The total synthesis of K-252c (staurosporinone) via a sequential C–H functionalisation strategy

A synthesis of the bioactive indolocarbazole alkaloid K-252c (staurosporinone) via a sequential C–H functionalisation strategy is reported.

The indolocarbazole alkaloids K-252a-d (1-4) are microbial metabolites rst isolated in 1986 from culture broths of Nocardiopsis sp. K-252 and Nocardiopsis sp. K-290 (Fig. 1a). 1 The compounds were found to be potent inhibitors of protein kinase C, an enzyme family known to play a critical role in a myriad of signal transduction pathways associated with metabolism, gene expression, membrane transport and cell proliferation. 2 Consequently, the protein kinase C family of proteins has become an important therapeutic target for several disease classes, particularly in oncology, resulting in sustained interest in the design and development of inhibitors as potential pharmaceutical agents. 3 In light of their intriguing biological properties and potential as pharmaceutical agents, the indolocarbazole alkaloids have attracted considerable interest from the synthetic community. In particular K-252c, (3, staurosporinone), 4 the potential biosynthetic precursor and aglycone of staurosporine 5, 5 has attracted a number of elegant syntheses. We were attracted to these natural products because of their interesting biological activity and the unusual functional pattern of the hexasubstituted arene framework. Our group has a long standing interest in the synthesis of natural products that rely on strategies based on the sequential functionalisation of the C-H bonds in simple aromatic building blocks (Fig. 1b). 6-8 We envisaged that K-252c, 3, could provide a platform to further extend this total synthesis strategy by orchestrating a series of direct functionalisations on a readily available aniline to form the fully substituted benzene core of the target molecule. Furthermore, such a modular strategy would be amenable to the preparation of analogues of this important scaffold. Herein we report a concise synthesis of the indolocarbazole alkaloid K-252c starting from a commercial toluidine starting material. Seven direct functionalisations are used to transform C-H bonds of the aniline into the substituents required for the hexasubstituted arene core of the natural product architecture. Despite the increasingly complex architecture that results from each step, a notable feature of this synthesis is the exquisite selectivity of each C-H transformation, thereby highlighting the efficacy of sequential C-H functionalisation strategies. 9 At the outset of our design stage, we questioned whether ptoluidine, a simple commercial aniline, could be used to launch a sequential C-H functionalisation strategy for the synthesis of K-252c, 3, (Scheme 1). Many of the previous syntheses use a common strategy to assemble the indolocarbazole framework that is based on the union of two indole molecules with a synthetic precursor to the lactam ring system, followed by an oxidative electrocyclisation to form the poly(hetero)aromatic framework. 4,5 Most elegant among these syntheses is the work of Wood and co workers who developed a concise approach to this class of natural products. 5c Despite the simplicity of this type of strategic disconnection, it remains difficult to engineer an unsymmetrical indolocarbazole framework from such a convergent route. As part of our synthetic strategy towards staurosporinone, we envisaged that a sequential C-H functionalisation approach might benet from late-stage carbazole formations in order to modulate the electron density of the central arene core (Fig. 2). The lactam would originate from a C-H carbonylation directed by the benzylamine motif, which itself could be introduced through a radical-mediated benzylic oxidation. These disconnections would reveal a teraryl framework 6, displaying an amine motif that would control the selective installation of the adjacent nitro group and a series of ortho-and meta-C-H arylations, leading back to p-toluidine. Taken together, the amine motif of the aniline directly controls four out of seven direct functionalisations on the aromatic framework of this complex molecule.
The total synthesis of K-252c commenced from the readily available dibenzyl p-toluidine 7, available in multigram quantities (Scheme 1). The rst C-H functionalisation of the arene core involved the union of the commercial diphenyliodium triate with 7 through the action of a simple copper(II) catalyst, a biaryl coupling strategy recently developed by our group. 10 The ortho-selective arylation proceeded in good yield and on a multigram scale to form 8; we did not detect any of the corresponding di-ortho-phenylation product, which is oen a problem with comparative metal-catalysed arylations. We believe that the selectivity of this process is due to the low reactivity of the product to subsequent arylations. A clash between the ortho-phenyl substituent and the N,N-dibenzyl group forces the amino group to rotate to alleviate the steric interaction; the lone pair on the nitrogen rotates out of conjugation with the arene, reducing the arene nucleophilicity and making it less reactive towards a second arylation.
To install the second aryl group, we envisaged the use of a copper-catalysed meta-arylation that has also been recently developed in our laboratory. To achieve this, however, the Nbenzyl substituents needed to be switched to a carbonyl-containing group, which is important to impart the desired metaselective arylation. 11 The nature of the carbonyl group needed to carefully considered with respect to both the effectiveness in the  meta-arylation, its stability to subsequent reaction conditions and its compatibility with the oxidative C-H amination that would be required to form the carbazole at a later point in the synthesis. We had previously shown that meta-arylation was best effected by a pivalamide group, but there are no examples of C-H aminations using amines derived with this bulky group. In contrast, meta-arylation directed by simple acetamides was oen low yielding due to competitive amide cleavage, although there are a number of C-H aminations that can be initiated by this simple amide motif. In balancing these factors we elected to investigate the propionyl group in the hope that the extra size of the ethyl substituent would render the amide less liable to cleavage, but would still prove effective in the carbazole formation step. Therefore, a one-pot hydrogenolysis and subsequent carbamoylation with propionyl chloride enabled the formation of anilide 9 in excellent 96% yield on a multigram scale. Pleasingly, a slight modication to our copper-catalysed meta-arylation worked well and treatment of anilide 9 with diphenyliodonium triate in the presence of copper(I) iodide, silver(I) triate (providing an in situ source of copper(I) triate) and solid sodium hydrogen carbonate (to buffer the reaction in light of the formation of triic acid as a by-product) produced the teraryl intermediate 10 in 71% yield on a 4 g scale (the mass balance was unreacted starting material).
