Issue 3, 2015

Selective adsorption of oil–water mixtures using polydimethylsiloxane (PDMS)–graphene sponges

Abstract

We report a porous and green three dimensional (3-D) polydimethylsiloxane (PDMS)–graphene sponge with hydrophobic and oleophilic properties using the sugar templating method. The prepared sponge exhibited high adsorption performance for the removal of petroleum products, organic solvents and emulsified oil–water mixtures, especially under a continuous vacuum regime achieving an adsorption capacity of 4.5 L of hexane in 30 min. The proposed synthetic method is simple and economical for the scalable production of porous 3-D graphene sponges, which can be successfully used for efficient and cost-effective oil spill clean-ups and water purification for environmental applications.

Graphical abstract: Selective adsorption of oil–water mixtures using polydimethylsiloxane (PDMS)–graphene sponges

Supplementary files

Article information

Article type
Paper
Submitted
06 Feb 2015
Accepted
12 Mar 2015
First published
12 Mar 2015

Environ. Sci.: Water Res. Technol., 2015,1, 298-305

Selective adsorption of oil–water mixtures using polydimethylsiloxane (PDMS)–graphene sponges

D. N. H. Tran, S. Kabiri, T. R. Sim and D. Losic, Environ. Sci.: Water Res. Technol., 2015, 1, 298 DOI: 10.1039/C5EW00035A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements