Issue 23, 2003

Gas-phase synthesis, structure and surface acid–base properties of highly dispersed vanadia/titania/silica catalysts

Abstract

The atomic layer deposition (ALD) method based on surface-saturating gas-solid reactions was applied to grow vanadia species on highly dispersed titania/silica supports with from submono- to above monolayer levels of titania. The physicochemical properties of the V2O5/TiO2/SiO2 catalysts were examined with N2 adsorption, XRD, XPS and Raman spectroscopy techniques. The catalysts were compared to the corresponding titania supported catalysts, and besides a series of liquid-phase impregnated samples were characterized for comparison. In the ALD catalysts, isolated and highly dispersed tetracoordinated VOx species were formed on titania/silica supports with only small impact on the surface area and porosity of the support. Vanadia was homogeneously associated with both the surface titania species and the uncovered silica support. However, in the impregnated catalysts, crystalline vanadia at low titania coverage and TiOx agglomeration at high titania level decreased the surface area. Vanadia had also a preferential interaction with the titania phase. Moreover, the better dispersion of the active species in the ALD catalysts was confirmed by XPS of NH3 adsorption and microcalorimetry of NH3 and SO2 adsorption. The number and strength of acid–base sites on the surface of the catalysts were directly related to the V–O–Ti and V–O–Si concentrations as well as to the titania and vanadia dispersion in the samples, in favor of the ALD catalysts.

Article information

Article type
Paper
Submitted
11 Jul 2003
Accepted
08 Oct 2003
First published
29 Oct 2003

Phys. Chem. Chem. Phys., 2003,5, 5333-5342

Gas-phase synthesis, structure and surface acid–base properties of highly dispersed vanadia/titania/silica catalysts

J. Keränen, C. Guimon, A. Auroux, E. I. Iiskola and L. Niinistö, Phys. Chem. Chem. Phys., 2003, 5, 5333 DOI: 10.1039/B307902C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements