Biphen[n]arenes

We describe the one-pot synthesis, unique geometries and intriguing host–guest properties of a new class of supramolecular macrocycles – biphen[n]arenes (n = 3, 4).


Introduction
Macrocyclic synthetic receptors bearing preorganized cavities and multivalent binding sites have played a vital role in the birth of modern supramolecular chemistry and its rapid development. 1,2 To design and exploit novel macrocyclic hosts with unique structures and good host-guest properties is a permanent and challenging topic in this area. Some new molecular containers recently reported include Sessler's "Texassized" box, 3 Chun and Singh's calix [4]imidazolium, 4 Ogoshi's pillar [5]arene, 5 Stoddart's Ex-box, 6 Sindelar's bambus [6]uril, 7 Flood's cyanostar, 8 and others. 9,10 Among the supramolecular hosts, macrocyclic arenes based on methylene linked aromatic rings have been the focus of considerable recent research. Starting from calixarenes, the third generation of supramolecular hosts, a series of their structurally similar scaffolds have also been developed, displaying different geometries and molecular recognition/self-assembly behaviors (Scheme 1). 4,5,[11][12][13] For example, calixpyrroles, calixpyridines and the recently reported caliximidazoliums show considerable promise in the area of anion complexation and sensing. 4,11 Cyclotriveratrylenes have been utilized for the complexation and separation of fullerenes. 12, 14 Pillararenes with symmetrical pillar architectures have exhibited novel binding abilities towards neutral guests. 15 Furthermore, these macrocycles have also seeded many potential applications in biology, and materials and environmental science such as drug delivery, 16 extraction and separation, 14,17 stimuli responsive materials, 18 and articial transmembrane channels. 19 Hitherto, most of the macrocyclic arenes have been based on mono-benzene and mono-heterocycle units (Scheme 1). Typical Scheme 1 Structures of some typical macrocyclic arenes. supramolecular macrocycles consisting of substituted benzene monomers include calixarene from phenol, resorcinarene from resorcinol, cyclotriveratrylene from veratrole, and pillararene from hydroquinone. Additionally, calixnaphthalenes 20 have also been demonstrated, but they have not gained as much attention because (i) they do not show good cavity host-guest properties; (ii) their structures are not novel and are similar to calixarenes; and (iii) their synthesis is not easy and usually needs multi-step reactions.
Herein, we report the synthesis, structures, and molecular binding behavior of a new family of macrocyclic arenes, which are made up of 4,4 0 -biphenol or 4,4 0 -biphenol ether units linked by methylene bridges at the 3-and 3 0 -positions (Scheme 1). According to the naming convention of resorcin [4]arenes (based on resorcinol monomers), this new family of supramolecular macrocycles is named as biphen[n]arenes. The biphenarene hosts designed here could be conveniently achieved by a onepot Lewis acid-catalyzed condensation from commercial reagents, and they are expected, and have been found, to have extraordinary architectures and intriguing binding properties.

Results and discussion
For the purpose of easy preparation, a direct cyclization strategy but not a fragment coupling approach was preferentially adopted in the present studies. It was found that the reactions of 4,4 0 -biphenol diethyl ether and paraformaldehyde (or formaldehyde aqueous solution) in the presence of a strong base (e.g. NaOH and KOH) or strong acid (e.g. HCl, H 2 SO 4 and CF 3 COOH) could not give any cyclic oligomers. Nevertheless, when using a Lewis acid, such as FeCl 3 , BF 3 $O(Et) 2 , and tri-uoromethanesulfonic acid (TfOH), as the catalyst, the reactions proceeded smoothly, and one acyclic dimer and two cyclic oligomers containing 3 and 4 biphenol diethyl ether units were successfully obtained (Scheme 2). Aer several attempts, BF 3 $O(Et) 2 proved to be a little more efficient than FeCl 3 and TfOH. Aer optimisation of the reaction