A novel nickel catalyst supported on fly ash-derived zeolite ZK-14 for CO2 Methanation via in situ reduction

Abstract

Coal-fired power generation not only emits substantial amounts of carbon dioxide (CO2) but also produces the by-product fly ash, causing environmental pollution. Therefore, there is an urgent need for innovative technologies to repurpose waste fly ash and convert CO2 into clean energy sources. In this study, fly ash was used as the raw material to synthesize Ni/zeolite ZK-14 catalysts via an alkali fusion-hydrothermal method and in situ reduction. Under the optimize condition, the Ni/zeolite ZK-14 catalyst with 30 wt% Ni loading exhibited superior catalytic performance for CO2-to-CH4 directional conversion, with a CO2 conversion of 54.6% and a CH4 selectivity of 98.7% at 300 °C. The superior catalytic performance observed in CO2 methanation can be primarily attributed to the presence of highly dispersed Ni nanoparticles (NPs), abundant weakly basic sites, and the oxygen vacancies on the catalyst. In addition, in situ DRIFTS analysis reveals the formation of HCOO* intermediates, suggesting that 30 wt% Ni/zeolite ZK-14 proved the CO2 methanation reaction via the formate pathway. This study presents a viable strategy for developing fly ash-derived zeolite catalysts for low-temperature CO₂ methanation.

Supplementary files

Article information

Article type
Paper
Accepted
09 Feb 2026
First published
12 Feb 2026

New J. Chem., 2026, Accepted Manuscript

A novel nickel catalyst supported on fly ash-derived zeolite ZK-14 for CO2 Methanation via in situ reduction

K. Chen, J. Li, Y. Wang, Y. Dai, Y. Luo, X. Cao and X. Xing, New J. Chem., 2026, Accepted Manuscript , DOI: 10.1039/D6NJ00135A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements