Modular synthesis of dihydro-isoquinolines: palladium-catalyzed sequential C(sp2)–H and C(sp3)–H bond activation

An efficient synthesis of dihydro-isoquinolines via a Pd–catalyzed double C–H bond activation/annulation featuring a short reaction time, high atom economy and the formation of a sterically less favoured tertiary C–N bond.

Transition metal catalyzed C-H bond activation has become one of the most studied research areas in the last 15 years. 1 The activation of C(sp 2 )-H bonds for the syntheses of functionalized arenes and alkenes has been further applied in material science and pharmaceutical sciences. 2 However, the reactions on the less reactive C(sp 3 )-H bond are still a challenge for synthetic organic chemists. Pioneers like Yu, Gaunt, Kündig, Baudoin, Shi and Rao et al. in this area have mainly focused on two typical strategies: (1) Pd-induced oxidative addition onto an aryl halide followed by intramolecular C(sp 3 )-H bond activation to give cyclized product 2, see Scheme 1-eqn (1); 3 (2) directed C(sp 3 )-H bond activation of alkane 3 followed by the oxidative addition of an aryl or alkyl halide and reductive elimination for the introduction of alkyl or aryl substituents into the system (Scheme 1-eqn (2)). 4 However, in both of the strategies (Scheme 1, eqn (1) and eqn (2)), aryl halides or alkyl halides have to be utilized for the direct functionalization of the C(sp 3 )-H bond. Herein, we report our latest discovery of the rst direct double activation of C(sp 2 )-H and C(sp 3 )-H bonds for the synthesis of dihydro-isoquinolines under radical processes (Scheme 1-eqn (3)).
Previously, we have demonstrated a type of C-H activation/ annulation reaction for the synthesis of hydroxyl isoindolones via Pd(III) or Pd(IV)-catalyzed radical processes. 5 The possible Pd(III) intermediate 9 and Pd(IV) species 10 may be formed during the processes (Fig. 1).
Inspired by the proposed reactive intermediates, we envisaged a new pathway for the direct C(sp 2 )-C(sp 3 ) bond construction via a sequential C(sp 2 )-H and C(sp 3 )-H bond activation. As described in Scheme 2, an arene bearing a directing group undergoes a directed C(sp 2 )-H activation to give a Pd(II) intermediate 12, upon the radical addition, one or two aliphatic chain(s) (depends on the oxidation state of the Pd centre) could be introduced for the further C(sp 3 )-H bond activation, analogous to the initial step under CMD processes. Aer the formation of the bicyclic system the highly reactive Pd(III/IV) species undergoes a reductive elimination to give an intermediate Pd ring followed by further reductive elimination or work up to give the nal product 16.
With regard to the proof of concept, N-substituted benzamides, acetanilides as well as 2-phenyl pyridines were examined with a variety of radical synthons (possibly formed amide, aldehyde or alcohol radicals) in a combination of radical initiators (AIBN, TBHP et al.), in all cases, either unreacted starting material was recovered or hydrolysis was observed for the reactions with benzamides. Even under the reaction conditions we have previously reported for the synthesis of hydroxyisoindolones, we did not observe any of the proposed products (either the directly coupled product or the CHAA product). Interestingly, however, when N-methoxyl benzamide 17a 6 was treated with 5.0 equivalents of tertiary butyl hydrogen peroxide (TBHP) in the presence of Pd(OAc) 2 (10 mol%) and 10.0 equivalents of TFA in DCE at 100 C, our proposed product 18a was isolated in 5% yield (Scheme 3). The product structure was unambiguously conrmed using X-ray crystallography. With the proof of concept, we carried out our preliminary studies using non-substituted benzamide 17b as the model for the reaction condition evaluations.
