A radially confined point discharge microplasma for a miniaturized optical emission spectrometer

Abstract

A novel radial confined point discharge microplasma optical emission spectrometer (RC-PD-OES) with high excitation capability was fabricated by arranging a hollow electrode and a tungsten rod electrode perpendicularly in a tiny inner diameter T-shaped quartz tube. The analyte-containing vapor was introduced into the microplasma region through the hollow electrode, and the narrow quartz tube limited its radial diffusion to make it completely interact with the microplasma, thus achieving sufficient atomization and excitation. The emission spectral characteristics and the plasma parameter diagnostics of two different physical sizes of PD devices further demonstrated that the radial confined effect could enhance the excitation capability of the microplasma. The hollow electrode and the W rod electrode were placed perpendicularly to collect stronger spectral emission signals from the axial view. Combined with hydride generation (HG) for sample introduction, the RC-PD-OES was used for the highly sensitive determination of As, Sb, Ge, Pb, Hg, Se, and Sn. Under the selected conditions, the limits of detection (LODs) of As, Sb, Ge, Pb, Hg, Se, and Sn were 1, 0.4, 0.5, 0.06, 0.09, 6, and 0.2 μg L-1, respectively, and the relative standard deviations (RSDs) were all less than 3.3%. The proposed HG-RC-PD-OES features simplicity, compactness, high sensitivity and robustness, making it promising for field analysis of these trace elements.

Supplementary files

Article information

Article type
Technical Note
Submitted
24 Mar 2025
Accepted
12 May 2025
First published
14 May 2025

J. Anal. At. Spectrom., 2025, Accepted Manuscript

A radially confined point discharge microplasma for a miniaturized optical emission spectrometer

W. Zeng, T. Lin, Q. Tang, X. Jiang and X. Hou, J. Anal. At. Spectrom., 2025, Accepted Manuscript , DOI: 10.1039/D5JA00112A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements