compounds ( AMCs ) controlled facile synthesis of acridine and phenanthridine from morita Baylis – Hillman acetate †

We carried out simple and facile syntheses of acridines and phenanthridines from MBH acetates of 2chloro-quinoline-3-carbaldehydes with active methylene compounds (AMCs). Formation of products was found to be dependent on the functional group of the AMC. For example, ethylcyanoacetate and malononitrile favoured the formation of acridines and cyanoacetamide, and ethyl nitroacetate and malonic esters favoured formation of angularly-fused phenanthridines. The reactions leading to the formation of phenanthridines proceeded through single bond rotation of SN20 intermediate which was attributed to electronic/steric repulsion between the functional groups of AMCs and the nitrogen of quinoline.


Introduction
Acridines and phenanthridines constitute an important class of linearly and angularly benzo-fused quinolines. 1 Derivatives of these quinolines have garnered great interest from synthetic chemists due to their signicant biological activities, 2 such as their antitumor, antimalarial, antituberculosis, antibacterial, antiprotozoal, antileukemic, anticancer, and anti-HIV activities, and due to their ability to intercalate between base pairs of double-stranded DNA and hence alter the cellular machinery. 3Some derivatives are used as pigments and dyes in industry 4 and are also used as biological uorescent probes to monitor polymerization processes. 5In addition, conjugated derivatives showing electronic and photophysical properties are used as organic semiconductor materials. 6wing to the great medicinal and industrial importance of acridine derivatives, several methods for synthesizing them have been reported in the past few decades, with these methods including dehydrogenation, 7 metal-catalyzed coupling, 8 C-H functionalization, 9 and inter-10 and intramolecular 11 cyclization.Similarly, radical reactions, 12 metal-catalyzed coupling reactions, 13 cycloaddition reactions 14 and other synthetic methods, 15 mostly involving ortho-functionalized biaryl derivatives as substrates, have been reported for the synthesis of phenanthridine derivatives.However, these reactions constructed the aza ring of the acridine and phenanthridine moieties.Substrates, in particular quinoline derivatives, affording either acridines or phenanthridines via benzannulation have, in contrast, been less explored. 16However, these methods have certain limitations such as requiring a high temperature, a strongly basic or acidic medium, expensive reagents, starting materials that are difficult to obtain, and moderate yields.Therefore, developing simple routes from easily accessible precursors, under relatively mild reaction conditions, is highly desirable for the synthesis of acridines and phenanthridines.
In recent years, Morita Baylis Hillman (MBH) reaction, a three-component, atom-economical, carbon-carbon bondforming reactions of aldehydes, activated alkenes and catalysts led to the formation of MBH adduct which is an attractive precursors for various organic synthetic transformations 17 with various functionalities.
These unusual results have inspired us to systematically investigate using other active methylene compounds (AMCs) such as ethylcyanoacetate, malononitrile, cyanoacetamide, ethylnitroacetate, dimethyl/diethylmalonate.We herein report the reaction of AMCs with MBH acetates of 2-chloro-quinoline-3-carbaldehydes, which provided facile routes to acridines and phenanthridines, respectively.