Based on the preliminary studies, we found that di-tert-butyl peroxide (DTBP) was an excellent source for the C-H activations. TFA seemed to be crucial for this type of transformation in order to make the C(sp 3 )-H activation proceed while other acid or base additives did not provide any of our desired product 18b during our studies. The reaction condition screening focused on the stoichiometry of the acid as well as the screening of the solvents. We found that the acid additive is crucial for this transformation, as demonstrated in ESI Table S1. † In the presence of 20.0 equivalents of TFA, reactions using AcOH and cyclohexane as the solvents gave the corresponding dihydro-isoquinoline 18b in 69% and 75%, respectively (see ESI, Table S1, † entries 3 and 4), prior to DCE which gave a rather disappointingly low yield. When THF was chosen as the solvent, no product was isolated. Further increasing the amount of TFA used gave rise to a much higher yield and the product was then isolated in 89% yield. The stoichiometry of TFA as the additive was also evaluated and 25 equivalents seemed to be an optimal condition for this transformation (ESI, Table S1, entry 6 †). In addition, hexauorobutyric acid (HFBA) has also shown a good reactivity for the reaction and the desired dihydro-isoquinoline was synthesised in 85% yield (ESI, Table S1, entry 7 †).
With the optimal conditions in hand, we have started to evaluate the scope and limitations of this methodology. Neither the electronic nor the steric effects of the substituents on the aromatic ring affected the reactivity. The corresponding dihydro-isoquinolines were successfully prepared. For the synthesis of dihydro-isoquinoline 18b, we were pleased to nd that even under our optimal conditions, the introduction of 3.0 equivalents of benzaldehyde (similar conditions which had been reported previously for the synthesis of hydroxyl isoindolones), our desired product 18b was isolated in 55% yield together with benzoic acid (27%) and methyl benzoate (18%). Surprisingly, no hydroxyl isodolone was detected from the 1 H NMR of the crude reaction mixture which indicates that our desired reaction is more favored than the hydroxyl isoindolone formation processes. Benzamides bearing electron decient substituents at the para-position are good substrates and the corresponding dihydro-isoquinolines 18c-18f were synthesized in good yields. Electron rich benzamides are also tolerated; the products 18g and 18a were also facilitated in good yields. Either electron rich or electron decient substituents at the ortho-position would provide dihydro-isoquinolines, such as 18h-18j, synthesised in 54-94% yields. Reaction of a meta-substituted benzamide gave rise to the corresponding product 18k exclusively in 43% yield which consistently agreed with the selectivity that we have reported previously. 7 In addition, the reaction with N-isopropoxy benzamide was also examined and isoquinoline 18l was obtained in 75% yield. The reaction of N-methyl benzamide also works and the corresponding product 18m was successfully synthesized, albeit with a low yield (10%). The low yielding reaction is due to the low reaction conversion as most of the starting material was le without having been converted into the dihydro-isoquinoline. Unfortunately, the attempts of the synthesis of N-phenyl dihydro-isoquinoline 18n failed to provide the desired product (Table 1).
Peroxides are not the only efficient coupling partners; we were pleased to nd that when the inorganic salt K 2 S 2 O 8 was employed as the oxidant for the reaction, product 18b could be synthesised in a similarly good yield (84%), compared to the corresponding reaction with DTBP. The reaction with N-methyl benzamide also worked as the desired N-methyl dihydro-isoquinoline 18m was isolated in 10% yield, together with 88% unreacted starting material. Unsymmetrical tertiary alcohols are also tolerated in the reaction, while the reaction of 1,1dimethyl propanol with benzamide 17b gave the two regioisomers 18o and 18o 0 in 63% and 8%, respectively (Table 2). However, the regioselectivity for the syntheses of 18p and 18q

Scheme 2 Proposed sequence for the C(sp 2 )-H and C(sp 3 )-H bond activation.
Scheme 3 The synthesis of dihydro-isoquinoline 18a and its X-ray structure.
seemed very low and the isomers 18p and 18p 0 were isolated in 29% and 33%, respectively. Similarly, dihydro-isoquinolines 18o and 18o 0 were formed in a nearly 1 : 1 ratio. The low regioselectivity in 18p and 18q may due to steric hindrance balanced with electronic effects, which had predominantly played crucial roles in the good selectivity for the preparation of 18o and 18o 0 . A similar trend was observed when a more hindered alcohol was utilized and the corresponding dihydro-isoquinolines 18r and 18r 0 were isolated in 32% and 31% yields. Interestingly, when 3methylpentan-3-ol was employed, only a single regioisomer 18s was isolated as a 3 : 2 mixture of 2 diastereoisomers (the relative stereochemistry was not determined). These results may indicate that the later C-H activation of an alcohol is more likely to proceed at the more substituted carbon centre. Unfortunately, alcohols 6a-6c failed to give the corresponding dihydro-isoquinolines, only the background radical hydrolysis products benzoic acid and/or methyl benzoate were formed.
