conversion of NHPI into the phthalimido-N-oxyl (PINO) radical. 9 PINO then mediates selective abstraction of weak C-H bonds (Scheme 3) to generate an organic radical that can react with O 2 to afford the oxygenated products. 10 This methodology has been demonstrated in numerous oxidation reactions, including industrial applications, 8 but the vast majority of studies have focused on simple hydrocarbon substrates. 11 Here, we explore Co/NHPI-catalyzed benzylic 12 oxygenation reactions of substrates bearing common heterocycles, such as pyridines, benzimidazoles and thiophenes, and benzylic ketones are oen obtained in good-to-excellent yield. Notably, the radical autoxidation pathway enables oxygenation of non-acidic substrates that are ineffective with catalyst systems that mediate oxygenation via a heterolytic pathway. For reactions that appear to be inhibited by heterocycle chelation to the Co co-catalyst, we show that a Co-free, electrochemical NHPI-mediated method offers a promising alternative approach. Finally, we demonstrate the practicality and scalability of the Co/NHPI catalytic conditions in the multigram synthesis of a pharmaceutical intermediate.

Results and discussion
We began our studies by evaluating the oxygenation of 3-ethylpyridine (1a) to 3-acetylpyridine (2a) ( Table 1). This reaction is expected to be problematic for many of the recently reported oxygenation methods. First, we used Co(OAc) 2 as the cobalt source and compared solvents that have been considered previously in Ishii-type oxidation reactions (entries 1-4). 13 A superior yield was obtained using EtOAc (entry 1), and a similar yield was obtained with the higher boiling ester solvent, n-BuOAc (entry 5). The identity of the counterion in the CoX 2 co-catalyst had a marked effect on catalytic efficiency (entries 5-10). The best yields were obtained with Co(OAc) 2 $4H 2 O and other Co II -carboxylate salts (see Tables S1 and S2 in the ESI † for full screening data). Use of BuOAc solvent enabled access to higher reaction temperatures (entries 9 and 10), and an excellent yield of 2a was achieved at 90 C (94%, entry 10).
A comparison of the optimized Co/NHPI reaction conditions with previously reported benzylic oxygenation methods in Scheme 3 Simplified mechanism depicting C-H abstraction by phthalimido-N-oxyl (PINO) and radical oxygenation by O 2 .   Poor yields and mass balances were obtained using two Mid-Century-type radical autoxidation methods (entries 1 and 2), 14 in which a bromine radical is proposed to participate in the H-atom abstraction step. We also tested representative catalyst systems 6e for "heterolytic" aerobic C-H oxygenation, corresponding to the methods noted in Scheme 2. As expected from the precedents, 3-ethylpyridine 1a is not a viable substrate with these catalyst systems (entries 3 and 4). 15 The optimized reaction conditions were then tested for aerobic oxygenation of a number of pharmaceutically relevant (hetero)arene substrates (Table 3). 16 In general, pyridines are well tolerated, with good-to-excellent yields obtained for products 2a-f. This collection of substrates includes 3-substituted pyridine derivatives (1a, 1c, 1f), which are ineffective with heterolytic C-H oxygenation methods, as well as 2-and 4-substituted pyridines, which are compatible with the heterolytic methods. Excellent yields were obtained for the benzimidazole derivatives 1g and 1h. Ethylbenzene derivatives bearing remote heteroatom-containing functional groups, including a pyridyl, an imidazole and an acetamide group (1i, 1j and 1k), also underwent successful oxygenation.
The standard reaction conditions in Table 3 proved to be ineffective for certain substrates, 17 and two different approaches were identied to address some of these limitations. In the rst case, the simple hydrocarbon, n-butylbenzene (1l) ( Table 4), as well as the sulphur-containing heterocyclic substrates 1m, 1n and 1o (Table 5) led to poor results (42%, 3%, 7% and 31% yields, respectively). In the reaction of 1l, benzoic acid was observed as the major side product, arising from cleavage of the alkyl chain. Subsequent empirical studies showed that use of pyridine as a co-solvent attenuated this alkyl chain cleavage and enabled higher yields and mass balance in the oxygenation of 1l. The optimal 7 : 3 BuOAc : pyr solvent mixture (77% yield of 2l, entry 4) proved to be similarly benecial for the oxygenation of the sulphur-heterocycle substrates 1m, 1n and 1o, as well as the N-methylated benzimidazole 1p (Table 5). 18 The latter substrates underwent oxygenation in 65%, 50%, 72% and 94% yields, respectively. The reactions with pyridine co-solvent have a dark red color, consistent with pyridine coordination to cobalt. 19 We speculate that this coordination might attenuate unproductive cobalt-mediated side reactions in these substrates.