conditions in the presence of BF 3 $O(Et) 2 with respect to reaction solvent, temperature, and catalyst amount, the acyclic dimer (BPD), perethylated biphen[3]arene (EtBP3) and biphen [4]arene (EtBP4) were prepared in 9%, 22% and 8% yields, respectively. Furthermore, another larger macrocycle with a m/z value corresponding to the cyclic pentamer was also detected in the highresolution mass spectrometry (HRMS) experiments of the reaction mixture. However, its yield was so poor that it was not successfully isolated for further characterization. The reaction time signicantly affects the product yields. It was found that the best reaction time was 1.5-2 hours; further extending the time decreased the yields of both EtBP3 and EtBP4 and increased the yield of the polymeric product. For example, aer 24 hours, the yields of EtBP3 and EtBP4 were only 5% and 1%. Furthermore, the condensation of 4,4 0 -biphenol dimethyl ether was also examined. Similarly, the acyclic dimer (yield: 12%), cyclic trimer (per-methylated biphen[3]arene, MeBP3, yield: 24%) and cyclic tetramer (per-methylated biphen [4]arene, MeBP4, yield: 5%) were successfully prepared. It should be pointed out that the distributions of the cyclic trimer and the tetramer were totally different in the syntheses of the ethylated and methylated biphenarenes, with yield ratios for trimer : tetramer of 2.8 : 1 and 4.8 : 1 respectively. EtBP3 and EtBP4 were characterized by 1 H NMR, 13 C NMR, and HRMS, as well as by their melting points. They exhibit similar 1 H NMR and 13 C NMR spectra, as shown in Fig. 1 and S1-S4. † Although the cyclotrimer and cyclotetramer were formed in only moderate yields (30% overall yield), the biphenarene hosts are intrinsically easy to prepare since they can be obtained by a one-step condensation reaction using commercial reagents. It is well documented that the modication of supramolecular hosts by attaching various peripheral functional groups can provide further interesting properties and functionalities. As depicted in Scheme 3, the cleavage of the ether groups in EtBP3 and EtBP4 by reaction with excess BBr 3 in CH 2 Cl 2 could quantitatively produce per-hydroxylated biphen [3,4]arenes (OHBP3 and OHBP4). Therefore, it will be straightforward to prepare functionalized biphenarene derivatives through nucleophilic substitution reactions between OHBP3/OHBP4 with alkylating agents in the presence of a suitable base. Besides the hydroxyl groups, the benzene rings of biphenarenes should also be Scheme 2 Synthesis of per-ethylated biphen[3,4]arenes. reactive sites. That is to say, biphenarene hosts can be not only easy to prepare, but also facilely chemically modied. This is certainly signicant for the further construction of efficient recognition/assembly systems and extending the applications of this new family of macrocycles.
Single crystals of EtBP3 and EtBP4 suitable for X-ray analysis were grown by slow evaporation of their CH 2 Cl 2 -n-hexane solutions at room temperature. As can be seen from Fig. 2, their structures are completely different. EtBP3 exhibits a distorted triangular-prism structure and does not have an effective cavity in the solid state ( Fig. 2B and C). EtBP4 has a cuboid-like structure and exists in the form of a 'partial chair' topology, which is similar to that of the "Texas-sized" box. 3 The biphen [4]arene molecular container can be regarded as a new type of neutral molecular box with p-electron rich cavities, which could complement electron-decient tetracationic boxes such as Stoddart's "blue box" 21 and Sessler's "Texas-sized" box. 3 It is also interesting to note that the biphenyl units in biphenarenes could exist in two conformations, i.e., a cis-and trans-conformation according to the relative position of the two methylene linkers ( Fig. 2A). While all of the three biphenyl units in EtBP3 are in the cis-conformation ( Fig. 2B and C), in EtBP4 two of the biphenyl units are in the cis-conformation and two are in the trans-conformation which are positioned in an alternating manner ( Fig. 2D and E).