Early this year, Yang has reported the Pd-catalyzed intramolecular tandem aminoalkylation for the activation of C(sp 3 )-H bonds. An intramolecular cyclization reaction of alkenes for the formation of ve membered-lactams has been described. 8 A concern for the product formation could be the simple elimination of a tertiary alcohol for the generation of an alkene, which would be further reacted with benzamide in the presence of the Pd catalyst. However, under our standard conditions, when an alkene was subjected to the reaction, no desired product 18p was observed, instead only unreacted starting material was recovered in 94% yield aer column chromatography (Scheme 4).
The use of a radical scavenger for the reaction was tested; we found that the introduction of 8.0 equivalents of butylated hydroxytoluene (BHT) totally shut down the reactivity. Aer heating the reaction mixture under standard conditions for one hour, no desired product was observed and only 95% of the unreacted starting material was recovered. Unfortunately, the    trapping reaction using TEMPO gave us a complicated reaction mixture with 92% of the starting material recovered (Scheme 5).
The reaction using the pre-C-H activated palladacycle 19 was also successful, which may indicate that this reaction may undergo C-H activation of the directed arene rst followed by a second C-H activation of the alkyl group aer the addition of the radical to the Pd centre (Scheme 6).
To have a better understanding of the reaction mechanism, we set up competitive KIE studies. A 1 : 1 mixture of benzamide 17b with 17b-5D under our standard conditions gave a 1.9 : 1 mixture of 18b and 18b-D5 which showed a primary isotope effect which indicates that the C(sp 2 )-H activation processes may be involved in the selectivity determining step.
Similarly, intramolecular KIE studies using tert-butanol-D6 were also carried out. A much higher KIE value of 4.7 : 1 compared to the KIE value 1.9 : 1 for ortho-C(sp 2 )-H activation (Scheme 7) was observed which may imply that the C(sp 3 )-H activation processes may be involved in the rate determining step. 9 Our KIE value for the C(sp 3 )-H activation is comparable with the KIE value of 5. , unlike in Rh-and Ru-catalyzed C-H activation processes which are similar to the discoveries that have been discussed previously in our isoquinolone syntheses. 11 The large KIE value has also proven that the activation of tert-butanol is likely to be involved in the reaction pathway instead of the reaction with the possible formed alkene during the reaction which is shown in Scheme 4.
According to our initial proposal, as well as the evidences we have collected during the mechanistic studies, we have proposed a plausible reaction mechanism based on the Pd(II)-Pd(IV) cycle for the reaction pathway. The reaction of palladacycle 19 with 1.0 equivalent of tertiary butoxide radical (0.5 equiv. of DTBP) did not provide our desired product in greater than 50% yield (Scheme 9), which may indicate that the reaction needs more radicals for the oxidation of the Pd(II) species ultimately into Pd(IV), which may be involved in the key reaction mechanism instead of Pd(III) intermediate.
As we have shown in Fig. 2, starting from benzamide 17b for instance, the C(sp 2 )-H activation occurred rst under acidic conditions to give a palladacycle A, (Fig. 2). Under radical conditions, the Pd(IV) species B may form, which would give the active precursor C aer ligand exchange of the tert-butanol with triuoroacetate. The further reaction is involved in a CMD process for the activation of a C(sp 3 )-H bond to form a bicyclic intermediate, D. The nal product was then formed aer a reductive elimination as well as a further elimination of PdO,   which had also been proposed by Daves during their studies of syn-elimination of PdO. 12 The ligand exchange would be bene-cial for the regeneration of the active Pd(II) species for the next catalytic cycle.
In conclusion, we have reported a novel approach for the synthesis of a series of useful dihydro-isoquinolines via sequential C(sp 2 )-H and C(sp 3 )-H bond activation of benzamides reacting with tertiary alcohols. These novel radical processes featured (1) high reactivitytwo intermolecular unactivated C-H bonds were directly functionalized, together with a challengeable tertiary amide bond formation; (2) high efficiencyreactions were generally fast, in most of the cases reactions were completed within 30 minutes; (3) modular synthesisthe heterocyclic ring systems were constructed in a clickable fashion. Detailed mechanistic studies are still in progress.