Issue 1, 2012

Multifunctional superhydrophobic composite films from a synergistic self-organization process

Abstract

A synergistic self-organization method was proposed to prepare multifunctional superhydrophobic composite films, which combined well-exfoliated graphene nanosheets (GNs) with a conjugate polymer (poly(3-hexyl thiophene), P3HT) through a simple solution-deposition process. The composite film can be rapidly prepared on various substrates; typically only a few minutes were necessary when the P3HT-GN suspension was coated on a metal mesh. The 35 wt% P3HT composite film is superhydrophobic with a contact angle of 159.2°, an electrical conductivity up to 6560 S m−1 and specific electromagnetic interference shielding effectiveness (43.7 dB cm3 g−1) four times greater than solid copper. It has a porous structure with the bulk density of 0.76 g cm−3, separation efficiency of over 98% for the n-octane/water mixtures in volume ratios of 1 : 1–1 : 15, and good environmental stability with a capacity to endure thermal treatment at 200 °C and organic solvents such as methanol, acetone and DMFetc. This synergistic self-organization method was also applied to prepare superhydrophobic P3HT-montmorillonite (MMT) composite films with a contact angle of 161° and a high adhesion capacity to water droplets, proving a versatile method in fabricating functional superhydrophobic films suited to practical applications.

Graphical abstract: Multifunctional superhydrophobic composite films from a synergistic self-organization process

Supplementary files

Article information

Article type
Paper
Submitted
11 Jul 2011
Accepted
07 Sep 2011
First published
27 Sep 2011

J. Mater. Chem., 2012,22, 109-114

Multifunctional superhydrophobic composite films from a synergistic self-organization process

M. Fang, Z. Tang, H. Lu and S. Nutt, J. Mater. Chem., 2012, 22, 109 DOI: 10.1039/C1JM13213J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Spotlight

Advertisements