The host-guest chemistry of EtBP3 and EtBP4 was then investigated. Due to their p-electron rich characteristics, a series of organic cationic molecules (1 + -10 2+ ) and neutral pelectron decient molecules (11-18) were chosen as guests (Scheme 4). Fig. 3 shows the 1 H NMR spectra of n-octyltrimethyl ammonium tetrakis[3,5-bis(triuoromethyl)phenyl] borate (1$BArF) in CDCl 3 recorded in the absence and in the presence of approximately 1.0 equiv. of the EtBP3/EtBP4 hosts. It is found that in the presence of EtBP4, the proton signals of 1 + derived from the methyl H a and methylenes exhibit very pronounced upeld displacements (for example, Dd ¼ À0.99 and À1.11 ppm for H a and H b ) and broadening as a consequence of inclusioninduced shielding effects (Fig. 3D). Meanwhile, the signal corresponding to the tail methyl (H i ) shis slightly downeld (Dd ¼ 0.02 ppm), which is characteristic of the protons being located just outside the host's cavity portal. 22 On the other hand, the host is deshielded by the presence of the guest, since the proton signals of EtBP4 display downeld displacement (Dd ¼ 0.01-0.04 ppm). The binding induced NMR changes are consistent with the formation of an interpenetrated complex. In contrast, upon the addition of EtBP3, no obvious signal changes can be Scheme 3 Synthesis of per-hydroxylated biphen [3,4]arenes. observed for H cÀi of 1$BArF, and the head H a and H b show relatively small upeld shis (À0.05 ppm). These results indicate the formation of a shallow inclusion complex with the guest's " + NMe 3 " site. This is reasonable since EtBP3 does not possess an effective cavity ( Fig. 2B and C). The formation of 1 : 1 1$BArF3EtBP3/EtBP4 complexes was further conrmed by electrospray ionization (ESI) mass spectroscopy experiments (Fig. S38 †) and Job plots (Fig. S39 †). In the ESI mass spectrum of an equimolar mixture of 1$BArF and EtBP3 (or EtBP4), only one intense peak for the 1 : 1 complex [13EtBP3] + with m/z 934.6 (or [13EtBP4] + with m/z 1188.7) was observed. By employing 1 H NMR titration experiments, the association constants (K a ) for these two complexes were determined. As expected, the K a value of 1$BArF3EtBP4 ((1.3 AE 0.1) Â 10 3 M À1 ) is much larger than that for EtBP3 (28 AE 2 M À1 ) due to their completely different binding characteristics. For another three quaternary ammonium salts 2$BArF-4$BArF, similar complexation modes were found, i.e., they formed interpenetrated [2]pseudorotaxane-type complexes with EtBP4, but shallow inclusion complexes with EtBP3. All four quaternary ammoniums give similar K a values upon complexation with EtBP3 because their binding sites are " + NMe 3 " moieties and the substituents do not affect the host-guest affinities. However, for EtBP4, the binding abilities are closely related to the substituted groups since they are engulfed by the host. The K a values of EtBP4 with 3$BArF and 4$BArF with larger naphthyl and pyrenyl moieties are 3.9 and 3.7 times larger than that for 2$BArF with a phenyl group. This may be attributed to the size-t effects between the guests and EtBP4; larger naphthyl and pyrenyl groups are relatively suitable for the EtBP4 cavity, leading to large association constants. Meanwhile, 1 + with an n-octyl group exhibits a stronger affinity than 2 + , possibly because the exible octyl group could twist to t the host cavity.

Conclusions
In summary, we have presented a new family of macrocyclic receptors, biphen[n]arenes (n ¼ 3,4). They are made up of 4,4 0biphenol or 4,4 0 -biphenol ether units linked by methylene bridges at the 3-and 3 0 -positions. The biphenarene hosts reported here have the following intrinsic characteristics and properties: (i) easy accessibility: per-ethylated biphen [3,4]arenes were prepared through a one-step condensation using commercial reagents; the deprotection of the ethoxy moieties in per-ethylated biphen [3,4]arenes quantitatively produced per-hydroxylated biphen [3,4]arenes; (ii) convenient modication: it should be possible to conveniently chemically modify them due to their reactive hydroxyl groups and benzene rings; (iii) unique geometries: their topologic structures are completely different to macrocyclic arenes based on monobenzene units such as calixarenes, resorcinarenes, cyclotriveratrylenes and pillararenes; (iv) excellent cavity host-guest properties: biphen [4]arene is extremely guest-friendly, and is capable of binding both cationic guests and neutral molecules to form inclusion complexes.
Considering the above aspects, this new family of hosts is expected to be applicable in a variety of supramolecular systems such as rotaxanes, catenanes and polymeric aggregates. Furthermore, it is easy to afford their functionalized derivatives, making them promising candidates for applications in chemosensors, nanomaterials, ion and molecule transport, supramolecular amphiphiles, and etc. We believe that biphenarene chemistry will be quite prosperous in the near future.