The second case involved 2-ethylpyridine (1q) and 2-ethylbenzimidazole (1r), in which the benzylic C-H bonds of the ethyl substituent is directly adjacent to a coordinating group. Under the standard conditions, the benzylic ketones 2q and 2r were obtained in only 48% and 15% yields, respectively (Scheme 4A). This poor reactivity contrasts the good reactivity observed with analogous doubly benzylic substrates 1b, 1g and 1h in Table 3. We hypothesized that, in these reactions, the product could chelate the cobalt co-catalyst and inhibit further product formation. To test this hypothesis, we investigated the reaction of an effective substrate, 4-ethylpyridine 1e, in the presence and absence of 4-acetylpyridine 2e or 2-acetylpyridine 2q Table 3 Oxygenation of polar (hetero)arenes a a 1 mmol scale, isolated yields.  (Scheme 4B). The results show that 2e has minimal impact on the reaction (Scheme 4B, entries 1-3), whereas the presence of 2q signicantly lowers the yield in the oxygenation of 1e (Scheme 4B, entries 1, 4 and 5). The observations in Scheme 4 prompted us to consider cobalt-free electrochemical aerobic oxygenation reactions, originally reported by Masui and coworkers in the 1980s. 20,21 These methods generate PINO via electrochemical oxidation of NHPI (i.e., in the absence of cobalt ions) and, therefore, should not be susceptible to chelate-inhibition by the product. Preliminary studies validated this hypothesis. Optimization of Masui's reported electrochemical conditions with 1q and 1r enabled formation of the ketone products 2q and 2r in 82% and 70% yields, respectively. These results represent substantial improvements over those obtained with the chemical conditions (Scheme 5). Further studies will be needed to explore the full scope and limitations of the electrochemical method.
Preliminary studies with other substrates (e.g., with 1b and 1g) suggest that the chemical conditions will be superior to the electrochemical conditions in other cases. These observations together with the ease of reaction set up and performance of the Co/NHPI/O 2 oxygenations suggest that the aerobic reactions will be advantageous in most cases. Nonetheless, the results with the oxygenation of 1q and 1r demonstrate that electrochemical NHPI-mediated reactions could be a valuable complement to Co/NHPI reactions in strategic situations.
The standard Co/NHPI/O 2 conditions developed here exhibit a number of features that are appealing from a process chemistry perspective, including a low cobalt catalyst loading and a high reaction concentration, which minimizes solvent volume. The relatively high NHPI loading (20 mol%) is offset by its extraordinarily low cost (<$5 per kg on commercial scale). In an effort to demonstrate the potential utility of this method for larger-scale applications, we targeted a streamlined route to the heterocyclic ketone 2s (Scheme 6A), an intermediate en route to AMG 579. 22 The latter compound is a clinical candidate for the treatment of neurological conditions such as schizophrenia and Huntington's disease. The reported multi-step route to 2s is effective, but it is operationally complex and requires careful control of reaction temperature during the deprotonation and addition (Scheme 6B). 23 We envisioned an alternative, two-step route to 2s, starting from the inexpensive, commercially available precursors o-phenylene diamine and 4-uorophenylacetic acid (Scheme 6C). The Co/NHPI-catalyzed oxygenation of 1s was performed in EtOAc (1 M) with 500 psi of 9% O 2 in N 2 to maintain the O 2 concentration below the limiting oxygen concentration (LOC) of EtOAc. 24 Operation of this reaction on 2 g scale resulted in near quantitative isolated yield of 2r (95%).
This route to 2s incorporates a number established green chemistry principles: 25 (i) waste prevention due to high volumetric efficiency, (ii) atom economy due to use of O 2 as both the terminal oxidant and oxygen atom source, (iii) use of an environmentally benign ester solvent, 26 (iv) use of an earth-abundant metal catalyst, (v) application of practical reaction conditions with respect to temperature and pressure, as well as (vi) application of inherently safe reaction conditions (i.e., below the LOC of EtOAc). Although more thorough analysis would be required to compare the overall process viability of the two routes, the two-step condensation/oxidation sequence in Scheme 6C should have a much smaller environmental footprint, owing to the formation of water as a only stoichiometric by-product in each of the two reactions. 27 Reecting this feature, the route in Scheme 6B has an estimated E-factor of >15, while the two-step condensation/ oxidation sequence can be <5. 28

Conclusions
The results described herein show that Co/NHPI-catalyzed, radical-mediated, benzylic aerobic oxygenation reactions are quite effective with pharmaceutically relevant heterocyclic substrates. The comparatively non-polar nature of the H-atom transfer step mediated by PINO plays an important role in expanding the scope of aerobic benzylic oxygenation to substrates that are ineffective with complementary heterolytic oxygenation methods. 5,6 The chemistry and reaction conditions identied herein are sufficiently practical that these methods could be compelling for largescale application. In addition to the low E-factors associated with these reactions, the homogeneous reaction conditions (i.e., lacking solid reagents or additives) suggest that they are excellent candidates for continuous-ow applications. 29 This opportunity warrants attention in future studies.