With teraryl 10 in hand, efforts next focused on the addition of the second nitrogen substituent. It was envisaged that installation of a nitro group, which could be subsequently employed in a late-stage reductive cyclisation to a carbazole, would be the optimal strategy. Treatment of 10 with concentrated nitric acid in a cooled solution of triuoroacetic anhydride and triuoroacetic acid yielded the desired product in 60% yield, although attempts to scale-up the reaction were unsuccessful, resulting in lower yields. Interestingly, we found that replacing the triuoroacetic anhydride with tri-uoromethanesulfonic anhydride, a modication of an underutilised aromatic nitration protocol developed by Hill and co-workers, 12 led to signicant improvements in both the yield and selectivity. Furthermore, the modied conditions were scalable, enabling an exquisitely selective and gram scale reaction to produce the nitro-arene 11 in 92% yield.
With both nitrogenous groups installed on the central arene framework, attention was turned to the C-H amination to form one of the two-carbazole units. Several metal catalysed C-H aminations to carbazoles have been developed in recent years, 13 but unfortunately, we found that palladium-catalysed methods for carbazole formation were either capricious or resulted in none of the desired product when applied to our system. 14 Pleasingly, the copper-catalysed oxidative C-H amination protocol developed by Chang and co-workers employing phenyliodide bis-triuoroacetate and copper(II) triate effected the carbazole formation (to 12) in good yield (70% on 3.58 g scale, 88% on 100 mg scale). 15 We next turned to the installation of the g-lactam motif that we speculated could arise from an advanced benzaldehyde. Despite the availability of a number of methods to affect to the oxidation of the benzylic methyl group to a benzaldehyde, all attempts to directly access 13 proved unsuccessful. This is possibly due to the deactivating effect of the resident nitro group. To overcome these difficulties, a selective radical bisbromination of the benzylic position (to 12a, Scheme 2), 16a followed by treatment with DMF and K 2 CO 3 afforded the desired aldehyde functionality with concomitant cleavage of the carbazole N-protecting group. 16b This sequence could be combined into a one-pot procedure to supply the desired aldehyde in 54% yield on a gram scale.
While we reasoned that reductive amination of aldehyde 13 with a suitable amine would lead to a precursor for the proposed C-H carbonylation to form the g-lactam, we were conscious that primary amines coordinate strongly to metals such as palladium and oen inhibit catalytic activity. Therefore, we elected to carry out the reductive amination with a benzylic amine with the intention of adopting Orito's C-H carbonylation to the desired protected g-lactam. 17 However, the choice of amine required further consideration as the use of benzyl amine would lead to selectivity problems in the carbopalladation step of the C-H carbonylation (selectivity between I and II, Scheme 2 Telescoped synthesis of aldehyde 13. Scheme 3 Optimisation of protecting group for C-H carbonylation. Scheme 3a). Mindful of this, we prepared a number of benzylamine variants displaying ortho-substituents to block the competitive C-H activation (Scheme 3b). We were pleased to nd that 2,6-dimethylbenzylamine performed well in both the reductive amination and the palladium-catalysed C-H carbonylation to form g-lactam 15a.
With all but one ring now installed to the aromatic framework of staurosporinone, we turned our attention to the nal C-H amination. Aer extensive experimentation we found that ring closure based on reductive metal-catalysed C-H aminations from the nitro group or oxidative C-H aminations from amine derivatives failed to produce any of the desired carbazole. [13][14][15] However, we were delighted to nd that a classical reductive Cadogan cyclisation from 15a, 18 utilised by Raphael et al. in their pioneering work on staurospoinone, 4c produced the target carbazole 16 in modest yield. While these initial reactions, using P(OEt) 3 to generate the requisite nitrene species, were low yielding (36% yield), we found that through careful monitoring of the reaction time and temperature (20 min at 210 C), 16 could be isolated in 85% yield without the need for column chromatography. The nal deprotection to afford K-252c 3 proved to be challenging, but aer a survey of a range of standard N-debenzylation techniques we found that treatment of lactam 16 with TBAI and BCl 3 , conditions developed by Coe and co-workers for the deprotection of primary alkyl aryl ethers, 19 afforded K-252c 3 in 78% yield, the spectral data for which were consistent with those reported in the literature.

Conclusions
In summary, we have successfully applied a sequential C-H bond functionalisation strategy to the synthesis of K-252c. The overall yield if the synthesis from a readily available aniline (7) is 12.7%. The sequence of direct functionalisations follows a logical order of reactivity that sees the amine group of the starting toluidine control four of the C-H functionalisations. The synthesis showcases transformations comprising of two selective copper-catalysed C-H arylations, a highly selective electrophilic nitration, two C-H amination protocols to form carbazoles, a benzylic methyl oxidation and a palladium-catalysed C-H carbonylation. The synthesis is amenable to scale-up, providing access to intermediates on gram or multi-gram scale. Furthermore, it is envisaged that this modular approach could be used to provide rapid access to analogues of this biological important class of molecule, as well as complex hexasubstituted benzenes. 20 Current research in our laboratory is focused on applying this sequential C-H functionalisation strategy to the synthesis of staurosporinone analogues and other complex natural products that could benet from such a strategy.