Results and discussion
Initially we focused our studies on the reaction of the ethylcyanoacetate reagent (1.5 equiv.)with MBH acetate 1a (0.5 mmol) and K 2 CO 3 (1.5 equiv.)under our previously reported conditions 18d in DMF at room temperature.The reaction was completed in 30 min and afforded the single product 2a in 78% yield.The structure of 2a was determined to be 4-cyanoacridine-2-carboxylic acid methyl ester on the basis of its spectral and analytical data.This result suggested the decarboxylation of the ester followed by dehydrogenation to be faster than the elimination of the cyano group and decarboxylation could be attributed due to the formation of carboxylate anion (I) (Scheme 1).
The scope of ethylcyanoacetate was further investigated with other MBH acetates.All reactions proceeded smoothly to afford acridines 2a-l in good to excellent yields.The results are listed in Table 1.Lengthening or branching of ester alkyl in the MBH acetate lowered the yields (2b & 2c).Replacing the ester with a cyano group in the MBH acetate resulted in product 2d, but with a decreased yield of 68%.Similar reactions were further investigated with MBH acetates of substituted quinolines.The results are given in Table 1 (2e-l).MBH acetates with electrondonating groups (EDGs) were more reactive than those with electron-withdrawing groups (EWGs), and hence afforded the product in higher yields (2e-j).
The malononitrile reagent was also examined with 1a under similar conditions and afforded the same product 2a, in 5 min with 92% yield, as described above.Next, we reacted the cyanoacetamide reagent with 1a for the purpose of synthesizing an acridine derivative.When 1a was treated with cyanoacetamide (1.5 equiv.)and K 2 CO 3 (1.5 equiv.)under similar conditions as described above, the reaction took a longer time (2.5 h) to complete, and the isolated product 3a was obtained, instead of acridine 2a, in 62% yield.The structure of 3a was determined to be 6-chloro-10-cyano-phenanthridine-8-carboxylic acid methyl ester from its spectral and analytical data.The formation of 3a suggested that S N 2 0 product (II) underwent rotation about the single bond connecting two sp 2 carbons to form conformation (III) followed by cyclization, deamidation and dehydrogenation to form product 3a (Scheme 2).The loss of the amide group may have been due to isocyanic acid (H-N]C]O) 18d (Scheme 2).
The dependence of the synthesis of planar/angular tricyclic benzo-fused quinolines such as dihydroacridines, acridines and phenanthridines on the functional group of the AMC inspired us to test the reactions of additional AMCs with MBH acetate.We tested the reaction with ethylnitroacetate and found that MBH acetate provided phenanthridine template as did cyanoacetamide.When MBH acetate 1a was treated with ethylnitroacetate (1.5 equiv.)and K 2 CO 3 under reaction conditions similar to those described above, the reaction completed in 5 h and a single product was isolated in 59% yield and characterized as angularly fused phenanthridine derivative 3g.The Scheme 1 Use of ethylcyanoacetate.
Table 1 Substrate scope a a All reactions were performed with 1 (0.5 mmol) by using ethylcyanoacetate (1.5 equiv.)and K 2 CO 3 (1.5 equiv.) in DMF (2 mL).The reaction time and yields of isolated products are given.
Scheme 2 Use of cyanoacetamide.
corresponding linearly fused cyclized acridine was not isolated from the reaction mixture (Scheme 3).However, the aromatization step proceeded via elimination of the nitro group.Rotation about the carbon-carbon single bond of the S N 2 0 product (II) in nitrogen-containing functional groups of AMCs could be presumed to be due to electronic repulsion between the nitrogen functional group and the nitrogen of the quinoline, and to be a source of instability of S N 2 0 product (II).
The scopes of both the cyanoacetamide and ethylnitroacetate reagents were further investigated with other MBH acetates under the optimized conditions.All reactions proceeded and afforded phenanthridine derivatives 3a-f with cyanoacetamide in 54-70% yields and 3g-i with ethylnitroacetate in 59-66% yields.Lengthening and branching of the ester group of MBH acetate gave products 3a-c in nearly the same yields, specically 60-62%.Similarly, MBH acetates bearing EDG were more reactive than those bearing EWG, and hence gave products 3d-e and 3h-i in better yields than 3f.The results are summarized in Table 2.
Next, we explored the reaction of malonic ester reagents with MBH acetate 1a for the purpose of synthesizing either acridines or 1,4-dihydroacridines.For this purpose, MBH acetate 1a was employed with malonic esters under similar reaction conditions.The reactions were completed in 2-3 h and afforded products 4 in 67-74% yields and the products 4 were determined to be 1,4-dihydro-phenanthridines.The reaction mixture was further heated at 70 C for 24 hours for the purpose of effecting a complete aromatization of the product but failed to proceed and the dihydro product was recovered.The reagent applicability was further evaluated with other MBH acetates, and corresponding dihydro products 4a-c were afforded in 67-74% yields (Scheme 4).

Conclusions
In conclusion, we have developed an efficient method for synthesis of acridines and phenanthridines from reactions of MBH acetates of 2-chloro-quinoline-3-carbaldehydes with various AMCs in one pot at room temperature under aerobic conditions.Formation of products was found to be dependent on the functional group of the AMC.Our synthetic route is advantageous with respect to reaction conditions, and the availability of substrates from easily accessible starting materials.
Scheme 3 Use of ethylnitroacetate.
Table 2 Substrate scope a a All reactions were performed with 1 (0.5 mmol) by using cyanoacetamide/nitroethylacetate (1.5 equiv.)and K 2 CO 3 (1.5 equiv.) in DMF (2 mL).The reaction time and yield of isolated product are given.

Fig. 1
Fig. 1 Previous work and present work.