Issue 1, 2016

Low contact resistance in solid electrolyte-gated ZnO field-effect transistors with ferromagnetic contacts

Abstract

Understanding the role of contacts and interfaces between ferromagnetic metals and semiconductors is a critical step for spin injection and transport. Here, high performance solid electrolyte gated ZnO field-effect-transistors (FETs) with ferromagnetic Co contacts as the source and drain electrodes were demonstrated. Solid electrolyte gating provides a large electric field in the FETs that leads to an ohmic contact between the Co electrode and the ZnO film. The contact resistance can be tuned by the gate voltage and reduced to 66 Ω cm. Compared with FETs using a traditional SiO2 dielectric, an improved transistor performance is achieved with a current on/off ratio of 106 and a field-effect mobility of 5.24 cm2 V−1 s−1. The magnetoresistance calculation based on a spin diffusion model indicates that the on-state contact resistance of the solid electrolyte gated FETs falls in the optimal range for the injection and detection of spin-polarized charge carriers. These results reveal that the electrolyte gating allows for engineering the contacts for nanoelectronic and spintronic devices.

Graphical abstract: Low contact resistance in solid electrolyte-gated ZnO field-effect transistors with ferromagnetic contacts

Article information

Article type
Paper
Submitted
12 Sep 2015
Accepted
23 Nov 2015
First published
24 Nov 2015

J. Mater. Chem. C, 2016,4, 150-156

Low contact resistance in solid electrolyte-gated ZnO field-effect transistors with ferromagnetic contacts

X. Hu, J. Sun, C. Qian, F. Liu, J. Yang, G. Guo and Y. Gao, J. Mater. Chem. C, 2016, 4, 150 DOI: 10.1039/C5TC02873F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements