Silica hybrid particles with nanometre polymer shells and their influence on the toughening of polypropylene
Abstract
Colloidal :
monomer ratio from 1
:
1 to 4
:
1, the poly(MMA-co-BA) shell thickness on the
Maintenance work is planned from 21:00 BST on Sunday 18th August 2024 to 21:00 BST on Monday 19th August 2024, and on Thursday 29th August 2024 from 11:00 to 12:00 BST.
During this time the performance of our website may be affected - searches may run slowly, some pages may be temporarily unavailable, and you may be unable to log in or to access content. If this happens, please try refreshing your web browser or try waiting two to three minutes before trying again.
We apologise for any inconvenience this might cause and thank you for your patience.
* Corresponding authors
a
State Key Laboratory of Material Processing and Die & Mould Technology, School of Chemistry and Chemical Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
E-mail:
xlxie@mail.hust.edu.cn
Tel: +86-27-87540053
b
Centre for Advanced Materials Technology (CAMT), School of Aerospace, Mechanical and Mechatronic Engineering J07, University of Sydney, Sydney, NSW 2006, Australia
E-mail:
yiu-wing.mai@sydney.edu.au
Tel: +61-2-9351-2290
Colloidal :
monomer ratio from 1
:
1 to 4
:
1, the poly(MMA-co-BA) shell thickness on the
J. Zheng, X. Zhou, X. Xie and Y. Mai, Nanoscale, 2010, 2, 2269 DOI: 10.1039/B9NR00344D
To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.
If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.
If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.
Read more about how to correctly acknowledge RSC content.
Fetching data from CrossRef.
This may take some time to load.
Loading related content